PAA132

PAA132
Dual Single-Pole, Normally Open
OptoMOS® Relays
INTEGRATED CIRCUITS DIVISION
Parameter
Blocking Voltage
Load Current
Input Control Current
On-Resistance (max)
Rating
60
600
2
1
Units
VP
mArms / mADC
mA

Features
•
•
•
•
•
•
•
•
•
•
Description
The PAA132 Solid State Relay has two independent,
single-pole, normally open (1-Form-A), relays in a
single 8-pin package. It employs optically coupled
MOSFET technology to provide 3750Vrms of input to
output isolation.
Its optically coupled outputs, which use the patented
OptoMOS architecture, are controlled by a highly
efficient GaAIAs infrared LED.
Low Input Control Current: 2mA
3750Vrms Input/Output Isolation
TTL/CMOS Compatible
No Moving Parts
High Reliability
Arc-Free With No Snubbing Circuits
No EMI/RFI Generation
Small 8-Pin Package
Machine Insertable, Wave Solderable
Surface Mount Tape & Reel Version Available
By incorporating two independent, single-pole relays
into a single 8-pin package, the PAA132 saves board
space by providing a more compact design solution
than two discrete single-pole relays in a variety of
applications.
Approvals
Applications
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
• Automotive
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Certified Component:
TUV Certificate B 09 07 49410 004
Ordering Information
Part #
PAA132
PAA132S
PAA132STR
Description
8-Pin DIP (50/Tube)
8-Pin Surface Mount (50/Tube)
8-Pin Surface Mount (1,000/Reel)
Pin Configuration
+ Control - Switch #1
- Control - Switch #1
+ Control - Switch #2
- Control - Switch #2
AC/DC Configuration
1
8
2
7
3
6
4
5
Load - Switch #1
Load - Switch #1
Load - Switch #2
Load - Switch #2
Switching Characteristics
of Normally Open Devices
Form-A
IF
90%
10%
ILOAD
ton
Pb
DS-PAA132-R04
toff
e3
www.ixysic.com
1
INTEGRATED CIRCUITS DIVISION
PAA132
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation 1
Total Power Dissipation 2
Isolation Voltage, Input to Output
Operational Temperature
Storage Temperature
1
Derate linearly 1.33 mW / ºC
2
Derate linearly 6.67 mW / ºC
Ratings
60
5
50
1
150
800
3750
-40 to +85
-40 to +125
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Units
VP
V
mA
A
mW
mW
Vrms
°C
°C
Electrical Characteristics @ 25ºC
Parameter
Output Characteristics
Load Current
Continuous 1
Peak
On-Resistance
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics
Input Control Current to Activate
Input Control Current to Deactivate
Input Voltage Drop
Reverse Input Current
Common Characteristics
Capacitance Input to Output
1
Conditions
Symbol
Min
Typ
Max
Units
t≤10ms
IL=600mA
VL=60VP
IL
ILPK
RON
ILEAK
-
0.85
-
600
±2
1
1
mArms / mADC
AP

VL=50V, f=1MHz
ton
toff
COUT
-
25
5
2
-
ms
ms
pF
IL = 600mA
IF = 10mA
VR = 5V
IF
IF
VF
IR
0.2
0.9
-
1.2
-
2
1.4
10
mA
mA
V
A
-
CI/O
-
3
-
pF
IF = 5mA, VL = 10V
A
If both poles operate, then the load current must be derated so that the package power dissipation value is not exceeded.
2
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
PAA132
PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
25
Device Count (N)
Device Count (N)
30
25
20
15
10
5
20
15
10
5
1.17
1.19
1.21
1.23
1.25
0.75
0.80
0.85
LED Forward Voltage Drop (V)
20
20
15
10
5
0
0.90
0.95
1.00
0.41
0.43
0.45
0.47
0.49
10
5
0.29
0.31
0.33
0.35
0.37
0.39
0.41
Turn-On Time (ms)
Turn-Off Time (ms)
Typical IF for Switch Dropout
(N=50, IL=600mA)
Typical On-Resistance Distribution
(N=50, IF=5mA, IL=600mA)
35
30
15
10
5
25
20
15
10
5
0
0.39
15
1.05
Device Count (N)
25
Device Count (N)
Device Count (N)
Typical IF for Switch Operation
(N=50, IL=600mA)
25
20
0
0
0
Typical Turn-Off Time
(N=50, IF=5mA, IL=100mA)
25
Device Count (N)
35
Typical Turn-On Time
(N=50, IF=5mA, IL=100mA)
0
0.51
0.39
0.41
LED Current (mA)
0.43
0.45
0.47
0.49
0.83
0.51
0.84
0.85
0.86
0.87
0.88
0.89
On-Resistance (:)
LED Current (mA)
Typical Blocking Voltage Distribution
(N=50)
35
Device Count (N)
30
25
20
15
10
5
0
69.0
69.5
70.0
70.5
71.0
71.5
72.0
Blocking Voltage (VP)
Typical Turn-On Time
vs. LED Forward Current
(IL=80mA)
1.5
1.4
IF=50mA
1.3
IF=20mA
1.2
IF=10mA
IF=5mA
IF=2mA
IF=1mA
1.1
1.0
-40
-20
0
20
40
60
80
Temperature (ºC)
100
120
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Typical Turn-Off Time
vs. LED Forward Current
(IL=80mA)
0.7
0.6
Turn-Off Time (ms)
1.6
Turn-On Time (ms)
LED Forward Voltage Drop (V)
Typical LED Forward Voltage
vs. Temperature
0.5
0.4
0.3
0.2
0.1
0
0
5
10
15
20
25
30
35
40
LED Forward Current (mA)
45
50
0
5
10
15
20
25
30
35
40
45
50
LED Forward Current (mA)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R04
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
PAA132
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
I F = 5mA
I F = 10mA
-20
-40
1.2
0
20
40
60
80
100
0.60
0.55
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
-40
0
20
40
60
80
0.4
0
60
20
40
Temperature (ºC)
80
0.8
0.6
0.4
100
-40
Maximum Load Current
vs. Temperature
(IF=2mA)
0.66
Blocking Voltage (VP)
0.54
One Pole Operating
0.42
Two Poles Operating
0.24
0.18
0.12
0
20
40
60
80
Temperature (ºC)
100
120
0
20
40
60
Temperature (ºC)
80
100
400
200
0
-200
-400
-20
0
20
40
60
Temperature (ºC)
80
-600
-0.6
100
-0.4
-0.2
0
0.2
0.4
0.6
Load Voltage (V)
72
0.016
70
0.014
68
66
64
62
Typical Leakage vs. Temperature
Measured Across Pins 5&6, 7&8
(VP=60V)
0.012
0.010
0.008
0.006
0.004
60
0.002
58
-20
-20
Typical Load Current vs. Load Voltage
(IF=2mA)
Typical Blocking Voltage
vs. Temperature
0.60
-40
0.7
600
Leakage (PA)
-20
0.8
-40
0
-40
0.9
0.6
0.2
0
1.0
100
Load Current (mA)
LED Current (mA)
LED Current (mA)
-20
1.0
0.2
Load Current (A)
IF = 5mA
Typical IF for Switch Dropout
vs. Temperature
(IL=300mA)
0.6
0.30
IF = 10mA
Typical IF for Switch Operation
vs. Temperature
(IL=300mA)
0.8
0.36
1.1
Temperature (ºC)
1.2
Typical On-Resistance
vs. Temperature
(IF=2mA, IL=600mA)
1.2
Temperature (ºC)
1.0
0.48
Typical Turn-Off Time
vs. Temperature
(IL=80mA)
On-Resistance (:)
Typical Turn-On Time
vs. Temperature
(IL=80mA)
Turn-Off Time (ms)
Turn-On Time (ms)
PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
-40
-20
0
20
40
60
Temperature (ºC)
80
100
0
-40
-20
0
20
40
60
80
100
Temperature (ºC)
Load Current (A)
Energy Rating Curve
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
10Ps 100Ps 1ms 10ms 100ms
1s
10s 100s
Time
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
PAA132
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
PAA132 / PAA132S
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
PAA132 / PAA132S
250ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
Pb
R04
e3
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
PAA132
Mechanical Dimensions
PAA132
2.540 ± 0.127
(0.100 ± 0.005)
9.652 ± 0.381
(0.380 ± 0.015)
8-0.800 DIA.
(8-0.031 DIA.)
2.540 ± 0.127
(0.100 ± 0.005)
9.144 ± 0.508
(0.360 ± 0.020)
6.350 ± 0.127
(0.250 ± 0.005)
Pin 1
PCB Hole Pattern
7.620 ± 0.254
(0.300 ± 0.010)
6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
3.302 ± 0.051
(0.130 ± 0.002)
7.620 ± 0.127
(0.300 ± 0.005)
7.239 TYP.
(0.285)
4.064 TYP
(0.160)
0.254 ± 0.0127
(0.010 ± 0.0005)
7.620 ± 0.127
(0.300 ± 0.005)
Dimensions
mm
(inches)
0.813 ± 0.102
(0.032 ± 0.004)
PAA132S
9.652 ± 0.381
(0.380 ± 0.015)
2.540 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
Pin 1
0.635 ± 0.127
(0.025 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
9.525 ± 0.254
(0.375 ± 0.010)
0.457 ± 0.076
(0.018 ± 0.003)
PCB Land Pattern
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
7.620 ± 0.254
(0.300 ± 0.010)
0.254 ± 0.0127
(0.010 ± 0.0005)
0.65
(0.0255)
4.445 ± 0.127
(0.175 ± 0.005)
Dimensions
mm
(inches)
0.813 ± 0.102
(0.032 ± 0.004)
6
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
PAA132
PAA132STR Tape & Reel
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
K0 =4.90
(0.193)
K1 =4.20
(0.165)
Embossed Carrier
Embossment
W=16.00
(0.63)
Bo=10.30
(0.406)
Ao=10.30
(0.406)
P=12.00
(0.472)
User Direction of Feed
Dimensions
mm
(inches)
NOTES:
1. Dimensions carry tolerances of EIA Standard 481-2
2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to
its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
7
Specification: DS-PAA132-R04
©Copyright 2012, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/22/2012