PAA193

PAA193
Dual Single-Pole, Normally Open
OptoMOS® Relays
INTEGRATED CIRCUITS DIVISION
Parameter
Load Voltage
Load Current
On-Resistance (max)
Rating
600
100
50
Units
VP
mArms / mADC

Features
• 5000Vrms Input/Output Isolation
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Small 8-Pin Package
• Machine Insertable, Wave Solderable
• Surface Mount Tape & Reel Version Available
Description
The PAA193 is a dual normally open (1-Form-A) solid
state relay that uses optically coupled relay technology
to provide an enhanced 5000Vrms input to output
isolation barrier. The efficient MOSFET switches use
IXYS IC Division's patented OptoMOS architecture.
Highly efficient GaAIAs infrared LEDs provide the
optically coupled control.
Dual OptoMOS relays provide a more compact design
solution than discrete single-pole relays in a variety
of applications. The dual relays save board space by
incorporating two relays in a single 8-pin package.
Approvals
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Certified Component:
TUV Certificate B 09 07 49410 004
Applications
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Ordering Information
Part #
PAA193
PAA193S
PAA193STR
Description
8-Lead DIP (50/tube)
8-Lead Surface Mount (50/tube)
8-Lead Surface Mount (1000/Reel)
Pin Configuration
+ Control - Switch #1
- Control - Switch #1
+ Control - Switch #2
- Control - Switch #2
1
8
2
7
3
6
4
5
Load - Switch #1
Load - Switch #1
Load - Switch #2
Load - Switch #2
Switching Characteristics
of Normally Open Devices
Form-A
IF
90%
10%
ILOAD
ton
Pb
DS-PAA193-R03
toff
e3
www.ixysic.com
1
INTEGRATED CIRCUITS DIVISION
PAA193
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation 1
Total Power Dissipation 2
Isolation Voltage, Input to Output
Operational Temperature
Storage Temperature
1
Derate linearly 1.33 mW / ºC
2
Derate linearly 6.67 mW / ºC
Ratings
600
5
50
1
150
800
5000
-40 to +85
-40 to +125
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Units
VP
V
mA
A
mW
mW
Vrms
°C
°C
Electrical Characteristics @ 25ºC
Parameter
Output Characteristics
Load Current
Continuous *
Peak
On-Resistance
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics
Input Control Current to Activate
Input Voltage Drop
Reverse Input Current
Common Characteristics
Capacitance, Input to Output
Conditions
Symbol
Min
Typ
Max
Units
t=10ms
IL=100mA
VL=600VP
IL
ILPK
RON
ILEAK
-
-
100
±350
50
10
mArms / mADC
mAP

µA
VL=50V, f=1MHz
ton
toff
COUT
-
50
5
5
-
IL=100mA
IF=5mA
VR=5V
IF
VF
IR
0.9
-
1.2
-
5
1.4
10
mA
V
µA
-
CI/O
-
3
-
pF
IF=5mA, VL=10V
ms
pF
*NOTE: If both poles operate simultaneously, then load current must be derated in order not to exceed the package power dissipation value.
2
www.ixysic.com
R03
INTEGRATED CIRCUITS DIVISION
PAA193
PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
25
Device Count (N)
Device Count (N)
30
25
20
15
10
Typical Turn-Off Time
(N=50, IF=5mA, IL=120mADC)
35
30
20
Device Count (N)
35
Typical Turn-On Time
(N=50, IF=5mA, IL=120mADC)
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
15
10
5
0
1.25
1.27
1.28
15
10
0
0.64
1.30
1.29
0.68
0.72
0.76
0.80
0.88
0.92
0.20
0.22
0.24
0.26
0.28
0.30
LED Forward Voltage Drop (V)
Turn-On Time (ms)
Turn-Off Time (ms)
Typical IF for Switch Operation
(N=50, IL=120mADC)
Typical IF for Switch Dropout
(N=50, IL=120mADC)
Typical On-Resistance Distribution
(N=50, IL=120mADC)
25
15
10
5
0
35
30
20
Device Count (N)
20
Device Count (N)
Device Count (N)
25
1.26
20
5
5
0
25
15
10
5
0.65
0.91
1.17
1.43
1.69
20
15
10
5
0
0.39
25
0
1.95
0.39
0.65
LED Current (mA)
0.91
1.17
1.43
1.69
34.3
1.95
34.6
LED Current (mA)
34.9
35.2
35.5
35.8
36.1
On-Resistance (:)
Typical Blocking Voltage Distribution
(N=50)
35
Device Count (N)
30
25
20
15
10
5
0
777
782
787
792
797
802
807
Blocking Voltage (VP)
Typical Turn-On Time
vs. LED Forward Current
(IL=50mADC)
1.6
1.4
IF=50mA
1.2
IF=10mA
IF=5mA
1.0
0.8
-40
-20
0
20
40
60
Temperature (ºC)
80
100
120
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Typical Turn-Off Time
vs. LED Forward Current
(IL=50mADC)
0.7
0.6
Turn-Off Time (ms)
1.8
Turn-On Time (ms)
LED Forward Voltage Drop (V)
Typical LED Forward Voltage Drop
vs. Temperature
0.5
0.4
0.3
0.2
0.1
0
0
5
10
15
20
25
30
35
40
LED Forward Current (mA)
45
50
0
5
10
15
20
25
30
35
40
45
50
LED Forward Current (mA)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R03
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
PAA193
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
IF=5mA
IF=10mA
-40
3.0
-20
0
20
40
60
80
140
Two Poles Operating
100
80
60
Single Pole Operating
0
20
40
60
80
-40
100
-20
0
20
40
60
80
100
Temperature (ºC)
Temperature (ºC)
Temperature (ºC)
Typical IF for Switch Operation
vs. Temperature
(IL=50mADC)
Typical IF for Switch Dropout
vs. Temperature
(IL=50mADC)
Typical On-Resistance
vs. Temperature
(IF=5mA, IL=50mADC Instantaneous)
3.0
80
60
1.5
1.0
2.0
1.5
1.0
0.5
0.5
0
0
-20
150
0
20
40
60
80
On-Resistance (:)
2.0
100
40
30
20
0
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
Temperature (ºC)
Temperature (ºC)
Temperature (ºC)
Typical Load Current
vs. Load Voltage
(IF=5mA)
Maximum Load Current
vs. Temperature
(IF=5mA)
Typical Blocking Voltage
vs. Temperature
180
50
0
-50
-100
140
Single Pole Operation
120
100
Two Pole Operation
80
60
40
20
0
-150
-2
0
2
4
-20
0
Output Voltage Drop (V)
20
40
60
80
0.030
Load Current (A)
Leakage (PA)
0.035
0.025
0.020
0.015
0.010
0.005
0
20
100
850
800
750
700
650
100
-40
120
-20
0
40
60
80
20
40
60
Temperature (ºC)
Energy Rating Curve
0.040
-20
80
900
Temperature (ºC)
Typical Leakage vs. Temperature
Measured across Pins 5&6 or 7&8
0
-40
100
600
-40
6
80
950
Blocking Voltage (VP)
Load Current (mA)
100
-4
50
10
160
-6
120
20
-20
2.5
-40
Typical On-Resistance
vs. Temperature
(IF=5mA, IL=100mADC)
40
-40
LED Current (mA)
LED Current (mA)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
100
2.5
Load Current (mA)
Typical Turn-Off Time
vs. Temperature
(IF=5mA, IL=50mADC)
On-Resistance (:)
Typical Turn-On Time
vs. Temperature
(IL=50mADC)
Turn-Off Time (ms)
Turn-On Time (ms)
PERFORMANCE DATA @25ºC (Unless Otherwise Noted)*
100
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
10Ps 100Ps 1ms 10ms 100ms
Temperature (ºC)
1s
10s
100s
Time
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.ixysic.com
R03
INTEGRATED CIRCUITS DIVISION
PAA193
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
PAA193 / PAA193S
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
PAA193 / PAA193S
250ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
Pb
R03
e3
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
PAA193
Mechanical Dimensions
PAA193
2.540 ± 0.127
(0.100 ± 0.005)
9.652 ± 0.381
(0.380 ± 0.015)
8-0.800 DIA.
(8-0.031 DIA.)
2.540 ± 0.127
(0.100 ± 0.005)
9.144 ± 0.508
(0.360 ± 0.020)
6.350 ± 0.127
(0.250 ± 0.005)
Pin 1
PCB Hole Pattern
7.620 ± 0.254
(0.300 ± 0.010)
6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
3.302 ± 0.051
(0.130 ± 0.002)
7.620 ± 0.127
(0.300 ± 0.005)
7.239 TYP.
(0.285)
4.064 TYP
(0.160)
0.254 ± 0.0127
(0.010 ± 0.0005)
7.620 ± 0.127
(0.300 ± 0.005)
Dimensions
mm
(inches)
0.813 ± 0.102
(0.032 ± 0.004)
PAA193S
9.652 ± 0.381
(0.380 ± 0.015)
2.540 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
Pin 1
0.635 ± 0.127
(0.025 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
9.525 ± 0.254
(0.375 ± 0.010)
0.457 ± 0.076
(0.018 ± 0.003)
PCB Land Pattern
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
7.620 ± 0.254
(0.300 ± 0.010)
0.254 ± 0.0127
(0.010 ± 0.0005)
0.65
(0.0255)
4.445 ± 0.127
(0.175 ± 0.005)
Dimensions
mm
(inches)
0.813 ± 0.102
(0.032 ± 0.004)
6
www.ixysic.com
R03
INTEGRATED CIRCUITS DIVISION
PAA193
PAA193STR Tape & Reel
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
K0 =4.90
(0.193)
K1 =4.20
(0.165)
Embossed Carrier
Embossment
W=16.00
(0.63)
Bo=10.30
(0.406)
Ao=10.30
(0.406)
P=12.00
(0.472)
User Direction of Feed
Dimensions
mm
(inches)
NOTES:
1. Dimensions carry tolerances of EIA Standard 481-2
2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to
its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
7
Specification: DS-PAA193-R03
©Copyright 2012, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/22/2012