MSAU100 SERIES DC/DC CONVERTER 1W, SMD-Package FEATURES ►SMD Package with Industry Standard Pinout ►Package Dimension: 12.7 x 8.0 x 7.1 mm (0.5"x 0.31"x 0.28") ►I/O-Isolation 1000 VDC ►Operating Temp. Range –40° to +85°C ►High Accuracy of Pin Planarity ►Qualified for lead-free reflow solder process according IPC/JEDEC J-STD-020D.1 ►Tape & Reel Package available ►3 Year Product Warranty PRODUCT OVERVIEW The MINMAX MSAU100 series is a range of 1W DC/DC converters in a SMD- Package featuring I/O-isolation of 1000VDC.The small footprint makes this product the ideal solution for many applications where a voltage has to be isolated i.e for noise reduction, ground loop elimination, in digital interfaces or where a converted voltage is required. An excellent efficiency allows an operating temperature range of–40°C to +85°C. These converters are fully qualified for the higher temperature profile used in lead-free reflow solder processes. For automated SMD production lines the product can also be supplied in tape& reel package. Model Selection Guide Model Input Output Number Voltage Voltage (Range) Output Current Input Current Load Max. capacitive Regulation Load Efficiency (typ.) Max. Min. @Max. Load @No Load VDC mA mA mA(typ.) mA(typ.) 3.3 300 6 264 5 200 4 250 9 110 2 254 12 84 1.5 252 8 80 MSAU104 15 67 1 248 7 81 MSAU115 3.3 300 6 110 8 75 MSAU111 5 200 4 103 8 81 9 110 2 106 12 84 1.5 104 5 81 82 VDC MSAU105 MSAU101 5 MSAU102 (4.5 ~ 5.5) MSAU103 12 MSAU112 (10.8 ~ 13.2) MSAU113 @Max. Load % (max.) μF 10 10 80 10 30 33 8 15 % 75 33 78 78 MSAU114 15 67 1 102 5 MSAU125 3.3 300 6 57 8 73 MSAU121 5 200 4 53 8 79 24 MSAU122 (21.6 ~ 26.4) MSAU123 MSAU124 9 110 2 54 12 84 1.5 53 5 8 80 15 67 1 52 5 80 8 33 77 Input Specifications Parameter Input Voltage Range Input Surge Voltage (1 sec. max.) Model Min. Typ. Max. 5V Input Models 4.5 5 5.5 12V Input Models 10.8 12 13.2 24V Input Models 21.6 24 26.4 5V Input Models -0.7 --- 9 12V Input Models -0.7 --- 18 24V Input Models -0.7 --- 30 --- --- 0.3 --- --- Reverse Polarity Input Current All Models Internal Filter Type Internal Power Dissipation E-mail:[email protected] 2014/11/13 REV:6 Tel:886-6-2923150 Page 1 of 4 Unit VDC A Internal Capacitor 450 mW MSAU100 SERIES DC/DC CONVERTER 1W, SMD-Package Output Specifications Parameter Conditions Output Voltage Accuracy Line Regulation For Vin Change of 1% Load Regulation Io=20% to 100% Ripple & Noise 0-20 MHz Bandwidth Min. Typ. Max. Unit --- ±1.0 ±3.0 % --- ±1.2 ±1.5 % See Model Selection Guide Temperature Coefficient --- --- 120 mV P-P --- ±0.01 ±0.02 %/℃ Short Circuit Protection 0.5 Second Max. General Specifications Parameter Conditions Min. Typ. Max. Unit 60 Seconds 1000 --- --- VDC I/O Isolation Resistance 500 VDC 1000 --- --- MΩ I/O Isolation Capacitance 100KHz, 1V --- 40 100 pF 50 100 140 KHz I/O Isolation Voltage Switching Frequency MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign Moisture Sensitivity Level (MSL) 2,000,000 IPC/JEDEC J-STD-020D.1 Hours Level 3 Environmental Specifications Parameter Operating Ambient Temperature Range (See Power Derating Curve) Conditions Min. Max. Unit Natural Convection -40 +85 ℃ ℃ Case Temperature --- +90 Storage Temperature Range -50 +125 ℃ Humidity (non condensing) --- 95 % rel. H 260 ℃ Cooling Free-Air convection Lead Temperature (1.5mm from case for 10Sec.) --- Power Derating Curve 100 Natural Convection 20LFM 80 Output Power (%) Output Power (%) 100LFM 60 200LFM 400LFM 40 20 0 ~ -40 0 20 40 60 80 100 110 Ambient Temperature ] (5V & 12Vin) (24Vin) Notes 1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. 2 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; 3 We recommend to protect the converter by a slow blow fuse in the input supply line. however they may not meet all specifications listed. 4 Other input and output voltage may be available, please contact factory. 5 That “natural convection” is about 20LFM but is not equal to still air (0 LFM). 6 Specifications are subject to change without notice. E-mail:[email protected] 2014/11/13 REV:6 Tel:886-6-2923150 Page 2 of 4 MSAU100 SERIES DC/DC CONVERTER 1W, SMD-Package Package Specifications 0.3 [0.01] 2.3 [0.09] 7.1 0.5 [0.28 0.02] 2.54 [0.10] SEATING PLANE S A 7.0 [0.28] 0.15 S 9.2 [0.36] 2 4 3 0.25 [0.01] R0 .5 1 ( Magnification of A ) 7.62 [0.1] 2.15 [0.08] 2.54 [0.1] 10.45 [0.41] Top View 7.62 [0.30] 0~ 4 5 6 11.2 [0.44] 7 Connecting Pin Patterns 8.3 [0.33] Mechanical Dimensions (24V Input) 8 1.2 [0.05] 12.7 [0.5] 0.60 [0.02] 8.05 0.5 [0.32 0.02] 0.25 [0.01] 7.8 [0.31] 2.54 [0.10] Pin Connections Pin S -Vin 2 +Vin 3 NA 4 -Vout 5 +Vout 6 NA 7 NA 8 NA A ►All dimensions in mm (inches) ►Tolerance: X.X±0.25 (X.XX±0.01) 7.4 [0.29] 9.0 [0.35] X.XX±0.13 ( X.XXX±0.005) 0.15 S ►Pins ±0.05 (±0.002) Case Size (5V&12V Input) : 12.7x8.0x6.8mm (0.50x0.31x0.27 inches) Case Size (24V Input) : 12.7x8.3x7.8mm (0.50x0.33x0.31 inches) Case Material : Molding (flammability to UL 94V-0 rated) Weight (5V&12V Input) : 1.5g Weight (24V Input) : 1.8g NA : Not Available for Electrical Connection E-mail:[email protected] Tel:886-6-2923150 Page 3 of 4 1.2 [0.05] SEATING PLANE Physical Characteristics Function 1 2014/11/13 REV:6 12.6 [0.50] 0.60 [0.02] 0.3 [0.01] 6.8 [0.27] 12.7 [0.5] 12.6 [0.50] ( Magnification of A ) 8.0 [0.31] 7.62 [0.3] 8.3 [0.33] 2.54 [0.1] 10.3 [0.41] 4 3 7.62 [0.30] 0~ 4 2 R 1 0. 5 5 6 Top View Connecting Pin Patterns 11.2 [0.44] 7 8 8.0 [0.31] Mechanical Dimensions (5V & 12V Input) MSAU100 SERIES DC/DC CONVERTER 1W, SMD-Package Test Setup Input Reflected-Ripple Current Test Setup Input reflected-ripple current is measured with a inductor Lin (4.7μH) and Cin (220μF, ESR < 1.0Ω at 100 KHz) to simulate source impedance. Capacitor Cin, offsets possible battery impedance. Current ripple is measured at the input terminals of the module, measurement bandwidth is 0-500 KHz. To Oscilloscope + + Battery +Vin Lin DC / DC Converter Current Probe Cin +Out -Vin Load -Out Peak-to-Peak Output Noise Measurement Test Use a Cout 0.33μF ceramic capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is 0-20 MHz. Position the load between 50 mm and 75 mm from the DC/DC Converter. +Vin +Out Copper Strip Single Output DC / DC Converter -Vin Cout -Out Scope Resistive Load Copper Strip Technical Notes Maximum Capacitive Load The MSAU100 series has limitation of maximum connected capacitance at the output. The power module may be operated in current limiting mode during start-up, affecting the ramp-up and the startup time. For optimum performance we recommend 33μF maximum capacitive load. The maximum capacitance can be found in the data sheet. Input Source Impedance The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power module. In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup. Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality low Equivalent Series Resistance (ESR < 1.0Ω at 100 KHz) capacitor of a 2.2μF for the 5V input devices, a 1.0μF for the 12V input devices and a 0.47μF for the 24V input devices. + DC Power Source +Vin + +Out DC / DC Converter Load Cin - -Vin -Out Output Ripple Reduction A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. To reduce output ripple, it is recommended to use 0.47μF capacitors at the output. + +Vin DC Power Source - +Out Single Output DC / DC Converter -Vin Cout Load -Out Thermal Considerations Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and board spacing. To avoid exceeding the maximum temperature rating of the components inside the power module, the case temperature must be kept below 90℃. The derating curves are determined from measurements obtained in a test setup. Position of air velocity probe and thermocouple 15mm / 0.6in 50mm / 2in Air Flow DUT 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] Minmax Technology Co., Ltd. 2014/11/13 REV:6 Page 4 of 4