DATASHEET Rev. A JFC20 SERIES 2:1 Wide Input Voltage Range Single and Dual Outputs Industry Standard Package and Footprint 20 Watt DC/DC Power Converters FEATURES • 20 Watts Maximum Output Power • Single and Dual Outputs • Industry Standard Pin-Out • Small Size and Low Profile: 1.0” x 1.0” x 0.39” • 2:1 Wide Input Voltage Range • High Efficiency up to 92% • 1600VDC I/O Isolation • Ultra Low Quiescent Current APPLICATIONS • • • • Wireless Networks Telecom / Datacom Industry Control Systems Measurement Equipment • Semiconductor Equipment OPTIONS • Negative Remote ON/OFF • Without Trim Pin • Without ON/OFF Pin • Heatsink • Remote ON/OFF Control • Fixed Switching Frequency • Over Voltage, Over Load, and Short Circuit Protected • Six-Sided Continuous Shield • EMI Meets EN55022 Class A Without External Filter • CE Mark Meets 2006/95/EC, 93/68/EEC, and 2004/108/EC • UL60950-1, EN60950-1, and IEC60950-1 Safety Approvals • Compliant to RoHS EU Directive 2002/95/EC DESCRIPTION The JFC20 series of DC/DC power converters provides 20 watts of output power in a 1.0 x 1.0 x 0.39 inch industry standard package and footprint. This series has single and dual output models with 2:1 wide input voltage ranges of 918VDC, 18-36VDC, and 36-75VDC. Some features include high efficiency, ultra low quiescent current, 1600VDC I/O isolation, remote ON/OFF, and trimmable output voltage. This series is also protected against over voltage, over current, input under voltage, and short circuit conditions. All models are RoHS compliant and have UL60950-1, EN60950-1, and IEC60950-1 safety approvals. 06/01/2016 Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 5 JFC20 Series Single & Dual Outputs 2:1 Input Voltage Range 20 Watt DC/DC Power Converters Rev. B SPECIFICATIONS: JFC20 Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max 9 18 36 12 24 48 18 36 75 25 50 100 9 18 36 Unit INPUT SPECIFICATIONS Input Voltage Range Input Surge Voltage (1 sec max) Start-Up Voltage Shutdown Voltage Input Reflected Ripple Current Input Filter OUTPUT SPECIFICATIONS Output Voltage Line Regulation Load Regulation Cross Regulation (Dual Output Models) Voltage Adjustability (See Note 6) Voltage Accuracy Output Power Output Current Ripple & Noise (20MHz Bandwidth) Transient Response Recovery Time Start-Up Time 12VDC nominal input models 24VDC nominal input models 48VDC nominal input models 12VDC nominal input models 24VDC nominal input models 48VDC nominal input models 12VDC nominal input models 24VDC nominal input models 48VDC nominal input models 12VDC nominal input models 24VDC nominal input models 48VDC nominal input models Nominal Vin and full load 8 16 33 30 Over Load Protection Short Circuit Protection GENERAL SPECIFICATIONS Efficiency Switching Frequency Isolation Voltage (1 minute) Isolation Resistance Isolation Capacitance REMOTE ON/OFF (See Note 7) DC/DC ON DC/DC OFF DC/DC ON Negative Logic (option) DC/DC OFF Input Current of Remote Control Pin Remote Off State Input Current ENVIRONMENTAL SPECIFICATIONS Relative Humidity (non-condensing) Thermal Shock Vibration MTBF (See Note 1) PHYSICAL SPECIFICATIONS Weight Case Material Base Material Potting Material Dimensions (L x W x H) SAFETY & EMC CHARACTERISTICS Safety Approvals EMI (See Note 9) 25% load step change Nominal Vin and constant resistive load mAp-p -0.2 -0.5 -0.2 -1.0 -0.1 -0.8 -5 -10 -10 -1 +0.2 +0.5 +0.2 +1.0 +0.1 +0.8 +5 +20 +10 +1 20 % % % % % W 250 µs Power Up Remote ON/OFF 30 30 3.3V output models 5V output models 12V output models 15V output models 24V output models % of full load at nominal input 0 -0.02 +0.02 3.7 5.6 13.5 16.8 29.1 5.4 7.0 19.6 20.5 32.5 ms % %/°C VDC 150 Continuous, automatic recovery Nominal Vin and full load 3.3Vout, 5Vout Others Input to Output Input (Output) to Case 500VDC % See Table 248 297 1600 1000 1 Nominal Vin Nominal Vin -0.5 Without derating With derating -40 +60 275 330 Natural convection Natural convection with heatsink 303 363 1500 GΩ pF Open or 3V~ 15V Short or 0V ~ 1.2V Short or 0V ~ 1.2V Open or 3V ~ 15V +1.0 2.0 mA mA +60 +101 +105 +125 17.6 14.8 5 MIL-HDBK-217F, Full Load KHz VDC -55 °C °C °C °C/Watt 95 MIL-STD-810F MIL-STD-810F 1, 477, 000 Hours % RH 0.53oz (15g) Nickel-coated copper FR4 PCB Silicon (UL94-V0) 1.0 x 1.0 x 0.39 inches (25.4 x 25.4 x 9.9 mm) IEC60950-1, UL60950-1, EN60950-1 Class A, Class B EN55022 ESD EN61000-4-2 Radiated Immunity Fast Transient (See Note 10) Surge (See Note 10) Conducted Immunity Power Frequency Magnetic Field EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 06/01/2016 VDC See Table See Table Maximum Case Temperature Storage Temperature Thermal Impedance (See Note 8) VDC See Table Single Output Models Dual Output Models Single Output Models No load to full load Dual Output Models Single Output Models 10% Load to 90% Load Dual Output Models Asymmetrical load 25% to 100% full load 24Vout Single Output Models Others Low line to high line at full load Positive Logic (standard) Operating Ambient Temperature VDC Pi type Minimum Load Temperature Coefficient PROTECTION Over Voltage Protection VDC Air Contact ±8KV ±6KV 10 V/m ±2KV ±2KV 10 Vrms 100A/m continuous; 100A/m 1 second Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Page 2 of 5 JFC20 Series Single & Dual Outputs 2:1 Input Voltage Range 20 Watt DC/DC Power Converters Rev. B MODEL SELECTION TABLES SINGLE OUTPUT MODELS Model Number JFC12S3.3-20 JFC12S5-20 JFC12S12-20 JFC12S15-20 JFC12S24-20 JFC24S3.3-20 JFC24S5-20 JFC24S12-20 JFC24S15-20 JFC24S24-20 JFC48S3.3-20 JFC48S5-20 JFC48S12-20 JFC48S15-20 JFC48S24-20 Input Voltage Range 12 VDC (9 – 18 VDC) 24 VDC (18 – 36 VDC) 48 VDC (36 – 75 VDC) Output Voltage Output Current Min. Load Full Load Input Current Output (4) (3) (2) Ripple & Noise No Load Full Load Output Power Efficiency (4) Maximum (5) Capacitive Load 3.3 VDC 5 VDC 0mA 0mA 4500mA 4000mA 10mA 10mA 1510mA 1960mA 75mVp-p 75mVp-p 14.85W 20W 89% 89% 7000µF 5000µF 12 VDC 0mA 1670mA 10mA 1960mA 100mVp-p 20W 89% 850µF 15 VDC 24 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 1330mA 833mA 4500mA 4000mA 1670mA 1330mA 833mA 4500mA 4000mA 1670mA 1330mA 833mA 10mA 12mA 10mA 10mA 6mA 6mA 10mA 10mA 10mA 4mA 4mA 8mA 1960mA 746mA 969mA 969mA 958mA 373mA 490mA 484mA 484mA - 100mVp-p 75mVp-p 75mVp-p 75mVp-p 100mVp-p 100mVp-p 75mVp-p 75mVp-p 75mVp-p 100mVp-p 100mVp-p 75mVp-p 20W 20W 14.85W 20W 20W 20W 20W 14.85W 20W 20W 20W 20W 89% 90% 90% 91% 90% 91% 92% 90% 90% 90% 90% 91% 700µF 220µF 7000µF 5000µF 850µF 700µF 220µF 7000µF 5000µF 850µF 700µF 220µF- Output Voltage Output Current Output Power Efficiency (4) Maximum (5) Capacitive Load 20W 20W 20W 20W 20W 20W 20W 20W 20W 89% 90% 90% 90% 90% 91% 89% 90% 91% ±500µF ±350µF ±100µF ±500µF ±350µF ±100µF ±500µF ±350µF ±100µF DUAL OUTPUT MODELS Model Number JFC12D12-20 JFC12D15-20 JFC12D24-20 JFC24D12-20 JFC24D15-20 JFC24D24-20 JFC48D12-20 JFC48D15-20 JFC48D24-20 Input Voltage Range 12 VDC (9 – 18 VDC) 24 VDC (18 – 36 VDC) 48 VDC (36 – 75 VDC) ±12 VDC ±15 VDC ±24 VDC ±12 VDC ±15 VDC ±24 VDC ±12 VDC ±15 VDC ±24 VDC Min. Load Full Load 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA ±833mA ±667mA ±417mA ±833mA ±667mA ±417mA ±833mA ±667mA ±417mA Input Current Output (4) No Load (3) Full Load (2) Ripple & Noise 10mA 10mA 14mA 6mA 6mA 12mA 4mA 4mA 10mA 1960mA 1938mA 969mA 969mA 490mA 484mA - 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p NOTES 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40°C. MIL-HDBK-217F Notice2 @Ta=25°C, Full load (Ground, Benign, controlled environment). 2. Maximum value at nominal input voltage and full load. 3. Typical value at nominal input voltage and no load. 4. Single Outputs: 3.3-15V measured with 1µF M/C X7R and a 10µF T/C, 24V measured with 2 pcs of 6.8µF/50V X7R MLCC Dual Outputs: 12, 15V measured with 1µF M/C X7R and a 10µF T/C for each output, 24V measured with a 4.7µF/50V X7R MLCC for each output 5. Test by minimum Vin and constant resistive load. 6. Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external resistor between the TRIM pin and either the +Vout pin or the –Vout pin. 7. The ON/OFF control pin is referenced to –Vin. To order Negative Logic Remote ON/OFF add the suffix “R” to the model number. 8. Heatsink is optional and P/N: 7G-0047C-F. See “Product Standard Table” on page 5 for ordering information. 9. EN55022 1) To meet Class A the module needs no external components 2) To meet Class B please refer to the filter suggestion on page 4. 10. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor suggested is Nippon chemi-con KY series, 220μF /100V, ESR 48mΩ. 11. There are several different options available for this series. Please see the “Product Standard Table” on page 5 for all options and ordering information. CAUTION: This power module is not internally fused. An input line fuse must always be used. Due to advances in technology, specifications subject to change without notice. 06/01/2016 Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 5 JFC20 Series Single & Dual Outputs 2:1 Input Voltage Range 20 Watt DC/DC Power Converters Rev. B DERATING CURVES JFC48S5-20 Derating Curve JFC48S5-20 Derating Curve with Heatsink CHARACTERISTICS JFC48S5-20 Efficiency vs Input Voltage JFC48S5-20 Efficiency vs Output Load Recommended Filter for EN55022 Class B Compliance Recommended EN55022 Class B Filter Circuit Layout The components used in the figure above are as follows: C1, C2 C3 C4 & C5 N/A N/A 470pF/2KV 1808 MLCC 4.7µF/50V 1812 MLCC N/A N/A 470pF/2KV 1808 MLCC 2.2µF/100V 1812 MLCC 2.2µF/100V 1812 MLCC 2.2µF/100V 1812 MLCC 1000pF/2KV 1808 MLCC JFC20-12xxxx 4.7µF/25V 1812 MLCC JFC20-24xxxx JFC20-48xxxx C2 L1 325µH Common Choke PMT-050 325µH Common Choke PMT-050 325µH Common Choke PMT-050 MECHANICAL DRAWING 06/01/2016 Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 5 JFC20 Series Single & Dual Outputs 2:1 Input Voltage Range 20 Watt DC/DC Power Converters Rev. B Unit: inches (mm) PIN CONNECTIONS Pin Single Dual 1 +Input +Input 2 -Input -Input 3 ON/OFF ON/OFF 4 +Vout +Vout 5 Trim Common 6 -Vout -Vout EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. TRIM UP 6 TRIM DOWN 5 RU 5 RD 4 PRODUCT STANDARD TABLE Option Suffix Positive Remote ON/OFF (standard) No Suffix Negative Remote ON/OFF R Without ON/OFF Pin D 1. Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) Without ON/OFF & Trim Pin G Positive Remote ON/OFF without Trim Pin F 2. Pin Pitch Tolerance: ±0.01 (0.25) Negative Remote ON/OFF without Trim Pin RF COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 06/01/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive. Exeter, NH 03833 Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 5 of 5