RN142G Diodes PIN diode RN142G z Land size figure (Unit : mm) z External dimensions (Unit : mm) zApplications High frequency switching 0.13±0.03 0.5 1.4±0.05 1.0±0.05 zFeatures 1) Ultra small mold type. (VMD2) 2) High frequency resistance which is small and low capacity. 1.2 0.5 0.6±0.05 VMD2 zConstruction Silicon epitaxial planar 0.27±0.03 zStructure 0.5±0.05 ROHM : VMD2 dot (year week factory) z Taping specifications(Unit : mm) 0.18±0.05 φ1.5+0.1 0 2±0.05 φ0.5 4±0.1 0.76±0.1 2±0.05 8.0±0.3 0.1 0.4 2.1±0.1 1.11±0.05 3.5±0.05 1.75±0.1 4±0.1 0.3 0.65±0.05 zAbsolute maximum ratings (Ta=25°C) Parameter Reverse voltage Reverse current Junction temperature Storage temperature Limits 60 100 150 -55 to +150 Symbol VR IF Tj Tstg zElectrical characteristics (Ta=25°C) Parameter Symbol VF Forward voltage IR Reverse current Capacitance between terminals Ct High frequency resistance Rf Unit V mA ℃ ℃ Min. - Typ. - Max. 1 0.1 0.45 3 Unit V µA pF - - 2 Ω Ω Conditions IF=10mA VR=60V VR=1V , f=1MHz IF=3mA,f=100MHz IF=10mA,f=100MHz Rev.A 1/2 RN142G Diodes zElectrical characteristic curves (Ta=25°C) 100 1000 Ta=150℃ 100 Ta=125℃ 10 Ta=75℃ 1 Ta=25℃ 10 Ta=125℃ Ta=75℃ Ta=25℃ Ta=-25℃ 1 0.1 1 Ta=-25℃ 0.1 1.1 1.2 0.01 0 FORWARD VOLTAGE：VF(V) VF-IF CHARACTERISTICS 70 0 80 f=100MHz 1 FORWARD VOLTAGE:VF(mV) f=10MHz 0.1 0.1 1 10 820 AVE:828.3mV 810 10 100 FREQUENCY(MHz) Ct-f CHARACTERISTICS 1000 VF DISPERSION MAP 1 10 8 7 6 5 4 AVE:0.4448nA 2 2 Ta=25℃ f=1MHz VR=1V n=10pcs 0.9 CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=25℃ VR=60V n=30pcs 9 3 830 800 1 FORWARD CURRENT:IF(mA) rf-IF CHARACTERISTICS 0.8 0.7 0.6 0 0 IR DISPERSION MAP 1.7 1.4 0.3 0.1 Ta=25℃ f=100MHz IF=3mA n=10pcs 1.8 1.5 0.4 1 1.9 1.6 0.5 0.2 30 Ta=25℃ IF=10mA n=30pcs 840 FORWARD OPERATING RESISTANCE:rf(Ω) 0.1 10 20 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 850 Ta=25℃ VR=0V 10 REVERSE CURRENT:IR(nA) 20 30 40 50 60 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS CAPACITANCE BETWEEN TERMINALS:Ct(pF) FORWARD OPERATING RESISTANCE:rf(Ω) f=1MHz 1.3 1.2 AVE:0.364pF 1.1 AVE:1.206Ω 1 Ct DISPERSION MAP FORWARD CURRENT:IF(mA) rf DISPERSION MAP 5 Ta=25℃ f=100MHz IF=10mA n=10pcs 0.8 0.7 0.6 0.5 0.4 0.3 0.2 AVE:0.639Ω 0 ELECTROSTATIC DISCHARGE TEST ESD(KV) 1 0.9 0.1 10 1 100 1 0.1 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 FORWARD OPERATING RESISTANCE:rf(Ω) CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=150℃ 10 REVERSE CURRENT:IR(nA) FORWARD CURRENT:IF(mA) f=1MHz 4 2 AVE:0.71kV 1 0 FORWARD CURRENT:IF(mA) rf DISPERSION MAP AVE:2.01kV 3 C=200pF R=0Ω C=100pF R=1.5kΩ ESD DISPERSION MAP Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1