Information on New Products from Cole Hersee 200 Amp Solenoids with Silver Contacts High Amp Rating; High Performance Improved contacts for best conductivity Universal use – for loads up to 200A Environmentally-sealed options Improved silver-tungsten contacts provide best conductivity, and are more weld-resistant than standard silver contacts. Minimizes arcing and contact oxidation, maintains high performance. Universal use — for loads up to 200A. More environmentally-sealed options available. Encapsulated solenoids (24213-01 & 24213-03) withstand moisture and dust to IP66. Where vehicle vibration is a problem, we recommend the 24213-01 in which the internal windings are potted for added protection of coil leads and studs. Features & Benefits 24214 Standard service. 24V continuous duty, insulated 24213 Standard service. 12V continuous duty, insulated 24213-01 12V continuous duty, insulated. Pressure wash resistant to IP66. Vibration resistant potted coil and epoxy-coated exterior. 24213-03 12V continuous duty, insulated. Pressure wash resistant to IP66. Corrosion resistant. PVC-coated exterior. 24213-05 12V continuous duty, insulated. Severe service. Pressure wash resistant to IP66. Corrosion resistant. Vibration resistant. Potted coil and epoxy-coated exterior. Mechanical Specifications SPST Normally open contacts. Plated steel housing. Hexnuts and washers included. Large (power circuit) battery studs; copper 5/16” -24 thread. Small (control circuit) coil studs; steel 10-32 thread. Bracket mounting holes 5/16 X 19/32” (7.9 X 15.1mm) on 2 13/64” centers (56.0mm). Caution: Never unscrew the inner hexnuts on the studs. These keep the stud and inner wiring in place. Littelfuse Commercial Vehicle Products D-625 Rev A 200A Solenoid Relay Specifications Environmental Specifications Characteristic Parameter Notes Operating temperature range - 40º to + 85ºC (- 40º to + 185ºF) Ingress protection 24213 Not rated 24214 Not rated 24213-01 IP66 Per IEC 529 24213-03 IP66 Per IEC 529 24213-05 IP66 Per IEC 529 Vibration Per SAE J1455 Shock Per SAE J1455 Terminal Torque Specifications Screw Thread Torque Battery studs 5/16 - 24 35 in-lbs max (4.0 Nm) Coil studs 10 - 32 15 in-lbs max (1.7 Nm) Electrical Characteristics Characteristic Min. Max. Notes 24212-xx 9V 16V Coil resistance 17.5 Ohms 24144 18V 32V Coil resistance 71.0 Ohms Continuous current 200A Make and break In rush current 750A On make only Operating voltage More Cole Hersee Brand Solenoid Relay Options Insulated Grounded 24063 24V 85A Continuous 24124 24V 85A Continuous 24059 12V 85A Continuous 24106 12V 85A Continuous 24008 24V Intermittent 24037 12V 85A Intermittent 750A inrush, 100A break 24047 12V Intermittent, 750A inrush, 100A break 24071 12V Intermittent, 750A inrush, 100A break 24063-08 24V 85A Continuous 24117 12V 85A Continuous 24076 12V Intermittent, 750A inrush, 100A break Littelfuse Commercial Vehicle Products • 20 Old Colony Avenue, Boston, MA USA 02127-2467 210. 621.1845 • www.colehersee.com • www.littelfuse.com