DCSDW01 SERIES Up to 1.08 Watts DC/DC Converter Single and Dual Output Rev A DIP Package (Standard) SMT Package (Suffix “S”) Size: 0.52in x 0.36in x 0.40in Size: 0.56in x 0.36in x 0.40in OPTIONS FEATURES • Package Type -Surface Mount -Through Hole • Output Quantity • Isolation -1600VDC -3000VDC • Ultra Small SMT and DIP Package • SMT Package Qualifies for Lead-Free Reflow Solder Process According to IPC J-STD-020D • No Minimum Load Required • 1600VDC Input to Output Isolation or Optional 3000VDC • Remote Control APPLICATIONS • • • • • • • • • • • 4:1 Ultra Wide Input Range Up to 1.08 Watts of Output Power RoHS II & REACH Compliant CE Marked Continuous Short Circuit Protection UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals DESCRIPTION Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment The DCSDW01 series of DC DC converters offers up to 1.08 watts of output power in a compact package. This series consists of single and dual output models with 4:1 ultra wide input range. Each model in this series has a no minimum load requirement and offers continuous short circuit protection. The DCSDW01 series has UL60950-1, EN60950-1, & IEC60950-1 safety approvals. Either surface mount or through hole package types are available as well as a 1600VDC input to output isolation or a 3000VDC optional isolation. Please call factory for order details. MODEL SELECTION TABLE Single Output Models Model Number(1) DCSDW01-12S33 DCSDW01-12S05 DCSDW01-12S12 DCSDW01-12S15 DCSDW01-12S24 DCSDW01-24S33 DCSDW01-24S05 DCSDW01-24S12 DCSDW01-24S15 DCSDW01-24S24 DCSDW01-48S33 DCSDW01-48S05 DCSDW01-48S12 DCSDW01-48S15 DCSDW01-48S24 Input Voltage Range 12VDC (4.5~18) 24VDC (9~36) 48VDC (18~75) Output Voltage 3.3VDC 5VDC 12VDC 15VDC 24VDC 3.3VDC 5VDC 12VDC 15VDC 24VDC 3.3VDC 5VDC 12VDC 15VDC 24VDC Output Current @Full Load 300mA 200mA 90mA 70mA 45mA 300mA 200mA 90mA 70mA 45mA 300mA 200mA 90mA 70mA 45mA No Load Input Current 15mA 20mA 20mA 20mA 25mA 10mA 10mA 10mA 10mA 10mA 5mA 5mA 5mA 6mA 6mA Maximum Capacitor Load 1680µF 820µF 470µF 330µF 160µF 1680µF 820µF 470µF 330µF 160µF 1680µF 820µF 470µF 330µF 160µF Efficiency Output Power 77% 79% 81% 81% 80% 76% 78% 81% 81% 80% 75% 78% 81% 81% 80% Ripple and Noise Up to 1.08W 30mVp-p Up to 1.08W 30mVp-p Up to 1.08W 30mVp-p MODEL SELECTION TABLE Dual Output Models Model Number(1) DCSDW01-12D05 DCSDW01-12D12 DCSDW01-12D15 DCSDW01-24D05 DCSDW01-24D12 DCSDW01-24D15 DCSDW01-48D05 DCSDW01-48D12 DCSDW01-48D15 5/9/2016 Input Voltage Range 12VDC (4.5~18) 24VDC (9~36) 48VDC (18~75) Output Voltage ±5VDC ±12VDC ±15VDC ±5VDC ±12VDC ±15VDC ±5VDC ±12VDC ±15VDC Output Current @Full Load ±100mA ±45mA ±35mA ±100mA ±45mA ±35mA ±100mA ±45mA ±35mA No Load Input Current 25mA 25mA 25mA 10mA 10mA 10mA 6mA 6mA 6mA Maximum Capacitive Load ±470µF ±330µF ±220µF ±470µF ±330µF ±220µF ±470µF ±330µF ±220µF Efficiency Output Power 77% 80% 81% 77% 80% 81% 77% 80% 81% Ripple and Noise Up to 1.08W 30mVp-p Up to 1.08W 30mVp-p Up to 1.08W 30mVp-p Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 6 DCSDW01 SERIES Up to 1.08 Watts DC/DC Converter Single and Dual Output Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max 4.5 9 18 12 24 48 18 36 75 25 50 100 Unit INPUT SPECIFICATIONS Input Voltage Range 12Vin(nominal) 24Vin(nominal) 48Vin(nominal) Input Surge Voltage 1 second, max. Input Reflected Ripple Current(2) 12Vin(nominal) 24Vin(nominal) 48Vin(nominal) Input Filter OUTPUT SPECIFICATIONS Output Voltage Voltage Accuracy Line Regulation Load Regulation 10% Load to 90% Load Start-Up Time -1.0 -0.2 -1.0 -1.0 -0.5 -0.8 -5.0 25% load step change Temperature Coefficient REMOTE ON/OFF CONTROL CTRL pin applied current via 1kΩ Single Dual Single Dual Asymmetrical Load 25%/100% FL; Dual Constant Resistive Load Power Up Remote ON/OFF -0.02 DC-DC ON DC-DC OFF Remote Off Input Current VDC 15 10 5 Capacitor Low Line to High Line at Full Load No Load to Full Load Output Power Output Current Maximum Capacitive Load Cross Regulation Ripple & Noise (20MHz bandwidth) Transient Response Recovery Time 12Vin(nominal) 24Vin(nominal) 48Vin(nominal) VDC mAp-p See Table +1.0 +0.2 +1.0 +1.0 +0.5 +0.8 1.08 See Table See Table +5.0 30 500 5 10 5 10 +0.02 % % % W % mVp-p µs ms %/ºC Open or High Impedance 2.0 3.0 4.0 2.5 mA mA DC-DC ON Application Circuit DC-DC OFF PROTECTION Short Circuit Protection ENVIRONMENTAL SPECIFICATIONS Operating Case Temperature Storage Temperature Thermal Shock Vibration Relative Humidity Lead-Free Reflow Solder Process Moisture Sensitivity (MSL) MTBF 5/9/2016 Continuous, Automatic Recovery Without Derating Derating -40 +90 -55 5 MIL-HDBK-217F, Full Load +90 +105 +125 MIL-STD-810F MIL-STD-810F 95 IPC J-STD-020D IPC J-STD-033B Level 2 8,401,000 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] ºC ºC % RH Hours Page 2 of 6 DCSDW01 SERIES Up to 1.08 Watts DC/DC Converter Single and Dual Output Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min GENERAL SPECIFICATIONS Efficiency Typ Max Unit See Table Switching Frequency 100 Isolation Voltage 1 minute Isolation Resistance 500VDC Standard Suffix “H” Isolation Capacitance Standard Suffix “H” kHz 1600 3000 1 VDC GΩ 50 50 PHYSICAL SPECIFICATIONS Weight pF 0.10oz (2.7g) 0.52in x 0.36in x 0.40in (14.2mm x 9.1mm x 10.2mm) 0.56in x 0.36in x 0.40in (14.2mm x 9.1mm x 10.2mm) Non-Conductive Black Plastic Non-Conductive Black Plastic Silicone (UL94 V-0) Through Hole Models (Standard) Dimensions (L x W x H) Surface Mount Models (“S” Suffix) Case Material Base Material Potting Material SAFETY CHARACTERISTICS UL60950-1 EN60950-1 IEC60950-1 Safety Approvals EMI(2) EN55022 ESD EN61000-4-2 Radiated Immunity Fast Transient(3) Surge(3) Conducted Immunity Power Frequency Magnetic Field EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 Class A Class B Air ±8kV Contact ±6kV 10 V/m ±2kV ±1kV 10 Vr.m.s. 100A/m continuous; 1000A/m 1 second Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A NOTES 1. 2. 3. “S” added at the end of the model number represents SMT (surface mount) package type. The standard module meets EMI Class A or Class B and input reflected current with external components. Please contact factory for more information. An external input filter capacitor is required if the module will meet EN61000-4-4, EN61000-4-5. Suggested filter capacitor: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. *Due to advances in technology, specifications are subject to change without notice. 5/9/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 6 DCSDW01 SERIES Up to 1.08 Watts DC/DC Converter Single and Dual Output Rev A DERATING CURVES DCSDW01-48S05 Derating Curve EFFICIENCY GRAPHS DCSDW01-48S05 Efficiency vs. Input Voltage 5/9/2016 DCSDW01-48S05 Efficiency vs. Output Current Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 6 DCSDW01 SERIES Up to 1.08 Watts DC/DC Converter Single and Dual Output Rev A MECHANICAL DRAWINGS DCSDW01 DIP Through Hole Models PIN 1 2 4 5 6 7 Notes 1. 2. 3. 4. PIN CONNECTION SINGLE DUAL +Vin +Vin -Vin -Vin Ctrl Ctrl NC -Vout -Vout Common +Vout +Vout All dimensions in inch (mm) Tolerance: x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) Pin pitch tolerance ±0.01 (0.25) Pin Pitch dimensions tolerance ±0.004(0.1) DCSDW01(S) SMT Surface Mount Models 5/9/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 5 of 6 DCSDW01 SERIES Up to 1.08 Watts DC/DC Converter Single and Dual Output Rev A MODEL NUMBER SETUP DCSDW 01 Series Name Output Power - 48 Input Voltage 05: 4.5~9VDC S 05 Output Quantity Ouptut Voltage S: Single 33: 3.3VDC 12: 9~18VDC 05: 5VDC 24: 18~36VDC 12: 12VDC 48: 36~75VDC 15: 15VDC S H Assembly Option Isolation Option None: DIP Type None: Standard: 1600VDC Isolation S: SMT Type H: 3000VDC Isolation 24: 24VDC D: Dual 05: ±5VDC 12: ±12VDC 15: ±15VDC COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 5/9/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 6 of 6