LAN E SERIES 1-2 Watts DC/DC Power Converters Single and Dual Outputs Rev E OPTIONS • • • • • Output Voltage Input Voltage 2KV I/O Isolation Wattage Package Size FEATURES • 3.3, 5, 12, 15, 24, and 48VDC Nominal Input Voltages • 1 Watt and 2 Watt Output Power Models Available • RoHS Compliant • UL 94V-0 Potting Material • Non-Regulated Single and Dual Outputs • UL60950-1 Safety Approval • • • • • • • Two Package Sizes Available No External Components Required 7-Pin SIP Package High Efficiency up to 85% Internal SMD Construction Industry Standard Pinout 1KVDC I/O Isolation (Standard), 2KV I/O Isolation Available (Suffix “2KV”) DESCRIPTION When board space is at a premium and voltage conversions require low power, the LAN E series miniature converters offer superior solutions at an economical price. A multitude of options and operating ranges allow you to custom-tailor these converters to application requirements. Populating 0.179 or 0.516 square inches of board space, the LAN E series provides up to 2 Watts of power while maintaining specifications over the entire industrial operating temperature range. MODEL SELECTION TABLE Single Output Models Model Number LANE3.333N LANE3.305N LANE3.309N LANE3.312N LANE3.315N LANE3.324N LANE533N LANE505N LANE509N LANE512N LANE515N LANE524N LANE933N LANE905N LANE909N LANE912N LANE915N LANE924N LANE1233N LANE1205N LANE1209N LANE1212N LANE1215N LANE1224N LANE1533N LANE1505N LANE1509N LANE1512N LANE1515N LANE1524N LANE2433N LANE2405N LANE2409N LANE2412N LANE2415N LANE2424N LANE4833N LANE4805N LANE4809N LANE4812N LANE4815N LANE4824N 5/9/2016 Input Voltage Range 3.3VDC (2.97~3.63VDC) 5VDC (4.5~5.5VDC) 9VDC (8.1~9.9VDC) 12VDC (10.8~13.2VDC) 15VDC (13.5~16.5VDC) 24VDC (21.6~26.4VDC) 48VDC (43.2~52.8VDC) Output Voltage 3.3VDC 5VDC 9VDC 12VDC 15VDC 24VDC 3.3VDC 5VDC 9VDC 12VDC 15VDC 24VDC 3.3VDC 5VDC 9VDC 12VDC 15VDC 24VDC 3.3VDC 5VDC 9VDC 12VDC 15VDC 24VDC 3.3VDC 5VDC 9VDC 12VDC 15VDC 24VDC 3.3VDC 5VDC 9VDC 12VDC 15VDC 24VDC 3.3VDC 5VDC 9VDC 12VDC 15VDC 24VDC Output Current 1 Watt Models 2 Watt Models(3) 303mA 606mA 200mA 400mA 112mA 224mA 84mA 167mA 67mA 132mA 42mA 84mA 303mA 606mA 200mA 400mA 112mA 224mA 84mA 167mA 67mA 132mA 42mA 84mA 303mA 606mA 200mA 400mA 112mA 224mA 84mA 167mA 67mA 132mA 42mA 84mA 303mA 606mA 200mA 400mA 112mA 224mA 84mA 167mA 67mA 132mA 42mA 84mA 303mA 606mA 200mA 400mA 112mA 224mA 84mA 167mA 67mA 132mA 42mA 84mA 303mA 606mA 200mA 400mA 112mA 224mA 84mA 167mA 67mA 132mA 42mA 84mA 112mA 200mA 112mA 84mA 67mA 42mA - Ripple & Noise 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Efficiency 70% 70% 75% 78% 80% 82% 70% 70% 75% 78% 80% 82% 70% 70% 75% 78% 80% 82% 70% 70% 75% 78% 80% 82% 70% 70% 75% 78% 80% 82% 70% 70% 75% 78% 80% 82% 70% 70% 75% 78% 80% 82% Page 1 of 5 LAN E SERIES 1-2 Watts DC/DC Power Converters Single and Dual Outputs Rev E MODEL SELECTION TABLE Dual Output Models Model Number Input Voltage Range LANE3.305ND LANE3.309ND LANE3.312ND LANE3.315ND LANE505ND LANE509ND LANE512ND LANE515ND LANE515ND1.2 LANE1205ND LANE1209ND LANE1212ND LANE1215ND LANE1505ND LANE1509ND LANE1512ND LANE1515ND LANE2405ND LANE2409ND LANE2412ND LANE2415ND LANE4805ND LANE4809ND LANE4812ND LANE4815ND Output Voltage 3.3VDC (2.97~3.63VDC) 5VDC (4.5~5.5VDC) 12VDC (10.8~13.2VDC) 15VDC (13.5~16.5VDC) 24VDC (21.6~26.4VDC) 48VDC (43.2~52.8VDC) ±5VDC ±9VDC ±12VDC ±15VDC ±5VDC ±9VDC ±12VDC ±15VDC ±15VDC ±5VDC ±9VDC ±12VDC ±15VDC ±5VDC ±9VDC ±12VDC ±15VDC ±5VDC ±9VDC ±12VDC ±15VDC ±5VDC ±9VDC ±12VDC ±15VDC Output Current 1 Watt Models 2 Watt Models(3) ±100mA ±200mA ±56mA ±111mA ±42mA ±83mA ±34mA ±67mA ±100mA ±200mA ±56mA ±111mA ±42mA ±83mA ±34mA ±67mA ±40mA ±100mA ±200mA ±56mA ±111mA ±42mA ±83mA ±34mA ±67mA ±100mA ±200mA ±56mA ±111mA ±42mA ±83mA ±34mA ±67mA ±100mA ±200mA ±56mA ±111mA ±42mA ±83mA ±34mA ±67mA ±100mA ±200mA ±56mA ±111mA ±42mA ±83mA ±34mA ±67mA Ripple & Noise Efficiency 70% 75% 75% 75% 70% 75% 75% 75% 75% 70% 75% 75% 75% 70% 75% 75% 75% 70% 75% 75% 75% 70% 75% 75% 75% 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max 2.97 4.5 8.1 10.8 13.5 21.6 43.2 3.3 3.63 5 5.5 9 9.9 12 13.2 15 16.5 24 26.4 48 52.8 Capacitor Unit INPUT SPECIFICATIONS 3.3VDC 5VDC 9VDC 12VDC 15VDC 24VDC 48VDC(1) Input Voltage Range Input Filter OUTPUT SPECIFICATIONS Output Voltage Voltage Tolerance Line Regulation Vo, Io Nominal For 1% of Vin Load Regulation 10% to 100% Full Load Output Power Standard models Suffix “2” models Output Current Ripple & Noise (20MHz bandwidth) Transient Response Recovery Time PROTECTION Short Circuit Protection ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature Storage Temperature Humidity Cooling MTBF 5/9/2016 See Table ±5 1.2 15 10 1 2 See Table 100 350 3.3V & 5V output models 9V, 12V, 15V, 24V 50% load step change Short term 1 -40 -40 Non-Condensing MIL-HDBK-217F @25ºC +85 +100 95 Free Air Convection 3,500,000 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] VDC % % % W mVp-p µS Sec ºC ºC % Hours Page 2 of 5 LAN E SERIES 1-2 Watts DC/DC Power Converters Single and Dual Outputs Rev E SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min GENERAL SPECIFICATIONS Efficiency(2) Switching Frequency Max Unit See Table Full Load, Nominal Input Isolation Voltage Input to Output Isolation Resistance PHYSICAL SPECIFICATIONS 500VDC 100 Standard Models Suffix “2KV” models KHz 1000 2000 1000 Package 1 Package 2 Weight Typ VDC MΩ 0.074oz (2.1g) 0.095oz (2.7g) 0.77in x 0.24in x 0.39in (19.5mm x 6mm x 10mm) 0.77in x 0.28in x 0.39in (19.5mm x 7.1mm x 10mm) DAP Epoxy (UL 94V-0) Package 1 Dimensions (L x W x H) Package 2 Case Material Potting Material SAFETY & EMC CHARACTERISTICS Safety Approvals UL60950-1 NOTES (1) (2) (3) (4) (5) (6) 48VDC nominal input voltage models are only available in package 2 type. As the input voltage increases there will be an increase in efficiency. For 2 Watt models, add the suffix “2” to the model number (Ex: LANE1505N2) 2 Wat models are not available with 48V input. For 2KVDC I/O isolation add the suffix “2KV” to the model number (Ex. LANE1505N2KV) Dimensions of 3.3, 5, 9, 12, 15, and 24V input models are 0.77 x 0.24 x 0.36 inches (19.5 x 6 x 10mm). The dimensions of 48V input models and 2 Watt models are 0.77 x 0.30 x 0.39 inches (19.5 x 7.5 x 10mm) *Due to advances in technology, specifications are subject to change without notice. DERATING CURVES Temperature Derating Graph 5/9/2016 Tolerance Envelope Graph Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 5 LAN E SERIES 1-2 Watts DC/DC Power Converters Single and Dual Outputs Rev E RECOMMENDED TEST CIRCUITS Single Output Dual Outputs MECHANICAL DRAWINGS Markings and Dimensions PIN Single 1 +Vin 2 -Vin 5 -Vout 6 +Vout Packaging Size (mm) A 9.5 5/9/2016 B 16.5 C 522 D 5.0 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 5 Rev E LAN E SERIES 1-2 Watts DC/DC Power Converters Single and Dual Outputs FILTERING In some circuits, which are sensitive to noise and ripple, a filtering capacitor may be added to the DC/DC output end and input end to reduce the noise and ripple. However, the capacitance of the output filter must be appropriate. If the capacitance is too big, a startup problem may arise. To ensure safe and reliable operation, please refer to the capacitance table below for the maximum filter capacitor size for each output voltage. To get an extremely low ripple, an “LC” filtering network may be connected to the input and output ends of the DC/DC converter. It should also be noted that the inductance and the frequency of the “LC” filtering network should be staggered with the DC/DC frequency to avoid mutual interference (see figure 1 below. COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 5/9/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 5 of 5