AOS Semiconductor Product Reliability Report AO4446/AO4446L, rev A Plastic Encapsulated Device ALPHA & OMEGA Semiconductor, Inc 495 Mercury Drive Sunnyvale, CA 94085 U.S. Tel: (408) 830-9742 www.aosmd.com Aug 10, 2005 1 This AOS product reliability report summarizes the qualification result for AO4446. Accelerated environmental tests are performed on a specific sample size, and then followed by electrical test at end point. Review of final electrical test result confirms that AO4446 passes AOS quality and reliability requirements. The released product will be categorized by the process family and be monitored on a quarterly basis for continuously improving the product quality. Table of Contents: I. II. III. IV. V. Product Description Package and Die information Environmental Stress Test Summary and Result Reliability Evaluation Quality Assurance Information I. Product Description: The AO4446 uses advanced trench technology to provide excellent RDS(ON), low gate charge and low gate resistance. This device is ideally suited for use in PWM applications. Standard Product AO4446 is Pb-free (meets ROHS & Sony 259 specifications). AO4446L is a Green Product ordering option. AO4446 and AO4446L are electrically identical. Absolute Maximum Ratings TA=25°C unless otherwise noted Parameter Symbol Maximum Units Drain-Source Voltage VDS 30 V Gate-Source Voltage VGS ±20 V TA=25°C Continuous Drain G Current TA=70°C Pulsed Drain Current C TA=25°C B Power Dissipation Junction and Storage Temperature Range 15 ID 12 IDM 40 3 PD TA=70°C Thermal Characteristics Parameter Maximum Junction-toAmbient Maximum Junction-toAmbient Maximum Junction-to-Lead A W 2.1 TJ , TSTG -55 to 150 Symbol T = 10s SteadyState SteadyState RθJA RθJL °C Typ Max Units 33 40 °C/W 59 75 °C/W 16 24 °C/W 2 II. Die / Package Information: Process Package Type Lead Frame Die Attach Bond wire Mold Material Filler % (Spherical/Flake) Flammability Rating Backside Metallization Moisture Level AO4446 Standard sub-micron low voltage N channel process 8 leads SOIC Copper with Ag Plate Ag epoxy Au 2mils Epoxy resin with silica filler 90/10 UL-94 V-0 Ti / Ni / Ag Up to Level 1 * AO4446L (Green Compound) Standard sub-micron low voltage N channel process 8 leads SOIC Copper with Ag Plate Ag epoxy Au 2 mils Epoxy resin with silica filler 100/0 UL-94 V-0 Ti / Ni / Ag Up to Level 1* Note * based on info provided by assembler and mold compound supplier III. Result of Reliability Stress for AO4446 (Standard) & AO4446L (Green) Test Item Test Condition Time Point Lot Attribution Total Sample size Solder Reflow Precondition HTGB Normal: 1hr PCT+3 cycle IR reflow@240? (260? for Green) Temp = 150 C, Vgs=100% of Vgsmax 0hr Normal: 81 lots Green: 23 lots 14410 pcs 168 / 500 hrs Normal: 4 lots (Note A*) 1000 hrs HTRB Temp = 150 C, Vds=80% of Vdsmax 168 / 500 hrs Normal: 4 lots Pressure Pot Temperature Cycle 130 +/- 2 C, 85%, 33.3 psi, Vgs = 80% of Vgs max 121 C, 15+/-1 PSIG, RH=100% -65 to 150 deg C, air to air, 0.5hr per cycle 100 hrs 96 hrs 250 / 500 cycles 0 77+5 pcs / lot 328 pcs 0 (Note A*) 77+5 pcs / lot Normal: 52 lots Green: 16 lots 3740 pcs 0 50+5 pcs / lot 4950 pcs 0 50+5 pcs / lot 5720 pcs 0 1000 hrs HAST 328 pcs Number of Failures 0 (Note B**) Normal: 70 lots Green: 20 lots (Note B**) Normal: 81 lots Green: 23 lots (Note B**) 50+5 pcs / lot 3 III. Result of Reliability Stress for AO4446 (Standard) & AO4446L (Green) Continues DPA Internal Vision Cross-section X-ray CSAM NA 5 5 5 5 5 5 0 NA 5 5 0 Bond Integrity Room Temp 150° C bake 150° C bake 0hr 250hr 500hr 40 40 40 40 wires 40 wires 40 wires 0 Solderability 230° C 5 sec 15 15 leads 0 Die shear 150°C 0hr 10 10 0 Note A: The HTGB and HTRB reliability data presents total of available AO4446 and AO4446L burn-in data up to the published date. Note B: The pressure pot, temperature cycle and HAST reliability data for AO4446L comes from the AOS generic green compound package qualification data. IV. Reliability Evaluation FIT rate (per billion): 9 MTTF = 12684 years 500 hrs of HTGB, 150 deg C accelerated stress testing is equivalent to 15 years of lifetime at 55 deg C operating conditions (by applying the Arrhenius equation with an activation energy of 0.7eV and 60% of upper confidence level on the failure rate calculation). AOS reliability group also routinely monitors the product reliability up to 1000 hr at and performs the necessary failure analysis on the units failed for reliability test(s). The presentation of FIT rate for the individual product reliability is restricted by the actual burn-in sample size of the selected product (AO4446). Failure Rate Determination is based on JEDEC Standard JESD 85. FIT means one failure per billion hours. 2 9 Failure Rate = Chi x 10 / [2 (N) (H) (Af)] 9 = 1.83 x 10 / [2 (3×164) (500) (258) +2 (164) (1000) (258)] = 9 9 8 MTTF = 10 / FIT = 1.11x 10 hrs = 12684 years Chi² = Chi Squared Distribution, determined by the number of failures and confidence interval N = Total Number of units from HTRB and HTGB tests H = Duration of HTRB/HTGB testing Af = Acceleration Factor from Test to Use Conditions (Ea = 0.7eV and Tuse = 55C) Acceleration Factor [Af] = Exp [Ea / k (1/Tj u – 1/Tj s )] Acceleration Factor ratio list: Af 55 deg C 70 deg C 85 deg C 100 deg C 115 deg C 130 deg C 150 deg C 258 87 32 13 5.64 2.59 1 Tj s = Stressed junction temperature in degree (Kelvin), K = C+273.16 Tj u =The use junction temperature in degree (Kelvin), K = C+273.16 k = Boltznan’s constant, 8.617164 X 10 E-5V / K 4 V. Quality Assurance Information Acceptable Quality Level for outgoing inspection: 0.1% for electrical and visual. Guaranteed Outgoing Defect Rate: < 25 ppm Quality Sample Plan: conform to Mil-Std-105D 5