SU SERIES 1 Watt DC/DC Converter Single Output Rev C FEATURES • • • • • • APPLICATIONS • • • • • • • • • Output Current up to 303mA Internal Input & Output Filter UL94-V0 Non-Conductive Case 1 Watt Unregulated Output Power 4 Pin Single-In-Line Package (SIP) Input/Output Isolation up to 1000VDC High Efficiency for Low Power Application ISO9001 Certified Manufacturing Facilities Compliant to RoHS II & REACH Design meets UL60950-1, EN60950-1, & IEC60950-1 • CE Marked • Multiple Input Voltage Ranges DESCRIPTION Wireless Network Telecom/Datacom Industry Control System Measurement Semiconductor Equipment Size: 0.45in x 0.24in x 0.40in (11.5mm x 6.0mm x 10.2mm) Wall’s SU series offers 1 watt of output power in a four pin SIP (single inline) package. This series consists of single output models ranging from 3.3VDC to 15VDC and multiple input voltages ranging from 3.3VDC to 24VDC. Models are RoHS compliant and CE Marked, and have UL60950-1, EN60950-1, & IEC60950-1 safety approvals. These units are ideal for low power applications and are highly efficient. The UL94V-0 plastic case is non-conductive and includes both internal input and output filters. MODEL SELECTION TABLE Model Number SU33S33 SU33S05 SU33S09 SU33S12 SU33S15 SU05S33 SU05S05 SU05S09 SU05S12 SU05S15 SU09S09 SU12S33 SU12S05 SU12S09 SU12S12 SU12S15 SU15S33 SU15S05 SU15S09 SU15S12 SU15S15 SU24S33 SU24S05 SU24S09 SU24S12 SU24S15 5/6/2016 Input Voltage Range 3.3VDC (3.0-3.6VDC) 5VDC (4.5-5.5VDC) 9VDC (8.1~9.9VDC) 12VDC (10.8-13.2VDC) 15VDC (13.5-16.5VDC) 24VDC (21.6-26.4VDC) Output Voltage 3.3VDC 5VDC 9VDC 12VDC 15VDC 3.3VDC 5VDC 9VDC 12VDC 15VDC Output Current Min Load Max Load 30.3mA 303mA 20mA 200mA 11.1mA 111mA 8.4mA 84mA 6.6mA 66mA 30.3mA 303mA 20mA 200mA 11.1mA 111mA 8.4mA 84mA 6.6mA 66mA 9VDC 11.1mA 111mA 3.3VDC 5VDC 9VDC 12VDC 15VDC 3.3VDC 5VDC 9VDC 12VDC 15VDC 3.3VDC 5VDC 9VDC 12VDC 15VDC 30.3mA 20mA 11.1mA 8.4mA 6.6mA 30.3mA 20mA 11.1mA 8.4mA 6.6mA 30.3mA 20mA 11.1mA 8.4mA 6.6mA 303mA 200mA 111mA 84mA 66mA 303mA 200mA 111mA 84mA 66mA 303mA 200mA 111mA 84mA 66mA Ripple & Noise(1) 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p No Load Input Current(2) 42mA 38mA 45mA 45mA 45mA 25mA 25mA 25mA 25mA 24mA 20mA 14mA 10mA 13mA 14mA 13mA 9mA 9mA 9mA 8mA 9mA 6mA 6mA 6mA 5mA 6mA Output Power 1W 1W 1W 1W 1W 1W Maximum Capacitive Load(3) Efficiency 150µF 100µF 22µF 47µF 33µF 150µF 100µF 22µF 47µF 33µF 68% 70% 71% 72% 75% 68% 70% 74% 78% 80% 22µF 74% 150µF 100µF 22µF 47µF 33µF 150µF 100µF 22µF 47µF 33µF 150µF 100µF 22µF 47µF 33µF 68% 70% 74% 78% 80% 68% 70% 74% 78% 80% 70% 70% 74% 78% 80% Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 4 SU SERIES 1 Watt DC/DC Converter Single Output Rev C SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max 3.0 4.5 8.1 10.8 13.5 21.6 3.3 3.6 5 5.5 9 9.9 12 13.2 15 16.5 24 26.4 Capacitor Unit INPUT SPECIFICATIONS 3.3V Nominal Input 5V Nominal Input 9V Nominal Input 12V Nominal Input 15V Nominal Input 24V Nominal Input Input Voltage Range Input Filter OUTPUT SPECIFICATIONS Output Voltage Voltage Accuracy -5.0 Line Regulation Low Line to High Line at Full Load Load Regulation 10% to 100% Load Output Power Output Current Maximum Capacitive Load Ripple & Noise Temperature Coefficient PROTECTION Short Circuit Protection ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature Storage Temperature Relative Humidity Thermal Shock Vibration MTBF GENERAL SPECIFICATIONS Efficiency Switching Frequency Isolation Voltage (1 minute) Isolation Resistance Isolation Capacitance PHYSICAL SPECIFICATIONS Weight 3.3V, 5V models All Others 3.3V, 5V models All Others -15 -10 Measured by 20MHz bandwidth -0.1 See Table +5.0 1 1.3 1 1.2 +15 +10 See Table See Table See Table 100 +0.1 VDC % % of Vin % mVp-p %/ºC 1 Without Derating -40 -55 5 MIL-HDBK-217F, Full Load +85 +125 95 MIL-STD-810F MIL-STD-810F 985,000 Sec. ºC ºC % RH hours See Table 90 Input to Output 500VDC KHz VDC GΩ pF 1000 1 80 0.053oz (1.5g) 0.45in x 0.24in x 0.40in (11.5mm x 6.0mm x 10.2mm) Non-Conductive Black Plastic Epoxy (UL94 V-0) Dimensions (L x W x H) Case Material Potting Material SAFETY IEC60950-1 UL60950-1 EN60950-1 Safety Approvals *Due to advances in technology, specifications subject to change without notice. NOTES (1) (2) (3) Typical Value at Nominal Input Voltage and Full Load Typical Value at Nominal Input Voltage and No Load Test by minimum Vin and constant resistive load. The output requires a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. CAUTION: This power module is not internally fused. An input line fuse must always be used. 5/6/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 SU SERIES 1 Watt DC/DC Converter Single Output Rev C DERATING CURVES SU24S12 Derating Curve EFFICIENCY GRAPHS SU24S12 Efficiency vs Input Voltage 5/6/2016 SU24S12 Efficiency vs Output Load Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 SU SERIES 1 Watt DC/DC Converter Single Output Rev C MECHANICAL DRAWINGS PIN CONNECTION PIN SINGLE 1 -Vin 2 +Vin 3 -Vout 4 +Vout 1. 2. Notes: Tolerance: X.XX±0.02 (X.X±0.5) X.XX±.0.01 (X.XX±0.25) Pin Pitch Tolerance ±0.01 (0.25) COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 5/6/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4