DCLSR01 SERIES Up to 15 Watts DC/DC Converter Single Output Rev A FEATURES • • • • • • • • No Minimum Load Required Non-Isolation Low Standby Power Up to 15 Watts of Output Power APPLICATIONS • • • • • • High Efficiency Up to 96% 3.0~5.5VDC & 4.6~36VDC Wide Input Range Short Circuit, Over Load, and Over Temperature Protection UL60950-1, EN60950-1, IEC60950-1 Safety Approvals DESCRIPTION Wireless Network Telecom/Datacom Industry Control System Distributed Power Architectures Semiconductor Equipment Microprocessor Power Application The DCLSR01 series of DC/DC converters offers up to 15 watts of output power in a compact 0.60” x 0.37” x 0.29” package. This series consists of single output models with wide input ranges of 3.0~5.5VDC & 4.6~36VDC. This series offers high efficiency up to 96% and short circuit, over load, and over temperature protection. The DCLSR01 series also offers UL60950-1, EN60950-1, and IEC60950-1 safety approvals. Size: 0.60in x 0.37in x 0.29in MODEL SELECTION TABLE Model Number DCLSR01-05S1P2 DCLSR01-05S1P5 DCLSR01-05S1P8 DCLSR01-05S2P5 DCLSR01-12S1P2 DCLSR01-12S1P5 DCLSR01-12S1P8 DCLSR01-12S2P5 DCLSR01-12S3P3 DCLSR01-12S05 DCLSR01-12S6P5 DCLSR01-24S09 DCLSR01-24S12 DCLSR01-24S15 5/12/2016 Input Voltage Range 5.0VDC (3.0~5.5VDC) 5.0VDC (3.0~5.5VDC) 5.0VDC (3.0~5.5VDC) 5.0VDC (3.8~5.5VDC) 12VDC (4.6~36VDC) 12VDC (4.6~36VDC) 12VDC (4.6~36VDC) 12VDC (4.6~36VDC) 12VDC (4.75~36VDC) 12VDC (6.5~36VDC) 12VDC (9.0~36VDC) 24VDC (12~36VDC) 24VDC (15~36VDC) 24VDC (18~36VDC) Efficiency Output Voltage Output Current @Full Load Ripple & Noise Min. Vin Max.Vin 1.2VDC 1A 50mVp-p 90.5% 90.0% 1.5VDC 1A 50mVp-p 92.0% 91.5% 1.8VDC 1A 50mVp-p 92.5% 92.0% 2.5VDC 1A 50mVp-p 94.5% 94.0% 1.2VDC 1A 50mVp-p 74% 62% 1.5VDC 1A 50mVp-p 79% 67% 1.8VDC 1A 50mVp-p 82% 70% 2.5VDC 1A 50mVp-p 87% 75% 3.3VDC 1A 50mVp-p 91% 80% 5.0VDC 1A 50mVp-p 94% 84% 6.5VDC 1A 50mVp-p 94% 86% 9.0VDC 1A 75mVp-p 95% 90% 12VDC 1A 75mVp-p 95% 92% 15VDC 1A 75mVp-p 96% 94% Output Power Up to 15W Maximum No Load Input Capacitive Load Current 470µF Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] 1mA Page 1 of 5 DCLSR01 SERIES Up to 15 Watts DC/DC Converter Single Output Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Operating Input Voltage Range(1) Input Filter OUTPUT SPECIFICATIONS Output Voltage Voltage Accuracy Line Regulation Load Regulation Output Power Output Current Maximum Capacitive Load Ripple & Noise (20MHz bandwidth) Start-Up Time Temperature Coefficient PROTECTION Short Circuit Protection DCLSR01-05S1P2 DCLSR01-05S1P5 DCLSR01-05S1P8 DCLSR01-05S2P5 DCLSR01-12S1P2 DCLSR01-12S1P5 DCLSR01-12S1P8 DCLSR01-12S2P5 DCLSR01-12S3P3 DCLSR01-12S05 DCLSR01-12S6P5 DCLSR01-24S09 DCLSR01-24S12 DCLSR01-24S15 3.0 3.0 3.0 3.8 4.6 4.6 4.6 4.6 4.75 6.5 9.0 12 15 18 Low Line to High Line at Full Load No Load to Full Load 10% to 90% of Full Load -2.0 -0.2 -0.6 -0.3 Output Voltage ≤8V Output Voltage >8V Constant Resistive Load, Power Up -0.015 Over Load Protection % of Iout, Continuous mode Dynamic Load Response 50% Load Step Change -40 -55 See Table +2.0 +0.2 +0.6 +0.3 15 See Table See Table 50 75 5 +0.015 % % % W mVp-p mS %/ºC +100 +125 +105 95 MIL-STD-810F MIL-STD-810F 5 ºC ºC ºC %RH 12,260,000 hours See Table 1200 500 kHz 0.06oz (1.7g) 0.60in x 0.37in x 0.29in (15.2mm x 9.3mm x 7.3mm) Non-Conductive Black Plastic Non-Conductive Black Plastic Dimensions (L x W x H) Case Material Base Material SAFETY 5/12/2016 VDC Continuous, Automatic Recovery 4.8 A 2.5 200 mV 250 µs +150 ºC DCLSR01-05Sxx Others Peak Deviation Recovery Time Over Temperature Protection Internal IC Junction ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature Storage Temperature Maximum Case Temperature Relative Humidity Thermal Shock Vibration MTBF MIL-HDBK-217F Full Load GENERAL SPECIFICATIONS Efficiency DCLSR01-05Sxx Switching Frequency Others PHYSICAL SPECIFICATIONS Weight Safety Approvals 5.0 5.5 5.0 5.5 5.0 5.5 5.0 5.5 12 36 12 36 12 36 12 36 12 36 12 36 12 36 24 36 24 36 24 36 Capacitor Type UL60950-1 EN60950-1 IEC60950-1 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 5 DCLSR01 SERIES Up to 15 Watts DC/DC Converter Single Output Rev A NOTES (1) With a C1 (22uF/50V) input capacitor for input voltage > 32VDC, the input allows 36VDC, max. CAUTION: The power module is not internally fused. An input line fuse must always be used. Due to advances in technology, specifications subject to change without notice. DERATING CURVES DCLSR01-12S05 Derating Curve EFFICIENCY GRAPHS DCLSR01-12S05 Efficiency vs. Input Voltage 5/12/2016 DCLSR01-12S05 Efficiency vs. Output Load Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 5 DCLSR01 SERIES Up to 15 Watts DC/DC Converter Single Output Rev A MECHANICAL DRAWINGS PIN CONNECTION PIN DEFINE 1 +Vin 5 +Vout 6 NC 7 GND 9 GND 10 NC NOTES: 1. All dimensions in inch (mm) 2. Tolerance: x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin pitch tolerance ±0.004(0.1) MODEL NUMBER SETUP DCLSR01 Series Name - 24 S 12 Input Voltage Output Quantity Ouptut Voltage 05: 3.0~5.5VDC S: Single 1P2: 1.2VDC 12: 4.6~36VDC 1P5: 1.5VDC 24: 12~36VDC 1P8: 1.8VDC 2P5: 2.5VDC 3P3: 3.3VDC 05: 5VDC 6P5: 6.5VDC 09: 9VDC 12: 12VDC 15: 15VDC 5/12/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 5 Rev A DCLSR01 SERIES Up to 15 Watts DC/DC Converter Single Output COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 5/12/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 5 of 5