Model # BXHF1089 High Frequency Microwave Amplifier Frequency Range: 6 to 12 GHz Features • High Output Power: +19 dBm Typical • Laser Welded Housing for Ultimate Environmental Protection • Internal Voltage Regulator • RoHS Compliant Option: Model BXHF1089LF • EAR99 Model BXHF1089 is a high frequency amplifier covering 6 to 12 GHz. This design utilizes a laser sealed housing for superior environmental protection. This standard design may also be ordered in a screened MILSTD-883 version (Model #SXHF1089.) All specification ratings are based on measurements in a 50 Ω (ohm) system with a DC supply voltage tolerance of +/- 2%. Technical Specifications Maximum Ratings Parameter Unit Typical Min/Max Frequency Range GHz 6 to12 6 to 12 Gain dB 20 Noise Figure dB Output Power @ 1 dB Compression Maximum (No Damage) Ratings Storage Temperature -55°C to +85°C 19 (Min.) Operating Temperature -40°C to +85°C 7.0 8.0 (Max.) DC Voltage @ 25°C +18 volts dBm 19 18 (Min.) Input Drive @ 25°C (CW) +13 dBm Output 3rd Order Intercept dBm 30 - Output 2nd Order Intercept dBm 39 - Reverse Isolation dB 25 - Input VSWR --- 1.5:1 2.0:1 (Max.) Output VSWR --- 1.5:1 2.0:1 (Max.) Supply Voltage volts +12 to +15 +12 to +15 Supply Current mA 125 140 (Max.) * Typical values are measured at 25°C, but not guaranteed. Mechanical & Electrical Parameter Specification Specification Temperatures (Min/Max) -20°C to +70°C Housing Size 1.500” L x 1.060” W x 0.300” H Housing Drawing HF2 Package RF Connectors SMA Female Replaceable Connectors Rev Date: 9/22/2015 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXHF1089 Typical Performance Graphs Rev Date: 9/22/2015 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXHF1089 Instructions Grounding Instructions Care should be taken to effectively ground each unit. Revisions API reserves the right to make revisions to both product and/or the information contained within their datasheets without advanced notice. Min./Max. Values Specifications are guaranteed when tested in a 50 Ω (ohm) system. Typical performance graphs and values are measured at 25°C, but not guaranteed. Outline Drawing (outlines for reference only) Rev Date: 9/22/2015 © API Technologies Corp. Proprietary Information Page # 3 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]