Model # BXMP1170 Ultra High Linearity RF Amplifier Frequency Range: 300 kHz to 70 MHz Features • Ultra High Linearity: +113 dBm • High Output Power: 2 watts • High Efficiency Design • Broad Bandwidth: 300 kHz to 70 MHz Model BXMP1170 is a high linearity amplifier covering 300 kHz to 70 MHz. This design also offers exceptional efficiency consuming only 350 mA while delivering 2 watts of output power. This standard design may also be ordered in a screened MIL-STD-883 version (Model #SXMP1170.) All specification ratings are based on measurements in a 50 Ω (ohm) system with a DC supply voltage tolerance of +/- 2%. Technical Specifications Maximum Ratings Parameter Unit Typical Min/Max Frequency Range MHz 300 kHz to 70 MHz 300 kHz to 70 MHz Gain dB 16 15 Gain Flatness dB +/- 0.5 - Noise Figure* dB 6.0 7.0 Output Power @ 1 dB Compression dBm 33 31 Output 3rd Order Intercept ** dBm 57 Maximum (No Damage) Ratings Storage Temperature -65°C to +125°C Operating Temperature -40°C to +85°C DC Voltage @ 25°C +25 volts Input Drive @ 25°C (CW) +20 dBm • Typical values are measured at 25°C, but not guaranteed. • * Noise Figure measurements taken and guaranteed only from10 MHz to 70 MHz. • ** IP3 and IP2 measurements acquired and guaranteed only at 15 MHz. 55 Output 2nd Order Intercept ** dBm 113 110 Reverse Isolation dB 50 - Input VSWR --- 1.5:1 2.0:1 Output VSWR --- 1.5:1 2.0:1 Supply Voltage volts +24 +24 Supply Current mA 350 400 Mechanical & Electrical Parameter Specification Specification Temperatures (Min/Max) 0°C to +50°C Housing Size 2.980” L x 3.905” W x .757” H Housing Drawing SMA Connectorized Housing Rev Date: 6/18/2014 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXMP1170 Typical Performance Graphs Noise Figure (dB) 20 10 19 9.5 18 9 17 8.5 16 8 Noise (dB) Gain (dB) Gain (dB) 15 14 7.5 7 13 6.5 12 6 11 5.5 10 .1 .3 1 10 5 70 10 20 30 Frequency (MHz) 40 50 60 70 Frequency (MHz) Reverse Isolation (dB) 1 dB Compression (dBm) 35 60 55 33 Rev. Isolation (dB) 1 dB Comp. (dBm) 34 32 31 30 29 28 27 50 45 40 35 26 25 .1 .3 1 10 30 70 .1 .3 1 Frequency (MHz) Output VSWR 2 1.9 1.8 1.7 Output VSWR Input VSWR 70 Frequency (MHz) Input VSWR 1.6 1.5 1.4 1.3 1.2 1.1 1 .1 10 .3 1 10 Frequency (MHz) 70 2 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1 .1 .3 1 Frequency (MHz) 10 Rev Date: 6/18/2014 © API Technologies Corp. Proprietary Information 70 Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXMP1170 Instructions Grounding Instructions Care should be taken to effectively ground each unit. Revisions API reserves the right to make revisions to both product and/or the information contained within their datasheets without advanced notice. Min./Max. Values Specifications are guaranteed when tested in a 50 Ω (ohm) system. Typical performance graphs and values are measured at 25°C, but not guaranteed. Outline Drawing Rev Date: 6/18/2014 © API Technologies Corp. Proprietary Information Page # 3 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]