Model # TM9695PM Available as: TM9695PM, 4 Pin TO-8 (T4) TN9695PM, 4 Pin 0.450” Sq. Surface Mount (SM3) Standard RF/Microwave Amplifier BX9695PM, SMA Connectorized Housing (H1L) Features • Frequency Range: 10 MHz to 600 MHz • Superior Phase Noise Performance • High Output Power • High Linearity Model TM9695PM is a standard high performance RF amplifier covering 10-600 MHz. This Silicon BiPolar design offers guaranteed superior phase noise performance. This standard design may also be ordered in a screened MIL-STD-883 version (Model # SM9695PM) All specification ratings are based on measurements in a 50 Ω (ohm) system with a DC supply voltage tolerance of +/- 2%. Technical Specifications Maximum Ratings Parameter Typical Min/Max 10 MHz - 600 MHz 10 MHz - 600 MHz Gain 13 dB 12.0 dB Noise Figure 5.5 dB 8.0 dB Case Temperature +125°C Output Power @ 1 dB Compression 27 dBm 25.5 dBm DC Voltage @ 25°C + 17 volts Output 3rd Order Intercept 42 dBm --- Continuous RF Input Power + 16 dBm Output 2nd Order Intercept 49 dBm --- Short Term RF Input Power 50 Milliwatts (1 Minute Max.) 17 dB --- Frequency Range Reverse Isolation Maximum (No Damage) Ratings Storage Temperature -62°C to +125°C Operating Temperature -55°C to +125°C 0.1 Watt (3 μsec Max.) Maximum Peak Power Input VSWR 1.5:1 2.0:1 Output VSWR 1.5:1 2.0:1 Supply Voltage 15 volts 15 volts Supply Current 180 mA 195 mA Note1) Typical values are measured at 25°C, but not guaranteed. Note 2) Junction to Case Temperature Rise: +45°C. Note 3) Phase Noise Measurements taken at midband. Guaranteed Phase Noise Performance (dBc/Hz) Phase Noise (dBc/Hz) -130 Frequency (Offset) -140 -150 Typical Guaranteed 10 Hz -160 -145 100 Hz -165 -155 1 kHz -175 -170 10 kHz -180 -175 100 kHz -182 -175 1 MHz -182 -175 -160 -170 -180 1010 Hz 100 100 Hz 11000 kHz 10000 10 kHz 100000 100 kHz 1000000 1 MHz Rev Date: 12/10/2014 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # TM9695PM Instructions Grounding Instructions Care should be taken to effectively ground each unit. Revisions API reserves the right to make revisions to both product and/or the information contained within their datasheets without advanced notice. Min./Max. Values Specifications are guaranteed when tested in a 50 Ω (ohm) system. Typical performance graphs and values are measured at 25°C, but not guaranteed. BX9659PM Housing Outline for reference only Rev Date: 12/10/2014 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]