Model # BXMP1237 Medium Power RF Amplifier Frequency Range: 200 MHz to 500 MHz Features • Ultra Low Noise Figure: 0.9 dB • High Output Power: +29 dBm • High Linearity: +61 dBm (IP2) • EAR99 Model H1L (Single Stage) • Unconditionally Stable Model BXMP1237 is a high performance medium power amplifier covering a wide 200-500 MHz bandwidth. This design also offers excellent linearity and Ultra Low Noise Performance and a laser welded housing for the ultimate in environmental protection. This standard model may also be modified or customized in order to optimize any one particular parameter). All specification ratings are based on measurements in a 50 Ω (ohm) system with a DC supply voltage tolerance of +/- 2%. Technical Specifications Maximum Ratings Parameter Unit Typical Min/Max Frequency Range MHz 200-500 200-500 Gain dB 42 Noise Figure dB Output Power @ 1 dB Compression Maximum (No Damage) Ratings Storage Temperature -62°C to +125°C 40 Operating Temperature -55°C to +100°C 0.9 1.5 DC Voltage @ 25°C +18 volts dBm +29 +27.5 Input Drive @ 25°C (CW) +18 dBm Output 3rd Order Intercept dBm 44 --- Output 2nd Order Intercept dBm 61 --- Reverse Isolation dB -70 --- Input VSWR --- 1.5:1 2.0:1 Output VSWR --- 1.5:1 2.0:1 Supply Voltage volts +15 +15 Supply Current mA 390 425 • Typical values are measured at 25°C, but not guaranteed. • All specifications noted when measured into a 50 ohm load. Mechanical & Electrical Parameter Specification Specification Temperatures (Min/Max) -55°C to +85°C Housing Size 1.36” L x 0.66” W x 0.33” H Housing Drawing H2L (SMA Connectorized) Rev Date: 2/5/2016 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXMP1237 Typical Performance Graphs Rev Date: 2/5/2016 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXMP1237 Instructions Grounding Instructions Care should be taken to effectively ground each unit. Revisions API reserves the right to make revisions to both product and/or the information contained within their datasheets without advanced notice. Min./Max. Values Specifications are guaranteed when tested in a 50 Ω (ohm) system. Typical performance graphs and values are measured at 25°C, but not guaranteed. Outline Drawing (H2L) (For reference only) Rev Date: 2/5/2016 © API Technologies Corp. Proprietary Information Page # 3 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]