Model # BXMP1220 Medium Power RF Amplifier Frequency Range: 50-1000 MHz Features • Wide Bandwidth: 50-1000 MHz • High Output Power: +31 dBm • High Linearity: +54 dBm (IP2) Model H1L (Single Stage) Model BXMP1220 is a high performance medium power amplifier covering a wide 50-1000 MHz bandwidth. This design also offers excellent linearity and a laser welded housing for the ultimate in environmental protection. This standard model may also be modified or customized in order to optimize any one particular parameter.) All specification ratings are based on measurements in a 50 Ω (ohm) system with a DC supply voltage tolerance of +/- 2%. Technical Specifications Maximum Ratings Parameter Unit Typical Min/Max Frequency Range MHz 50-1000 50-1000 Gain dB 13 Noise Figure dB Output Power @ 1 dB Compression Maximum (No Damage) Ratings Storage Temperature -62°C to +125°C 12 Operating Temperature -55°C to +100°C 6.0 7.5 DC Voltage @ 25°C +18 volts dBm +31 +30 Input Drive @ 25°C (CW) +18 dBm Output 3rd Order Intercept dBm 45 --- Output 2nd Order Intercept dBm 54 --- Reverse Isolation dB -17 --- Input VSWR --- 1.5:1 2.0:1 Output VSWR --- 1.5:1 2.0:1 Supply Voltage volts +15 +15 Supply Current mA 400 500 * Typical values are measured at 25°C, but not guaranteed. Mechanical & Electrical Parameter Specification Specification Temperatures (Min/Max) -55°C to +85°C Housing Size 0.820” L x 1.000” W x 0.440” H Housing Drawing H1L Rev Date: 4/29/2015 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXMP1220 Typical Performance Graphs Rev Date: 4/29/2015 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXMP1220 Instructions Grounding Instructions Care should be taken to effectively ground each unit. Revisions API reserves the right to make revisions to both product and/or the information contained within their datasheets without advanced notice. Min./Max. Values Specifications are guaranteed when tested in a 50 Ω (ohm) system. Typical performance graphs and values are measured at 25°C, but not guaranteed. Rev Date: 4/29/2015 © API Technologies Corp. Proprietary Information Page # 3 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]