Radar Transmitter Level Application Questionnaire (Please fill out front and back.) REFERENCE INFORMATION Application same as previous M#: Customer/Company: SIC: City, State, Country: Date: signature Contact/Title: Phone: FOR OFFICE USE: Fax: E-mail: RFQ Number: P. O. Number: Tag Number(s): Submitted by: Rep Agency and Salesperson Rep Code: R 8 2 RX5 MODEL NUMBER 5 Housing: Aluminum Lexan Antenna: Tefzel A Antenna Transmitter R82 MODEL NUMBER 0 Quantity Polypropylene R 5 5 0 A 0 Quantity R A 0 0 PROCESS DATA Process Name/Description: Process Media: Media Constants: Liquid: Dielectric Constant: Conductivity: Process Temperature: AMB ATMOS Process Pressure: Temperature at Instrument: AMB Will media coat antenna? No Environment: Normal Agency: CSA ATEX Required Materials of Construction: Tank Type: Vertical Cylindrical max. min. max. min. max. Condensation Corrosive FM min. Salt Film Coating °C Other KPA Hazardous: Cl Other Div Group Sphere Sump/Pit (covered) Other Size: Width Plastic Horizontal Cylinder Dish °F to Hazardous Area Design: Explosion-proof Intrinsically Safe Nonincendive Other Tank Material of Construction: Metal Tank Bottom: Flat Other Bar Area Classification: General Purpose (Nema 4X) Horizontal Cylindrical Tank Size: Height Flat °C Significant Coating Flood Yes, from °F PSIG Flow: Element Type (Enclosed) Tank Top: Varies? No (µ siemen/cm) Slurry % Solids % Concentration Cone Concrete Dome Other Diameter Irregular NPT BSP Process Connection: Threaded Lined: Yes No Non-metallic Unit of Measure Coated: Yes No Other Flange (size/type) Distance to Sidewall Nozzle: Height Stillwell (metal only): Yes Type of Filling: Top Agitation: Yes (Include any amount that extends into vessel) No Bottom Material Side (At what level? ) No During Filling During Emptying Between Fill and Empty Turbulence: None Light Medium Mixer: Number of Blades Heavy Blade Size Number of Stages Rate of Change (Inches (mm)/minute): <5(13) Foam: None Diameter Inside Diameter Light Medium Does liquid boil and/or flash: Yes Other Objects in Vessel: Yes 5–20(13–50) Heavy 20–60(50–150) RPM Maximum thickness of foam layer No No (Include sketch on back.) PERFORMANCE Measurement requirement (with respect to the bottom of the vessel): What is the maximum level height of the material?: Unit of Measure: What is the minimum level height of the material?: Unit of Measure: The typical operating level is Accuracy Required: During filling: Height of Each Stage >60(150) High Level Shutdown/Overfill Protection Special consideration is necessary in any application for High Level Shutdown/Overfill protection. To ensure proper measurement, Consult Factory. Unit of Measure: % When level is stationary: During emptying: % % When level is stationary and agitated: % BULLETIN: 58-340.3 Ideal (1/2 radius) FIGURE 1 - Tank Top FIGURE 3 - NOZZLES C A Distance to tank wall: B A = Diameter B = Length Sensor Reference Point Sensor Offset FIGURE 2 Blocking Distance C = Mounting NOTES: R82 Safety Zone 1. End of antenna should never be recessed more than 2× the nozzle diameter Highest Level Value Distance 2. Nozzle should not exceed Schedule 40 Tank Height Media Level NOTES: RX5 1. Minimum 2" diameter 2. 2" or 3" diameter: maximum length 12" 3. 4" diameter: maximum length 15" Lowest Measurable Value Level Offset Show location and relative size of all false targets (Figures 1 & 2) Mixing blades: sketch top and side view 5300 Belmont Road • Downers Grove, Illinois 60515-4499 • 630-969-4000 • Fax 630-969-9489 145 Jardin Drive, Units 1 & 2 • Concord, Ontario Canada L4K 1X7 • 905-738-9600 • Fax 905-738-1306 www.magnetrol.com BULLETIN: 58-340.3 EFFECTIVE: January 2011 SUPERSEDES: July 2009