Radial Lead Fuses TE5 > Time-Lag Fuse > 392 Series 392 Series, TE5 Time-Lag Fuse RoHS Pb PS E Description TE5 Fuse, Time-Lag type, 250V rated, designed in accordance to IEC 60127-3. Features • • • • • Reduced PCB space requirements • Direct solderable or plug-in versions • Internationally approved Applications Agency Approvals Agency Agency File Number PS E Low internal resistance Shock safe casing Vibration resistant Halogen free, Lead-free and RoHS compliant Ampere Range 126983 0.28A - 6.3A 1410866 1026673 0.8A - 4A 5A - 6.3A E67006 0.28A - 6.3A JET1896-31007-2002 1A - 5A CQC07012021162 0.8A - 6.3A SU05024 - 7013A SU05024 - 7014A SU05024 - 7015A SU05024 - 7016A SU05024 - 7017A SU05024 - 7018A • Battery Chargers • Industrial Controllers • Consumer Electronics •Chargers • Power supplies Additional Information Datasheet Samples Resources Electrical Characteristics for Series % of Ampere Rating 150% 0.8A - 6.3A Opening Time 1 Hour, Min. 210% 120 s, Max. 275% 400 ms Min. ; 10 Sec. Max. 400% 150 ms Min. ; 3 Sec. Max. 1000% 20 ms Min. ; 150 ms Max. Electrical Characteristic Specifications by Item Agency Approvals Rated Current Amp Code Voltage Rating Breaking Capacity Nominal Cold Resistance (Ohms) Voltage Drop 1.0×IN max. (mV) Power Dissipation 1.5×IN max. (mW) Melting Integral 10×IN max. (A2s) 280 mA 0280 250V 35A@250VAC 0.3300 115 168 0.048 x 800 mA 0800 250V 0.0960 110 280 5.120 x x x x x 1.00 A 1100 250V 0.0715 115 400 8.00 x x x x x x 1.25 A 1125 250V 1.60 A 1160 250V 2.00 A 1200 250V 2.50 A 1250 250V 3.15 A 1315 250V 32A@250VAC 4.00 A 1400 250V 40A@250VAC 5.00 A 1500 250V 6.30 A 1630 250V PS E x 0.0569 100 500 11.95 x x x x x x 0.0400 95 600 18.43 x x x x x x 0.0298 90 700 29.00 x x x x x x 0.0240 85 750 47.81 x x x x x x 0.0170 80 1100 78.39 x x x x x x 0.0128 75 1200 126.40 x x x x x x 50A@250VAC 0.0101 70 1000 106.25 x x x x x x 63A@250VAC 0.0077 65 1200 160.74 x x x x x 25A@250VAC Notes: 1) 1.00 means the number one with two decimal places. 1,000 means the number one thousand. 2) Resistance is measured at 10% of rated current, 25ºC. © 2016 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 04/19/16 Radial Lead Fuses TE5 > Time-Lag Fuse > 392 Series 140 100000 120 PERCENT OF RATING 0.800A 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A Average Time Current Curves 0.280A Temperature Re-rating Curve 100 10000 80 60 40 1000 23°C TIME IN SECONDS 20 0 -40 -20 0 20 40 80 60 AMBIENT TEMPERATURE (°C) Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 100 10 1 0.1 0.01 0.001 0.20 1 10 100 1000 CURRENT IN AMPERES Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter 240 220 Preheat: 200 (Depends on Flux Activation Temperature) 180 160 140 120 100 80 60 40 Time (Seconds) Cooling Time Preheat Time Dwell Time © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/19/16 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 20 0 10 20 0 Temperature (°C) - Measured on bottom side of board 300 Lead-Free Recommendation (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Radial Lead Fuses TE5 > Time-Lag Fuse > 392 Series Product Characteristics Materials Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94 V-0 Round Pins: Copper, Tin-plated Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260ºC, ≤ 3 sec. (Wave) 350ºC, ≤ 3 sec. (Soldering iron) Soldering Heat Resistance 260ºC, 10 sec. (IEC 60068-2-20) 350ºC, ≤ 3 sec. (Soldering iron) Operating Temperature Climatic Category Stock Condition Dimensions Vibration Resistance –40ºC to +85ºC (Consider re-rating) –40ºC to +85ºC/21 days (IEC 60068-1, -2-1, -2-2, -2-78) +10ºC to +60ºC Relative humidity ≤ 75% yearly average, without dew, maximum value for 30 days - 95% 24 cycles at 15 min. each (IEC 60068-2-6) 10 – 60Hz at 0.75mm amplitude 60 – 2000Hz at 10g acceleration Part Numbering System max. 4 8.5 0.6 5.08 1 +0.1 0.5 min L max. 8 392 xxxx 0000 Series 1.5 Amp Code Refer to Amp Code column of Electrical Characteristics Table Packaging Code 0000 Tape/Ammopack (1,400 pcs.) 0440 Short Leads - Bulk (1,400 pcs.) Holes in the printed circuit board Long Leads (L=18.8mm) Short Leads (L=4.3mm) Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width Tape and Ammopack Short Leads N/A N/A 1,400 1,400 0000 0440 N/A N/A © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/19/16