Radial Lead Fuses TE5® > Time-Lag > 396 Series 396 Series, TE5® Time-Lag Fuse Description The 396 Series are TE5®, time-Lag type, 125V rated, fuses, designed in accordance to UL 248-14. Features • Shock safe casing • Reduced PCB space requirements • Vibration resistant • Direct solderable or plug-in versions • Available from 50mA to 6.3A • Halogen free • Internationally approved Agency Approvals Agency • Lead-free Agency File Number File number: E 67006 File number: E 67006 • Low internal resistance Ampere Range Applications 50mA - 6.3A 50mA - 6.3A JET1896-31007-1002 1A - 5A Electrical Characteristics • Battery chargers • Power supplies • Consumer Electronics • Industrial controllers Additional Information % of Ampere Rating Opening Time 200% 60 Seconds, Max. Datasheet Samples Resources Electrical Characteristics Amp Code Rated Current Voltage Rating 0050 0063 0080 0100 0125 0160 0200 0250 0315 0400 0500 0630 0800 1100 1125 1160 1200 1250 1315 1400 1500 1630 50mA 63mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 400mA 500mA 630mA 800mA 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V Power Dissipation 1.0×IN max. (mW) Melting Integral 10×IN min. (A2s) Agency Approvals Breaking Capacity Voltage Drop 1.0×IN max. (mV) 100A / 125 VAC 50-60 Hz cos ϕ = 1.0 900 800 700 600 550 480 390 350 300 250 220 210 160 155 145 130 125 120 110 110 95 95 45 50 55 60 70 80 80 90 95 100 110 135 130 155 185 210 250 300 350 400 475 570 0.0056 0.009 0.014 0.025 0.044 0.058 0.1 0.17 0.26 0.32 0.58 0.75 0.98 2.2 3.8 5.2 7.5 14 22 27 59 100 x x x x x x x x x x x x x x x x x x x x x x Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand. © 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/19/13 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Radial Lead Fuses TE5® > Time-Lag > 396 Series 140 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A 0.630A 0.800A 0.250A 0.315A 0.400A 0.500A Average Time Current Curves 0.050A 0.063A 0.080A 0.100A 0.125A 0.160A 0.200A Temperature Rerating Curve 100000 PERCENT OF RATING 120 100 10000 80 60 1000 40 23°C TIME IN SECONDS 20 0 -40 -20 0 20 40 80 60 AMBIENT TEMPERATURE (°C) 100 10 1 0.100 0.010 0.001 0.02 0.100 1 10 100 CURRENT IN AMPERES Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter 240 220 Preheat: 200 (Depends on Flux Activation Temperature) 180 160 140 120 100 80 60 40 Lead-Free Recommendation (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: Preheat Time: 150° C 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Time (Seconds) Cooling Time Preheat Time Dwell Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 20 0 10 20 0 Temperature (°C) - Measured on bottom side of board 300 Recommended Hand-Solder Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. © 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/19/13 Radial Lead Fuses TE5® > Time-Lag > 396 Series Product Characteristics Materials Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94 V-0 Round Pins: Copper, Tin-plated Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s. (Soldering Iron) -40ºC to +85ºC (consider de-rating) Operating Temperature -40ºC to +85ºC/21 days (EN 60068-1,-2-1,-2-2,-2-78) +10 ºC to +60 ºC RH ≤ 75% yearly average, without dew, maximum value for 30 days95% 24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration Climatic Category Stock Conditions Vibration Resistance Part Numbering System Dimensions 396 xxxx 0000 max.4 Series 5,08 0,5 min Amp Code Æ 0,6 Refer to Amp Code column of Electrical Characteristics Table 1,5 Packaging Code 0000 Tape/Ammopack (1,400 pcs.) 0440 Short Leads - Bulk (1,400 pcs.) 1 +0,1 L max. 8 8,5 Holes in the printedin circuit board Holes PCB Long Leads (L=18.8mm) Short Leads (L=4.3mm) Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width N/A N/A 1,400 1,400 0000 0440 N/A N/A 396 Series Tape & Ammopack Short Leads © 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/19/13