DOMINANT Opto Technologies Innovating Illumination DomiLED TM DATA SHEET: Right Angle DomiLEDTM InGaN White : DSW-LSG TM Synonymous with function and performance, the DomiLED series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness. TM Features: > > > > > > > > > High brightness surface mount LED. Designed for sideway illumination. 120° viewing angle. Small package outline. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Qualified based on AEC-Q101 Standard. Superior corrosion resistant. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Consumer Appliances: LCD illumination as in PDAs, LCD TV. > Display: full color display video notice board. > Industry: white goods (eg: Oven, microwave, etc.). © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 10/03/2016 V11.0 DOMINANT TM InGaN White : DSW-LSG Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Color Luminous Intensity @ 20mA IV (mcd) Min. Typ. Max. DSW-LSG-V2W-1 White 120 900.0 1400.0 1800.0 DSW-LSG-WX1-1 White 120 1125.0 1800.0 2240.0 DSW-LSG-WX1-JKPL White 120 1125.0 1800.0 2240.0 Viewing Angle˚ Not for new design NOTE 1. All part number above comes in a quantity of 2500 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Color binning is carried for all units as per the color-binning table. Only one color group is allowed for each reel. Vf @ If = 20mA Vr @ Ir = 10uA Part Number Min. (V) Typ. (V) Max. (V) Min. (V) DSW-LSG 2.8 3.2 3.6 5.0 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value Unit DC forward current 20 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.005) 100 mA 5 V ESD threshold (HBM) 2000 V LED junction temperature 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 80 mW - Junction / ambient, Rth JA 460 K/W - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 5 mm2 per pad) 240 K/W Reverse voltage; Ir (max) = 10uA Power dissipation (at room temperature) Thermal resistance 2 10/03/2016 V11.0 DOMINANT TM InGaN White : DSW-LSG Opto Technologies Innovating Illumination White Color Grouping For this color bin selection, part number will be DSW-LSG-xxxx-1 Dominant White Bin Structure 0.44 0.42 0.40 0 40 0.38 0.36 C3 0.34 C1 0.32 0.32 C2 A3 0.30 A4 A1 0.28 V3 0.26 V1 0.24 C4 A2 V4 V2 0.22 0.20 0 20 0.18 0.16 0.24 0.26 0.28 0.3 0.32 0.34 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. 1 2 3 4 Cx 0.2525 0.2650 0.2650 0.2525 Cy 0.2318 0.2525 0.2700 0.2493 Cx 0.2525 0.2650 0.2650 0.2525 Cy 0.2143 0.2350 0.2525 0.2318 Cx 0.2650 0.2775 0.2775 0.2650 Cy 0.2525 0.2732 0.2907 0.2700 Cx 0.2650 0.2775 0.2775 0.2650 Cy 0.2350 0.2557 0.2732 0.2525 Cx 0.2775 0.2900 0.2900 0.2775 Cy 0.2732 0.2939 0.3114 0.2907 Cx 0.2775 0.2900 0.2900 0.2775 Cy 0.2557 0.2764 0.2939 0.2732 Cx 0.2900 0.3025 0.3025 0.2900 Cy 0.2939 0.3146 0.3321 0.3114 Cx 0.2900 0.3025 0.3025 0.2900 Cy 0.2764 0.2971 0.3146 0.2939 Cx 0.3025 0.3150 0.3150 0.3025 Cy 0.3146 0.3354 0.3529 0.3321 Cx 0.3025 0.3150 0.3150 0.3025 Cy 0.2971 0.3179 0.3354 0.3146 Cx 0.3150 0.3275 0.3275 0.3150 Cy 0.3354 0.3561 0.3736 0.3529 Cx 0.3150 0.3275 0.3275 0.3150 Cy 0.3179 0.3386 0.3561 0.3354 Bin V1 V2 V3 V4 A1 A2 A3 A4 C1 C2 C3 C4 Dominant color coordinate is measured with an accuracy of ± 0.01. 3 10/03/2016 V11.0 DOMINANT DOMINANT TM TM InGaN InGaNWhite White::DSW-LSG DSW-LSG Opto OptoTechnologies Technologies Innovating Illumination Innovating Illumination White WhiteColor ColorGrouping Grouping For this color bin selection, part number will be DSW-LSG-xxxx-1 (Not Offer For New Design) For this color bin selection, part number will be DSW-LSG-xxxx-1 White WhiteBin BinStructure Structure 0.40 4,500K 0.38 5,000K UU 5,650K 0.36 6,300K 7,000K 0.34 WU XU 0.32 10,000K UL VL WL XL YU 0.30 VU YL 0.28 0.26 0.24 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 Chromaticity coordinate groups are measured with an accuracy of ± 0.01.of ± 0.01. Chromaticity coordinate groups are measured with an accuracy Bin Bin YU YU YL YL XU XU XL XL WU WU WL WL VU VU VL VL UU UU UL UL Cx Cx Cy Cy Cx Cx Cy Cy Cx Cx Cy Cy Cx Cx Cy Cy Cx Cx Cy Cy Cx Cx Cy Cy Cx Cx Cy Cy Cx Cx Cy Cy Cx Cx Cy Cy Cx Cx Cy Cy 11 22 0.283 0.283 0.284 0.284 0.290 0.290 0.270 0.270 0.307 0.307 0.316 0.316 0.310 0.310 0.299 0.299 0.317 0.317 0.325 0.325 0.319 0.319 0.310 0.310 0.329 0.329 0.336 0.336 0.329 0.329 0.319 0.319 0.345 0.345 0.350 0.350 0.343 0.343 0.331 0.331 0.274 0.274 0.301 0.301 0.283 0.283 0.284 0.284 0.303 0.303 0.333 0.333 0.307 0.307 0.316 0.316 0.315 0.315 0.343 0.343 0.317 0.317 0.325 0.325 0.329 0.329 0.354 0.354 0.329 0.329 0.336 0.336 0.347 0.347 0.368 0.368 0.345 0.345 0.350 0.350 33 0.307 0.307 0.316 0.316 0.310 0.310 0.299 0.299 0.317 0.317 0.325 0.325 0.319 0.319 0.310 0.310 0.329 0.329 0.336 0.336 0.329 0.329 0.319 0.319 0.345 0.345 0.350 0.350 0.343 0.343 0.331 0.331 0.361 0.361 0.365 0.365 0.357 0.357 0.343 0.343 44 0.303 0.303 0.333 0.333 0.307 0.307 0.316 0.316 0.315 0.315 0.343 0.343 0.317 0.317 0.325 0.325 0.329 0.329 0.354 0.354 0.329 0.329 0.336 0.336 0.347 0.347 0.368 0.368 0.345 0.345 0.350 0.350 0.364 0.364 0.383 0.383 0.361 0.361 0.365 0.365 InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. Current pulsing should be used for dimming purposes. 4 4 10/03/2016 V11.0 04/07/2013 V6.0 05 25 60 55 00 70 70 20 86 26 86 91 84 71 84 30 05 56 97 31 88 81 88 82 82 15 82 92 DOMINANT TM InGaN White : DSW-LSG Opto Technologies Innovating Illumination White Color Grouping For this color bin selection, part number will be DSW-LSG-xxxx-JKPL 4 0.3045 0.2715 0.3005 0.2825 0.3130 0.2840 0.3100 0.2970 0.3386 0.3235 0.3386 0.3426 0.3484 0.3388 0.3484 0.3571 0.3130 0.2840 0.3100 0.2970 0.3205 0.2956 0.3197 0.3131 0.3582 0.3542 0.3582 0.3715 White Bin Structure 1 0.2960 0.2590 0.291 0.2680 0.3045 0.2715 0.3005 0.2825 0.3288 0.3081 0.3288 0.3282 0.3386 0.3235 0.3386 0.3426 0.3100 0.2970 0.3070 0.3120 0.3197 0.3131 0.3189 0.3302 0.3484 0.3388 0.3484 0.3571 0.3900 0.3800 0.3700 PL 0.3600 OL 0.3500 NL 0.3400 0.3300 ML 0.3200 0.3100 OK NK MK LL 0.3000 PK LK KL 0.2900 KK JL 0.2800 0.2700 JK 0.2600 0.2500 0.2400 0.2300 0.2700 0.2800 0.2900 0.3000 0.3100 0.3200 0.3300 0.3400 0.3500 0.3600 0.3700 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. 1 2 3 4 Cx 0.2960 0.2910 0.3005 0.3045 Cy 0.2590 0.2680 0.2825 0.2715 Cx 0.291 0.2850 0.2960 0.3005 Cy 0.2680 0.2790 0.2955 0.2825 Cx 0.3045 0.3005 0.3100 0.3130 Cy 0.2715 0.2825 0.2970 0.2840 Cx 0.3005 0.2960 0.3070 0.3100 Cy 0.2825 0.2955 0.3120 0.2970 Cx 0.3288 0.3288 0.3386 0.3386 Cy 0.3081 0.3282 0.3426 0.3235 Cx 0.3288 0.3288 0.3386 0.3386 Cy 0.3282 0.3453 0.3591 0.3426 Cx 0.3386 0.3386 0.3484 0.3484 Cy 0.3235 0.3426 0.3571 0.3388 Cx 0.3386 0.3386 0.3484 0.3484 Cy 0.3426 0.3591 0.3730 0.3571 Cx 0.3100 0.3197 0.3205 0.3130 Cy 0.2970 0.3131 0.2956 0.2840 Cx 0.3070 0.3189 0.3197 0.3100 Cy 0.3120 0.3302 0.3131 0.2970 Bin JK JL KK KL NK NL OK OL LK LL 5 10/03/2016 V11.0 DOMINANT TM InGaN White : DSW-LSG Opto Technologies Innovating Illumination 1 2 3 4 Cx 0.3197 0.3288 0.3288 0.3205 Cy 0.3131 0.3282 0.3081 0.2956 Cx 0.3189 0.3288 0.3288 0.3197 Cy 0.3302 0.3452 0.3282 0.3131 Cx 0.3484 0.3484 0.3582 0.3582 Cy 0.3388 0.3571 0.3715 0.3542 Cx 0.3484 0.3484 0.3582 0.3582 Cy 0.3571 0.3730 0.3792 0.3715 Bin MK ML PK PL InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. 6 10/03/2016 V11.0 DOMINANT TM InGaN White : DSW-LSG Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group V2 900.0 ... 1125.0 W1 1125.0 ... 1400.0 W2 1400.0 ... 1800.0 X1 1800.0 ... 2240.0 Luminous intensity is measured with an accuracy of ± 11%. Vf Binning (Optional) Vf Bin @ 20mA Group Forward Wavelength Voltage (V) distribution (nm) V1 2.75 ... 3.05 V2 3.05 ... 3.35 V3 3.35 ... 3.65 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Please consult sales and marketing for special part number to incorporate Vf binning. 7 10/03/2016 V11.0 DOMINANT InGaN White : DSW-LSG Opto Technologies Innovating Illumination Forward Current Vs Forward Voltage 2.5 50 2 40 Forward Current, mA Relative Intensity; Normalized at 20mA Relative Intensity Vs Forward Current 1.5 1 0.5 30 20 10 0 0 0 10 20 30 40 50 2 2.5 3 3.5 4 Forward Current; mA Forward Voltage, V Maximum Forward Current Vs Ambient Temperature Relative Intensity Vs Wavelength 1 25 0.8 20 Relative Intensity Forward Current, mA 0.9 15 10 10 Instrument Systems CAS140B Keithley 2400 Chromaticity vs forward current test 30 40 0.5 0.4 0.3 0 28th May 2015 Date : 20 0.6 0.1 FAE0043_LED Optical5Measuremnet 0 0.7 0.2 Measurement Report t Equipment : e: : TM 50Measurement 60 70 condition 80 90 100 Temperature : Ambient Temperature Humidity : Requestor 400 450 25 °C <65% RH May Tan 500 550 600 650 700 Wavelength, nm Chart Radiation Pattern Chromaticity Coordinate Shift Shift ( Tj=25° C ) Chromaticity Coordinate 0.020 0.015 ΔCX , Δ CY ȴCX ,ȴCY Cy 20° 10° 0° 1.0 Delta Cx CX Cy 0.02 0.010 30° Variables 0.03 40° 0.8 0.01 0.005 0.000 Delta CY 0 50° 0.6 60° 0.4 Cx -0.005 -0.01 -0.010 -0.020 70° -0.02 -0.015 80° -0.03 0.0 2.0 0.2 4.0 0 6.0 2 4 8.0 10.0 6 8 12.0 14.0 10 12 16.0 14 18.0 16 20.0 18 90° 20 0 Forward current (mA) Forward current (mA) 8 10/03/2016 V11.0 DOMINANT TM InGaN White : DSW-LSG Opto Technologies Innovating Illumination DomiLED • InGaN White : DSW-LSG Package Outlines TM Note : Primary thermal path is through Cathode lead of LED package. Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Sn-Sn Plating 9 10/03/2016 V11.0 DOMINANT TM InGaN White : DSW-LSG Opto Technologies Innovating Illumination Recommended Solder Pad 10 10/03/2016 V11.0 DOMINANT TM InGaN White : DSW-LSG Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2500 units. • Reel diameter is 180 mm. 11 10/03/2016 V11.0 DOMINANT DOMINANT Opto Technologies TM TM DDx-xRS InGaNAllnGaP White : :DSW-LSG Opto Technologies Innovating Illumination Innovating Illumination Packaging Specification Specification Packaging 10 12 28/10/2010 V8.0 10/03/2016 V11.0 DOMINANT TM InGaN White : DSW-LSG Opto Technologies Innovating Illumination Packaging Specification Existing BPL Moisture sensitivity level size - 87mm x 45mm. As part of improvement and also in response to customers’ request; BPL f Barcode label changed to the following. DOMINANT Opto Technologies (L) Lot No : lotno ML TEMP 2 260˚C RoHS Compliant (P) Part No : partno (C) Cust No : partno (Q) Quantity : quantity (G) Grouping : group (D) D/C : date code Made in Malaysia (S) S/N : serial no New BPL size - 110mm x 55mm. Additional information are now included in the label. 2D and 3D barc Reel implemented now for every data field. Label Moisture absorbent material + Moisture indicator Issue No : 1 The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Right Angle DomiLED 1 completed bag (2500pcs) 0.010 0.034 240 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Right Angle DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Super Small 325 x 225 x 190 0.38 7 reels MAX Small 325 x 225 x 280 0.54 11 reels MAX Medium 570 x 440 x 230 1.46 48 reels MAX Large 570 x 440 x 460 1.92 96 reels MAX 13 10/03/2016 V11.0 DOMINANT TM InGaN White : DSW-LSG Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 225 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 14 10/03/2016 V11.0 DOMINANT TM InGaN White : DSW-LSG Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification 2, 5, 6 Add new partno: DSW-LSG-WX1-JKPL Add Color Bin Structure 18 Apr 2013 2 Update Vf 04 Jul 2013 3 Update Color Bin Structure 28 Oct 2013 7 Add Vf Binning 11 Nov 2014 4 Update Features Not For New Design for Color Bin Structure 14 Apr 2015 8 Add Graph: Chromaticity Vs Forward Current 01 Jun 2015 Add Features Add Notes in Package Outline Update Carrier Tape Update Packaging Specification 10 Mar 2016 1, 9, 11, 13 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 15 10/03/2016 V11.0 DOMINANT TM Opto Technologies InGaN White : DSW-LSG Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM