DOMINANT Opto Technologies Innovating Illumination DomiLED TM DATA SHEET: DomiLEDTM InGaN White : DDW-MJG TM With the intense colors that seem to glow with energy and its significant brightness, DomiLED white LED is a highly reliable design device. Its dynamic nature makes it perfect choice for lighthing applications, office and home applications and standard industrial applications. TM Features: > High brightness surface mount LED. > 120° viewing angle. > > > > > Small package outline. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to both IR reflow soldering. Environmental friendly; RoHS compliance. Compliance to automotive standard; AEC-Q101. Applications: > Automotive: Interior applications, eg: switches, telematics, climate control system, dashboard, etc > Consumer Appliances: Backlighting illumination as in PDAs, LCD TV. > Communication: indicator and backlight in mobile phone, flash light. > Signage: full colour display video notice board, signage, special effect lighting. > Lighting: general lighting. © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 16/10/2015 V6.0 DOMINANT TM InGaN White: DDW-MJG Opto Technologies Innovating Illumination Optical Characteristics at Tj=250C Part Ordering Number Color DDW-MJG-W2X-1 White 120 1400.0 1800.0 2850.0 DDW-MJG-W2X-JKPL White 120 1400.0 1800.0 2850.0 Viewing Angle˚ Luminous Intensity @ IF = 20mA IV (mcd) Min. Typ. Max. NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Color binning is carried for all units as per the color binning table. Only one color group is allowed for each reel. Electrical Characteristics at Tj=250C Part Number Vf @ If = 20 mA Min. (V) Typ. (V) Max. (V) Vr @ Ir = 10 µA Min. (V) 2.8 3.2 3.5 5.0 DDW-MJG Forward Voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value Unit DC forward current 50 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.005) 100 mA 5 V ESD threshold (HBM) 2000 V LED junction temperature 125 ˚C Operating temperature -40 … +110 ˚C Storage temperature -40 … +110 ˚C 180 mW 275 K/W 145 K/W Reverse voltage; Ir max = 10µA Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16mm2 per pad) 2 16/10/2015 V6.0 DOMINANT InGaN White: DDW-MJG Opto Technologies Innovating Illumination Characteristics Temperature coefficient of VF (typ) IF = 20mA; 0 ˚C <= T <= 100˚C Temperature coefficient of IV (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of Cx (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of Cy (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C Symbol Part Number Value Unit TCV DDW-MJG -2.60 mV / K TCIV DDW-MJG -0.10 %/K TCCx DDW-MJG -0.00005 / ˚C TCCy DDW-MJG -0.00007 / ˚C 3 16/10/2015 V6.0 DOMINANT TM InGaN White: DDW-MJG Opto Technologies Innovating Illumination DDW, White Color Grouping For this color bin selection, part number will be DDW-MJG-W2X-1 Dominant White Bin Structure 0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.27 • • • A1 A2 0.28 • • • 0.29 A3 A4 0.30 • • • C1 C2 • • • 0.31 C3 C4 0.32 • • • 0.33 0.34 0.35 0.36 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. Bin A1 A2 A3 A4 C1 C2 C3 C4 0.2775 0.2900 0.2900 0.2775 Cy 0.2732 0.2939 0.3114 0.2907 Cx 0.2775 0.2900 0.2900 0.2775 Cy 0.2557 0.2764 0.2939 0.2732 Cx 0.2900 0.3025 0.3025 0.2900 Cy 0.2939 0.3146 0.3321 0.3114 Cx 0.2900 0.3025 0.3025 0.2900 Cy 0.2764 0.2971 0.3146 0.2939 Cx 0.3025 0.3150 0.3150 0.3025 Cy 0.3146 0.3354 0.3529 0.3321 Cx 0.3025 0.3150 0.3150 0.3025 Cy 0.2971 0.3179 0.3354 0.3146 Cx 0.3150 0.3275 0.3275 0.3150 Cy 0.3354 0.3561 0.3736 0.3529 Cx 0.3150 0.3275 0.3275 0.3150 Cy 0.3179 0.3386 0.3561 0.3354 Cx Dominant color coordinate is measured with an accuracy of ± 0.01. 4 16/10/2015 V6.0 DOMINANT TM InGaN White: DDW-MJG Opto Technologies Innovating Illumination DDW, White Color Grouping For this color bin selection, part number will be DDW-MJG-W2X-JKPL 4 0.3045 0.2715 0.3005 0.2825 0.3130 0.2840 0.3100 0.2970 0.3386 0.3235 0.3386 0.3426 0.3484 0.3388 0.3484 0.3571 0.3130 0.2840 0.3100 0.2970 0.3205 0.2956 0.3197 0.3131 0.3582 0.3542 0.3582 0.3715 White Bin Structure 1 0.2960 0.2590 0.291 0.2680 0.3045 0.2715 0.3005 0.2825 0.3288 0.3081 0.3288 0.3282 0.3386 0.3235 0.3386 0.3426 0.3100 0.2970 0.3070 0.3120 0.3197 0.3131 0.3189 0.3302 0.3484 0.3388 0.3484 0.3571 0.3900 0.3800 0.3700 PL 0.3600 OL 0.3500 NL 0.3400 0.3300 ML 0.3200 0.3100 OK NK MK LL 0.3000 PK LK KL 0.2900 KK JL 0.2800 0.2700 JK 0.2600 0.2500 0.2400 0.2300 0.2700 0.2800 0.2900 0.3000 0.3100 0.3200 0.3300 0.3400 0.3500 0.3600 0.3700 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. 1 2 3 4 Cx 0.2960 0.2910 0.3005 0.3045 Cy 0.2590 0.2680 0.2825 0.2715 Cx 0.291 0.2850 0.2960 0.3005 Cy 0.2680 0.2790 0.2955 0.2825 Cx 0.3045 0.3005 0.3100 0.3130 Cy 0.2715 0.2825 0.2970 0.2840 Cx 0.3005 0.2960 0.3070 0.3100 Cy 0.2825 0.2955 0.3120 0.2970 Cx 0.3288 0.3288 0.3386 0.3386 Cy 0.3081 0.3282 0.3426 0.3235 Cx 0.3288 0.3288 0.3386 0.3386 Cy 0.3282 0.3453 0.3591 0.3426 Cx 0.3386 0.3386 0.3484 0.3484 Cy 0.3235 0.3426 0.3571 0.3388 Cx 0.3386 0.3386 0.3484 0.3484 Cy 0.3426 0.3591 0.3730 0.3571 Cx 0.3100 0.3197 0.3205 0.3130 Cy 0.2970 0.3131 0.2956 0.2840 Cx 0.3070 0.3189 0.3197 0.3100 Cy 0.3120 0.3302 0.3131 0.2970 Bin JK JL KK KL NK NL OK OL LK LL 5 16/10/2015 V6.0 DOMINANT TM InGaN White: DDW-MJG Opto Technologies Innovating Illumination 1 2 3 4 Cx 0.3197 0.3288 0.3288 0.3205 Cy 0.3131 0.3282 0.3081 0.2956 Cx 0.3189 0.3288 0.3288 0.3197 Cy 0.3302 0.3452 0.3282 0.3131 Cx 0.3484 0.3484 0.3582 0.3582 Cy 0.3388 0.3571 0.3715 0.3542 Cx 0.3484 0.3484 0.3582 0.3582 Cy 0.3571 0.3730 0.3792 0.3715 Bin MK ML PK PL InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. 6 16/10/2015 V6.0 DOMINANT TM InGaN White: DDW-MJG Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group W2 1400.0 ... 1800.0 X1 1800.0 ... 2240.0 X2 2240.0 .... 2850.0 Luminous intensity is measured with an accuracy of ± 11%. Vf Binning (Optional) Vf Bin @ 20mA Group Forward Wavelength Voltage (V) distribution (nm) V1 2.70 ... 3.00 V2 3.00 ... 3.30 V3 3.30 ... 3.60 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Please consult sales and marketing for special part number to incorporate Vf binning. 7 16/10/2015 V6.0 DOMINANT TM InGaN White: DDW-MJG Opto Technologies Innovating Illumination Relative Intensity; Normalized at 20mA Relative Luminous Intensity Vs Forward Current Forward Current Vs Forward Voltage 2.2 50 2 40 Forward Current; mA 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 30 20 10 0.2 0 0 0 10 20 30 40 2 50 3.5 4 Forward Voltage; V Maximum Current Vs Ambient Temperature Relative Intensity Vs Wavelength Measurement Report 1 - 50 Date : Measurement Equipment Measurement condition Spectrometer : Power 40 Source : Temperature : Humidity : Instrument Systems CAS140B Keithley 2400 30 Data Measurement Unit 1 IF Device 20 DDW-MJG 10 0 0 Delta CX Delta CY CX CY Delta CX Delta CY CX 1.0 0.2847 0.2973 -0.0011 0.0103 0.2912 0.3146 -0.0009 0.0150 2.0 0.2852 0.2963 -0.0006 0.0093 0.2917 0.3112 -0.0004 3.0 0.2855 0.2952 -0.0003 0.0082 0.2922 0.3097 4.0 0.2858 0.2946 0.0000 0.0076 0.2923 5.0 0.2857 0.2936 -0.0001 0.0066 0.2925 10.0 0.2861 0.2911 0.0003 0.0041 15.0 0.2860 0.2887 0.0002 0.0017 40.0 0.2856 0.2846 -0.0002 -0.0024 0.2852 0.2816 -0.0006 -0.0054 Ambient 0.2853 0.2829Temperature -0.0005 -0.0041 50.0 Delta CX Delta CY 0.2805 0.2958 0.3 -0.0004 0.0171 -0.0008 0.0141 0.0116 0.2806 0.2913 -0.0003 0.0126 -0.0004 0.0112 0.0001 0.0101 0.2807 0.2892 -0.0002 0.0105 -0.0001 0.0096 0.3083 0.0002 0.0087 0.2811 0.2878 0.0001 0.0085 0.0004 0.0074 0.2811 0.2864 0.0002 0.1 0.0091 0.3070 0.0002 0.0072 0.2926 0.3038 0.0005 0.0042 0.2812 0.2829 0.00030 0.0077 0.0042 0.0004 0.0042 0.2924 0.3013 0.0003 0.0017 0.2812 0.2804 0.0003 0.0017 0.0003 0.0017 0.0000 0.0000 0.2809 0.2787 0.0000 -0.0003 -0.0023 0.2807 0.2763 -0.0002 -0.0024 -0.0002 -0.0024 0.2916 0.2958 -0.0005 -0.0038 0.2804 0.2746 -0.0005 -0.0041 -0.0005 -0.0040 0.2914 0.2946 -0.0007 -0.0050 0.2803 0.2734 -0.0006 -0.0053 -0.0006 -0.0052 Cx Delta CX Cy Cy Y Delta CY Cx -0.01 -0.02 -0.03 -0.02 -0.04 Summary Variables DDWͲMJG 0 -0.01 0 -0.03 5 10 0 15 2 20 4 25 6 30 8 Forward current (mA) 35 10 400 450 500 0.0000 0.0000 0.0000 0.2973 40 45 50 12 14 16 18 20 1000 Allowable Forward Current ( mA ) 0.01 0.00 0.0002 0.2918 0.02 0.01 0.2 Chromaticity Coordinate Shift ( Tj=25° C ) 0.02 Average 0.4 Delta CY Allowable Forward Current ( mA ) 0.03 0.5 Delta CX 0.03 0.04 0.6 CY Chromaticity Coordinate Shift 0.05 0.7 Unit 3 CY 30.0 -0.05 °C RH Unit 2 10 20.0 20 30 40 0.2870 50 60 70 0.0000 80 90 100 0.2996 110 0.2858 0.0000 0.2921 Chromacity Chart 0.8 25 <65% CX (mA) 0.9 13th June 2014 Relative Intensity Report No. Forward Current, mA 3 Forward Current, mA 60 ΔCCY ΔCX ȴCX,,ȴ 2.5 550 600 650 700 750 Wavelength; nm Allowable Forward Current Vs Duty Ratio Allowable Forward Current Vs Duty Ratio ( Ta=25 tp≤10uS ) ( Ta=25Deg Deg C,C, tp10uS ) 100 10 0.1 1 10 100 Duty Ratio, % Duty Ratio, % Forward current (mA) NA 8 16/10/2015 V6.0 DOMINANT TM InGaN White: DDW-MJG Opto Technologies Innovating Illumination Radiation Pattern 30° 20° 10° 0° 1.0 40° 0.8 50° 0.6 60° 0.4 70° 0.2 80° 90° 0 9 16/10/2015 V6.0 DOMINANT TM InGaN White: DDW-MJG Opto Technologies Innovating Illumination DomiLED •InGaN White: DDW-MJG Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Sn-Sn Plating 10 16/10/2015 V6.0 DOMINANT TM InGaN White: DDW-MJG Opto Technologies Innovating Illumination Recommended Solder Pad 11 16/10/2015 V6.0 DOMINANT TM InGaN White: DDW-MJG Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 12 16/10/2015 V6.0 DOMINANT TM InGaN White: DDW-MJG Opto Technologies Innovating Illumination Packaging Specification 13 16/10/2015 V6.0 DOMINANT TM InGaN White: DDW-MJG Opto Technologies Innovating Illumination Packaging Specification Existing BPL Moisture sensitivity level size - 87mm x 45mm. As part of improvement and also in response to customers’ request; BPL f Barcode label changed to the following. DOMINANT Opto Technologies (L) Lot No : lotno ML TEMP 2 260˚C RoHS Compliant (P) Part No : partno (C) Cust No : partno (Q) Quantity : quantity (G) Grouping : group (D) D/C : date code Made in Malaysia (S) S/N : serial no New BPL size - 110mm x 55mm. Additional information are now included in the label. 2D and 3D barc Reel implemented now for every data field. Label Moisture absorbent material + Moisture indicator Issue No : 1 The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Weight Weight(gram) (gram) Average 1pc DomiLED/Multi DomiLED 1 completed bag (2000pcs) 0.034 0.034 240 ± 10 190 10 Cardboard Box DOMINANT TM For DomiLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Super Small 325 x 225 x 190 0.38 9 reels MAX Small 325 x 225 x 280 0.54 15 reels MAX Medium 570 x 440 x 230 1.46 60 reels MAX Large 570 x 440 x 460 1.92 120 reels MAX 14 16/10/2015 V6.0 DOMINANT TM InGaN White: DDW-MJG Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 217˚C 225 Temperature (˚C) Ramp-up 3˚C/sec max. 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 15 16/10/2015 V6.0 DOMINANT TM InGaN White: DDW-MJG Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial release 03 Apr 2012 2 Update Power Dissipation 27 Nov 2012 2 Typo error in min Vf 28 May 2013 3 Add Characteristic 22 Jul 2013 8 Add Graph: Chromaticity Coordinate Shift Add Graph: Allowable Forward Current Vs Duty Ratio 04 Aug 2014 1, 14 Add Features Update Packaging Specification 16 Oct 2015 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 16 16/10/2015 V6.0 DOMINANT TM Opto Technologies InGaN White: DDW-MJG Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM