DOMINANT Opto Technologies Innovating Illumination TM DATA SHEET: SpicePlus2520 InGaN White : SQW-WHG SpicePlus Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size yet the SpicePlus packs a powerful performance and is a highly reliable design device. Features: > > > > > > > > Super high brightness surface mount LED automotive exterior applications. 120° viewing angle. Compact package outline (LxW) of 2.5 x 2.0mm. Ultra low height profile - 0.7mm. Low thermal resistance, RthJS; 10K/W. Superior corrosion robustness. White light conversion done with phosphor on chip level. Compatible to IR reflow soldering. Applications: > Automotive: Exterior application: eg: Signal Lighting, Center High Mounted Stop Light (CHMSL), Fog lamp, Rear Combination Lights (RCLs). > Industrial: white goods (eg: Oven, microwave, etc.). © 2005 SpiceLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 07/01/2015 V2.0 DOMINANT TM SpicePlus 2520 InGaN White : SQW-WHG Opto Technologies Innovating Illumination Electrical Characteristics at Tj=25˚C Part Ordering Number SQW-WHG-8V8W-1 Color Luminous Flux @ 500mA (lm) Min. Typ. Max. Viewing Angle˚ White 120 129.2 150.0 180.0 NOTE 1. All part number above comes in a quantity of 3000 units per reel. 2. Other luminious intensity groups are also available upon request 3. Luminous intensity is measured with an accuracy of ± 11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. Electrical Characteristics at Tj=25˚C Vf @ If = 500mA Part Number SQW-WHG Min. (V) Typ. (V) 3.0 3.3 Vr @ Ir = 10uA Min. (V) Max. (V) 3.8 5 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value DC forward current Unit 750 mA 5 V ESD threshold (HBM) 2000 V LED junction temperature 150 ˚C Operating temperature -40 … +125 ˚C Storage temperature -40 … +125 ˚C Reverse voltage; Ir max = 10µA Thermal resistance K/W - Junction / solder point, Rth JS (Mounting on DOMINANT standard PCB) 10 2 07/01/2015 V2.0 DOMINANT TM SpicePlus 2520 InGaN White : SQW-WHG Opto Technologies Innovating Illumination Characteristics Temperature coefficient of VF (typ) IF = 500mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of IV (typ) IF = 500mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of Cx (typ) IF = 500mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of Cy (typ) IF = 500mA; 0 ˚C <= T <= 100 ˚C Symbol Part Number Value Unit TCV SQW-WHG -4.4 mV / K TCIV SQW-WHG -0.22 %/K TCCx SQW-WHG -0.000003 /˚K TCCy SQW-WHG -0.000003 /˚K 3 07/01/2015 V2.0 DOMINANT TM SpicePlus 2520 InGaN White : SQW-WHG Opto Technologies Innovating Illumination Wavelength Grouping Dominant White Bin Structure 0.37 0.36 0.35 0.34 JN 0.33 IN 0.32 HN 0.31 0.30 0.30 0.31 0.32 0.33 0.34 0.35 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. Bin HN IN JN 1 2 3 Cx 0.3096 0.3127 4 0.3255 0.3246 Cy 0.3282 0.3093 0.3216 0.3424 Cx 0.3138 0.3163 0.3300 0.3298 Cy 0.3381 0.3181 0.3308 0.3526 Cx 0.3186 0.3203 0.3349 0.3355 Cy 0.3484 0.3274 0.3404 0.3633 Dominant color coordinate is measured with an accuracy of ± 0.01. 4 07/01/2015 V2.0 DOMINANT TM SpicePlus 2520 InGaN White : SQW-WHG Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Flux IV (lm) Brightness Group 8V 129.2 ... 138.4 9V 138.4 ... 147.7 6W 147.7 ... 157.8 7W 157.8 ... 168.0 8W 168.0 ... 180.0 Luminous intensity is measured with an accuracy of ± 11%. 5 07/01/2015 V2.0 DOMINANT TM SpicePlus 2520 InGaN White : SQW-WHG Opto Technologies Innovating Illumination 1.8 1.6 1.4 2.2 1.8 Col_5 Col_5 1.6 1.8 1.4 1.6 1.2 1.4 1 1.21 0.8 0.8 1 0.8 0.6 0.6 0.4 0.4 0.4 0.2 0.2 0.2 0 00 4 Variables Variabl 3.530 3.5 Col_7Col_ 325 3 2.5 2.5 20 2 2 15 1.5 1.5 10 1 1 0.5 5 0.5 00 0 0200 0 435 Variables Variables 2 1.2 0.6 Forward Current VsCurrent Forward Forward Current Vs Forward Voltage Forward Current Vs VF Forward Vs Voltage VF Forward ForwardCurrent; Current; mA mA Flux Intensity, Normalized at at 500mA Relative Intensity; Normalized 20mA Relative Intensity Vs Forward Current Flux Intensity Forward Current Flux Vs Forward Current Flux VsVs Forward Current 10 200 400 20 400 600 30 600 800 40800 1000 501000 0 00 2 600 6003 800 800 1000 4 1000 0 200 1200 400 400 Forward Voltage; Forward IFVoltage; (mA) V V IF (mA) Forward Current; Current; mA Forward mA IF(mA)IF(mA) Maximum Current Vs Solder Solder Point Temperature Maximum Current Vs Forward Current Maximum Current Vs Point Temperature 800 25 Variables 1 Col_2 700 0.9 0.8 20 600 Relative Intensity IF (mA) Forward Current; mA Relative Intensity Vs Wavelength 500 15 400 10 300 200 0.7 0.6 0.5 0.4 0.3 5 0.2 100 0.1 0 00 00 10 10 20 20 303040 40 50 70 60 807090 80 90 100 50 60 100110120130 400 450 500 550 600 650 700 750 Wavelength; nm Ambient Temperature Solder Point Temperature Col_1 Radiation Pattern 30° 20° 10° 0° 1.0 40° 0.8 50° 0.6 60° 0.4 70° 0.2 80° 90° 0 6 07/01/2015 V2.0 DOMINANT Opto Technologies DOMINANT Opto Technologies Innovating Illumination PRELIMINARY TM UNDER DEVELOPMENT SpicePlus 2520 InGaN White : SQW-WHG Engineering reference data are not verified. The specifications are subject to change without notice. SpicePlus 2520 InGaN White : SQW-WHG Package Outlines SpicePlus2520 500mA White: SQW-WHG General Tolerances ± 0.10 Super high brightness surface mount LED automotive exterior applications. 120 viewing angle. Material Compact package outline (LxW) of 2.5 x 2.0 mm. Ultra low height profile – 0.7 mm. Low thermal resistance, RthJS; 5 K/W. Superior corrosion robustness. High White light conversion done with phosphor onTemperature chip level. Resistant Silicone Package Compatible to IR reflow soldering. Lead-frame Encapsulant Soldering Leads Material Cu Alloy With Au Plating Silicone Resin Au Plating Note: product is Pb free 5/05/14 7 SpicePlus2520 500 InGaN White SQW-WHG -pv2.docx 07/01/2015 V2.0 Page 1 of 9 DOMINANT TM SpicePlus 2520 InGaN White : SQW-WHG Opto Technologies Innovating Illumination Recommended Solder Pad Recommended Solder Stencil Design 8 07/01/2015 V2.0 PRELIMINARY UNDER DEVELOPMENT DOMINANT Opto Technologies DOMINANT TM SpicePlus 2520 InGaN White : SQW-WHG Opto Technologies Engineering reference data are not verified. The specifications are subject to Innovating Illumination change without notice. Taping and orientation Taping And Orientation. • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 5/05/14 Reels come in quantity of 2000 units. Reel diameters are 180 mm. SpicePlus2520 500 InGaN White SQW-WHG -pv2.docx 9 Page 7 of 9 07/01/2015 V2.0 DOMINANT TM SpicePlus 2520 InGaN White : SQW-WHG Opto Technologies Innovating Illumination Packaging Specification 10 07/01/2015 V2.0 DOMINANT TM SpicePlus 2520 InGaN White : SQW-WHG Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc SpicePlus 1 completed bag (2000pcs) 0.011 0.034 150 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For SpiceLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 192,000 MAX 11 07/01/2015 V2.0 DOMINANT TM SpicePlus 2520 InGaN White : SQW-WHG Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 225 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 12 07/01/2015 V2.0 DOMINANT TM SpicePlus 2520 InGaN White : SQW-WHG Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 27 Nov 2014 8 Add Solder Stencil Design 07 Jan 2015 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologiess does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 13 07/01/2015 V2.0 DOMINANT TM Opto Technologies Innovating Illumination SpicePlus 2520 InGaN White : SQW-WHG About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM