DomiLED AlInGaP DDx-LJB - Catalogue-v1

DOMINANT
Opto Technologies
Innovating Illumination
DomiLED
TM
DATA SHEET:
DomiLEDTM
AlInGaP : DDx-LJB
TM
Synonymous with function and performance, the DomiLED series is
perfectly suited for a variety of cross-industrial applications due to its
small package outline, durability and superior brightness.
TM
Features:
> High brightness surface mount LED using thin film technology.
> 120° viewing angle.
>
>
>
>
Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm.
Qualified according to JEDEC moisture sensitivity Level 2.
Compatible to both IR reflow soldering.
Environmental friendly; RoHS compliance.
Applications:
> Signage: full colour display video notice board, signage, special effect
lighting.
> Industrial: white goods (eg: Oven, microwave, etc.), light bar,
illuminated advertising.
© 2005 DomiLED is a trademark of DOMINANT Opto Technologies.
All rights reserved. Product specifications are subject to change without notice.
1
26/11/2014 V1.0
DOMINANT
TM
AlInGaP : DDx-LJB
Opto Technologies
Innovating Illumination
Optical Characteristics at Tj=25˚C
Part Ordering
Number
DDY-LJB-VW2-1
Color
Viewing
Angle˚
Yellow, 587nm
Luminous Intensity @ IF = 20mA IV (mcd)
Min.
Typ.
Max.
120
715.0
1125.0
1800.0
NOTE
1. All part number above comes in a quantity of 2000 units per reel.
2. Luminous intensity is measured with an accuracy of ± 11%.
3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel.
4. An optional Vf bining is also available upon request. Bining scheme is as per following table.
Electrical Characteristics at Tj=25˚C
Part Number
DDx-LJB
Vf @ If = 20mA
Min. (V)
1.8
Vr @ Ir = 10uA
Typ. (V)
Max. (V)
2.1
2.6
Min. (V)
5
Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V.
Absolute Maximum Ratings
Maximum Value
Unit
DC forward current
30
mA
Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.10)
80
mA
Reverse voltage
5
V
ESD threshold (HBM)
2
kV
120
˚C
Operating temperature
-40 … +100
˚C
Storage temperature
-40 … +100
˚C
80
mW
500
K/W
280
K/W
LED junction temperature
Power dissipation (at room temperature)
Thermal resistance
- Junction / ambient, Rth JA
- Junction / solder point, Rth JS
(Mounting on FR4 PCB, pad size >= 16 mm2 per pad)
2
26/11/2014 V1.0
DOMINANT
TM
Opto Technologies
AlInGaP : DDx-LJB
Innovating Illumination
Wavelength Grouping at Tj=25˚C
Color
DDY; Yellow
Group
Wavelength distribution (nm)
Full
582 - 594
W
582 - 585
X
585 - 588
Y
588 - 591
Z
591 - 594
Dominant wavelength is measured with an accuracy of ± 1 nm.
3
26/11/2014 V1.0
DOMINANT
TM
AlInGaP : DDx-LJB
Opto Technologies
Innovating Illumination
Luminous Intensity Group at Tj=25˚C
Luminous Intensity
IV (mcd)
Brightness Group
V1
715.0 ... 900.0
V2
900.0 ... 1125.0
W1
1125.0 ... 1400.0
W2
1400.0 ... 1800.0
Luminous intensity is measured with an accuracy of ± 11%.
4
26/11/2014 V1.0
DOMINANT
TM
AlInGaP : DDx-LJB
Opto Technologies
Innovating Illumination
Forward
Voltage
Vs Forward
Current
Forward
Current
Vs Forward
Voltage
Forward
Voltage
Vs
Current
Forward
Voltage
Vs Forward
Forward
Current
3.5
2.2
3
3.5
2.83.5 30
3.5
Variables
Variables
2
33
2.5
1.8
Col_2
Col_2
1.6
2.5
2.5
2
1.4
2
2
1.2
1.5
1.51
1.5
0.8
1
11
0.6
0.4
0.5
0.5
0.5
0.2
0
0 00
3
3
Forward Voltage, V
RelativeNormalized
Intensity at 20mA
Relative Intensity;
Relative
Intensity
Forward
Current
Relative
Luminous
Intensity
VsCurrent
Forward
Relative
Intensity
Vs
Forward
CurrentCurrent
Relative
Intensity
VsVs
Forward
2.5 2.5
2.4
Col_4
25
20
2
2
1.5 1.5
1
Va
Variables
2
1
15
10
5
0.5 0.5
0
0 00
20 20
10
20
10
20
40
30
4030
0 0
1.6
0
60
80
60
4040
5050 806060
0 10
20
1.2 20
20 1.4
30 1.6
40
40
00
Relative
Intensity
Vs Wavelength
Relative
Intensity
Vs Wavelength
Maximum
Current
Vs Temperature
Forward
Current
Vs Ambient
Temperature
35
60
30
ForwardCurrent;
Current, mA
Forward
mA
50
Relative Intensity
25
40
20
30
15
20
10
105
00
1
1
0.9
0.9
0.8
0.8
0.7
0.7
0.6
0.6
0.5
0.5
0.4
0.4
0.3
0.3
0.2
0.2
0.1
0.1
0
0
10 20
20 30
30 40
40 50
50 6060 7070 8080 9090100
100
10
400
500
450
500
550 600
600
650
700700750
Wavelength,
nm
Wavelength;
nm
AmbientTemperature
Temperature
Ambient
DDx-LJB _ 011214
Allowable Forward Current Vs Duty Ratio
Allowable
Forward
Current
Vs Duty
Ratio
(Ta=
Maximum
Pulse
Current
VsVs
Duty
Cycle
Allowable
Forward
Current
Duty
Ratio25 Deg C)
( Ta=25 Deg C, tp”10uS )
Radiation Pattern
1000
30°
Maximum Pulse Current; mA
Allowable
Forward Current
( mA () mA )
Allowable
Forward
Current
10000
1000
20°
10°
0°
1.0
40°
0.8
1000
100
100
100
50°
0.6
60°
0.4
70°
10
10
10
0.2
80°
0.1
11
1
1010
Duty
Ratio, %
Duty Ratio, %
10
2.6
Col_3
Forward
Voltage, V
ForwardCol_3
Current,
mA
ForwardCurrent;
Current,mA
mA
Forward
00
40
1.8 60602 7060 2.2
50
80 80 2.480
100
100
100
90°
0
%
DutyDuty
(%); Ratio,
Tp<=10us
5
26/11/2014 V1.0
800
DOMINANT
TM
AlInGaP : DDx-LJB
Opto Technologies
Innovating Illumination
DomiLED • AlInGaP : DDx-LJB Package Outlines
TM
Material
Material
Lead-frame
Cu Alloy With Ag Plating
Package
High Temperature Resistant Plastic, PPA
Encapsulant
Epoxy
Soldering Leads
Sn-Sn Plating
6
26/11/2014 V1.0
DOMINANT
TM
AlInGaP : DDx-LJB
Opto Technologies
Innovating Illumination
Recommended Solder Pad
7
26/11/2014 V1.0
DOMINANT
TM
AlInGaP : DDx-LJB
Opto Technologies
Innovating Illumination
Taping and orientation
• Reels come in quantity of 2000 units.
• Reel diameter is 180 mm.
8
26/11/2014 V1.0
DOMINANT
TM
AlInGaP : DDx-LJB
Opto Technologies
Innovating Illumination
Packaging Specification
9
26/11/2014 V1.0
DOMINANT
TM
AlInGaP : DDx-LJB
Opto Technologies
Innovating Illumination
Packaging Specification
Moisture sensitivity level
Barcode label
DOMINANT
ROHS Compliant
LOT NO : lotno
PB Free
PART NO : partno
QTY : product quantity per reel S/N : serial no D/C: date code
GROUP : group
Reel
Label
Moisture absorbent material +
Moisture indicator
The reel, moisture absorbent material and moisture indicator are
sealed inside the moisture proof foil bag
Average 1pc DomiLED/Multi DomiLED
1 completed bag (2000pcs)
0.034
0.034
190 ± 10
190
10
Weight
Weight(gram)
(gram)
Cardboard
Box
DOMINANT TM
For DomiLED
TM
Cardboard Box
Size
Dimensions (mm)
Empty Box
Weight (kg)
Reel / Box
Quantity / Box (pcs)
Small
300 x 250 x 250
0.58
15 reels MAX
30,000 MAX
Large
416 x 516 x 476
1.74
96 reels MAX
192,000 MAX
10
26/11/2014 V1.0
DOMINANT
TM
AlInGaP : DDx-LJB
Opto Technologies
Innovating Illumination
Recommended Pb-free Soldering Profile
Classification Reflow Profile (JEDEC J-STD-020C)
300
255-260˚C
10-30s
275
250
225
Temperature (˚C)
Ramp-up
3˚C/sec max.
217˚C
200
60-150s
175
150
125
Rampdown
6˚C/sec
max.
100
75
Preheat 60-180s
50
25
480s max
0
50
100
150
200
Time (sec)
11
26/11/2014 V1.0
DOMINANT
TM
AlInGaP : DDx-LJB
Opto Technologies
Innovating Illumination
Revision History
Page
Subjects
Date of Modification
-
Initial Release
26 Nov 2014
NOTE
All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT
Opto Technologies does not assume any liability arising out of the application or use of any product described herein.
DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function
or design.
DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems
without the express written approval from the Managing Director of DOMINANT Opto Technologies.
12
26/11/2014 V1.0
DOMINANT
TM
Opto Technologies
AlInGaP : DDx-LJB
Innovating Illumination
About Us
DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED
Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries
and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs
are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art
manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More
information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com.
Please contact us for more information:
DOMINANT Opto Technologies Sdn. Bhd.
Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia
Tel: (606) 283 3566 Fax: (606) 283 0566
E-mail: [email protected]
DOMINANT
Opto Technologies
Innovating Illumination
TM