Download this Data sheet

147 MHz SAW Filter
8 MHz Bandwidth
Part Number: SF0147BA02468S
DESCRIPTION
•
•
•
147 MHz SAW bandpass filter with 8 MHz bandwidth.
9 x 7 mm ceramic LCC.
RoHS compliant.
TYPICAL PERFORMANCE
Horizontal:
Vertical from Top:
S11 (97-197 MHz)
Frequency :
Relative Magnitude :
Relative Magnitude :
20
10
1
MHz/div
dB/div
dB/div
S22 (97-197 MHz)
Spectrum Microwave
400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401
www.SpectrumMicrowave.com
DSSF0147BA02468S Rev A
ECN 36650
11-Mar-2010
Page 1 of 3
147 MHz SAW Filter
8 MHz Bandwidth
Part Number: SF0147BA02468S
SPECIFICATION
Parameter
Center Frequency, FC 1
Insertion Loss
Lower 3 dB Band Edge 2
Upper 3 dB Band Edge 2
Amplitude Ripple (143 to 151 MHz)
Absolute Attenuation (47 to 108.2 MHz) 2
Absolute Attenuation (185.8 to 247 MHz) 2
Absolute Attenuation (247 to 367.5 MHz) 2
Input and Output Return Loss
Temperature Coefficient
Source/Load Impedance
Ambient Temperature
Notes:
Min
151
50
50
40
-
Typ
147
3.2
142
152
2.5
55
55
45
6
-80
50
25
Max
5
143
3.0
-
Units
MHz
dB
MHz
MHz
dB p-p
dB
dB
dB
dB
ppm/˚C
Ω
˚C
1. Defined as the average of the lower and upper 3 dB frequencies at room ambient.
2. All dB levels are defined relative to the insertion loss.
MAXIMUM RATINGS
Parameter
Storage Temperature Range
Operating Temperature Range
Input Power Level
Min
Max
-40
0
-
85
50
15
Units
˚C
˚C
dBm
MATCHING CIRCUIT
3
8
Input
50 Ω
Single-ended
Output
50 Ω
Single-ended
GND
All others
GND
Note: Matching components are not required.
Spectrum Microwave
400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401
www.SpectrumMicrowave.com
DSSF0147BA02468S Rev A
ECN 36650
11-Mar-2010
Page 2 of 3
147 MHz SAW Filter
8 MHz Bandwidth
Part Number: SF0147BA02468S
PACKAGE OUTLINE
SUGGESTED FOOTPRINT
Units: mm
Tolerances are ±0.15 mm except
where indicated.
Pad Configuration:
Input:
3
Output:
8
Ground:
all other pads
Package Material:
Body: Al2O3 ceramic
Lid: Kovar, Ni plated
Terminations: Au plating 1 µm min,
over a 1.3-8.9 µm Ni plating
ISO 9001
Registered
All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice.
© 2010 All rights reserved.
Spectrum Microwave
400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401
www.SpectrumMicrowave.com
DSSF0147BA02468S Rev A
ECN 36650
11-Mar-2010
Page 3 of 3