20131205080053 6029

Test Report.
No. CANEC1217306202
Date: 21 Dec 2012.
Page 1 of 8.
WINSEMI MICROELECTRONICS COMPANY LIMITED.
ROOM 1002,EAST II,HIGH TEACH PLAZA,TIAN AN CYBERPARK,CHEGONGMIAO,SHENZHEN
CHINA.
.
The following sample(s) was/were submitted and identified on behalf of the clients as : IC.
SGS Job No. :
CP12-059280 - SZ.
Tested Sample Info. :.
SOP-8.
Main Substance :.
Si,Al,P,B.
Client Ref. Info. :.
SOP-8/SOT-23-6/SOT-23/DIP-8/SOT89-5.
Supplier :.
WINSEMI.
Date of Sample Received :.
17 Dec 2012.
Testing Period :.
17 Dec 2012 - 21 Dec 2012.
Test Requested :.
Selected test(s) as requested by client..
Test Method :.
Please refer to next page(s)..
Test Results :.
Please refer to next page(s)..
Conclusion :.
A:Based on the performed tests on selected part of submitted sample(s), the
results of Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated
biphenyls (PBB), Polybrominated diphenyl ethers (PBDE) comply with the limits
in RoHS Directive 2011/65/EU Annex II; recasting 2002/95/EC..
Signed for and on behalf of
SGS-CSTC Ltd..
Almay Gao.
Approved Signatory.
Test Report.
No. CANEC1217306202
Date: 21 Dec 2012.
Page 2 of 8.
Test Results :.
Test Part Description :.
Specimen No..
1.
SGS Sample ID.
CAN12-173062.002
Description.
Sliver-white plated metal pin.
2.
CAN12-173062.003
Black plastic w/ silvery chip.
Remarks :.
(1) 1 mg/kg = 1 ppm = 0.0001%.
(2) MDL = Method Detection Limit.
(3) ND = Not Detected ( < MDL ).
(4) "-" = Not Regulated.
A:RoHS Directive 2011/65/EU.
Test Method :. With reference to IEC 62321:2008
(1) Determination of Cadmium by ICP-OES.
(2) Determination of Lead by ICP-OES.
(3) Determination of Mercury by ICP-OES.
(4) Determination of Hexavalent Chromium by Colorimetric Method using UV-Vis.
(5) Determination of PBBs / PBDEs content by GC-MS..
Test Item(s).
Cadmium (Cd).
Limit.
Unit.
MDL.
003.
100
mg/kg.
2
ND
Lead (Pb).
1,000
mg/kg.
2
ND
Mercury (Hg).
1,000
mg/kg.
2
ND
Hexavalent Chromium (CrVI).
1,000
mg/kg.
2
ND
Sum of PBBs.
1,000
mg/kg.
-
ND
Monobromobiphenyl.
-
mg/kg.
5
ND
Dibromobiphenyl.
-
mg/kg.
5
ND
Tribromobiphenyl.
-
mg/kg.
5
ND
Tetrabromobiphenyl.
-
mg/kg.
5
ND
Pentabromobiphenyl.
-
mg/kg.
5
ND
Hexabromobiphenyl.
-
mg/kg.
5
ND
Heptabromobiphenyl.
-
mg/kg.
5
ND
Octabromobiphenyl.
-
mg/kg.
5
ND
Nonabromobiphenyl.
-
mg/kg.
5
ND
Decabromobiphenyl.
-
mg/kg.
5
ND
1,000
mg/kg.
-
ND
Sum of PBDEs.
Test Report.
No. CANEC1217306202
Date: 21 Dec 2012.
Limit.
Unit.
MDL.
003.
Monobromodiphenyl ether.
-
mg/kg.
5
ND
Dibromodiphenyl ether.
-
mg/kg.
5
ND
Tribromodiphenyl ether.
-
mg/kg.
5
ND
Tetrabromodiphenyl ether.
-
mg/kg.
5
ND
Pentabromodiphenyl ether.
-
mg/kg.
5
ND
Hexabromodiphenyl ether.
-
mg/kg.
5
ND
Heptabromodiphenyl ether.
-
mg/kg.
5
ND
Octabromodiphenyl ether.
-
mg/kg.
5
ND
Nonabromodiphenyl ether.
-
mg/kg.
5
ND
Decabromodiphenyl ether.
-
mg/kg.
5
ND
Test Item(s).
Page 3 of 8.
Notes :.
(1) The maximum permissible limit is quoted from directive 2011/65/EU, Annex II.
A:RoHS Directive 2011/65/EU.
Test Method :. With reference to IEC 62321:2008
(1) Determination of Cadmium by ICP-OES.
(2) Determination of Lead by ICP-OES.
(3) Determination of Mercury by ICP-OES.
(4) Determination of Hexavalent Chromium by Spot test / Colorimetric Method using UV-Vis..
Test Item(s).
Limit.
Unit.
MDL.
002.
Cadmium (Cd).
100
mg/kg.
2
ND
Lead (Pb).
1,000
mg/kg.
2
19
Mercury (Hg).
1,000
mg/kg.
2
ND
-
-
♢
Negative
Hexavalent Chromium (CrVI).
Notes :.
(1) The maximum permissible limit is quoted from the directive 2011/65/EU, Annex II
(2)◇Spot-test:
Negative = Absence of CrVI coating, Positive = Presence of CrVI coating;
(The tested sample should be further verified by boiling-water-extraction method if the spot test result is
Negative or cannot be confirmed.)
◇Boiling-water-extraction:
Negative = Absence of CrVI coating
Positive = Presence of CrVI coating; the detected concentration in boiling-water-extraction solution is
equal or greater than 0.02 mg/kg with 50 cm2 sample surface area.
For corrosion protection coatings on metals: Information on storage conditions and production date of the
tested sample is unavailable and thus results of Cr(VI) represent status of the sample at the time of
Test Report.
No. CANEC1217306202
Date: 21 Dec 2012.
Page 4 of 8.
testing..
B:Hexabromocyclododecane (HBCDD).
Test Method :. Determination of HBCDD by GC-MS based on IEC 62321:2008..
Test Item(s).
Unit.
Hexabromocyclododecane (HBCDD).
mg/kg.
MDL.
003.
10
ND
Notes :.
(1) Reference Information: Directive 2011/65/EU recasting RoHS directive 2002/95/EC:
Hexabromocyclododecane (HBCDD) is considered as a priority for risk evaluation and substance restriction..
C:Phthalate.
Test Method :. Determination of phthalates by GC-MS based on EN 14372:2004..
Test Item(s).
Dibutyl Phthalate (DBP).
Benzylbutyl Phthalate (BBP).
Bis-(2-ethylhexyl) Phthalate (DEHP).
Unit.
MDL.
003.
% (w/w).
% (w/w).
% (w/w).
0.003
0.003
0.003
ND
ND
ND
Notes :.
(1) Reference Information: Directive 2011/65/EU recasting RoHS directive 2002/95/EC:
Bis (2-ethylhexyl) phthalate (DEHP), Butyl benzyl phthalate (BBP) and Dibutyl phthalate (DBP) are considered as a priority for risk evaluation and substance restriction..
Test Report.
No. CANEC1217306202
Date: 21 Dec 2012.
Page 5 of 8.
ATTACHMENTS
RoHS Testing Flow Chart
1) Name of the person who made testing: Michael Tso / Cutey Yu
2) Name of the person in charge of testing: Adams Yu / Yolanda Wei
3) These samples were dissolved totally by pre-conditioning method according to below flow chart
(Cr6+ and PBBs/PBDEs test method excluded).
Sample Preparation
Sample Measurement
Pb/Cd/Hg
Acid digestion with
microwave/ hotplate
Sample solvent
extraction
Filtration
Concentration/
Dilution of extraction
solution
Solution
Residue
Filtration
1) Alkali Fusion /
Dry Ashing
2)
Acid
to
dissolve
ICP-OES/AAS
DATA
Cr6+
PBBs/PBDEs
GC-MS
DATA
Nonmetallic
material
Metallic
material
Adding digestion Positive
Spot test
reagent
Heating to
90~95℃ for
extraction
Filtration and
pH adjustment
Adding
1,5diphenylcarbazide
for
color
development
UV-Vis
DATA
Negative
Boiling water
extraction
Adding
1,5diphenylcarbazide
for
color
development
A
red
color
indicates
the
presence of Cr6+.
If
necessary,
confirm
with
UV-Vis.
DATA
Test Report.
No. CANEC1217306202
ATTACHMENTS
HBCDD Testing Flow Chart
1) Name of the person who made testing: Cutey Yu
2) Name of the person in charge of testing: Yolanda Wei
Sample cutting / preparation
Sample Measurement
Solvent extraction
Concentration/Dilution
Filtration
GC-MS
DATA
Date: 21 Dec 2012.
Page 6 of 8.
Test Report.
No. CANEC1217306202
ATTACHMENTS
Phthalates Testing Flow Chart
1) Name of the person who made testing: Liu Qiong
2) Name of the person in charge of testing: Yolanda Wei
Sample cutting / preparation
Sample Measurement
Solvent extraction
Concentration/Dilution
Filtration
GC-MS
DATA
Date: 21 Dec 2012.
Page 7 of 8.
Test Report.
No. CANEC1217306202
Date: 21 Dec 2012.
Sample photo:.
CANEC1217306202
CAN12-173062.002.
CANEC1217306202
CAN12-173062.003.
SGS authenticate the photo on original report only.
*** End of Report ***.
Page 8 of 8.