20131205080328 1411

Test Report.
No. CANEC1305766701
Date: 28 Apr 2013.
Page 1 of 9.
WINSEMI MICROELECTRONICS COMPANY LIMITED.
ROOM 1002,EAST II,HIGH TEACH PLAZA,TIAN AN CYBERPARK,CHEGONGMIAO,SHENZHEN
CHINA.
.
The following sample(s) was/were submitted and identified on behalf of the clients as : TO-220.
SGS Job No. :
CP13-019723 - SZ.
Tested Sample Info. :.
TO-220.
Client Ref. Info. :.
TO-92/TO-220F/TO-126/AB/TO-251/TO-252/IPAK/DPAK/TO-277/SOT-223/.
SOT-89.
Main Substance :.
Si, Cu, Sn, Al, Ag, Epoxy Resin.
Date of Sample Received :.
23 Apr 2013.
Testing Period :.
23 Apr 2013 - 28 Apr 2013.
Test Requested :.
Selected test(s) as requested by client..
Test Method :.
Please refer to next page(s)..
Test Results :.
Please refer to next page(s)..
Conclusion :.
Based on the performed tests on submitted samples, the results of Lead,
Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB),
Polybrominated diphenyl ethers (PBDE) comply with the limits as set by RoHS
Directive 2011/65/EU Annex II; recasting 2002/95/EC..
Signed for and on behalf of
SGS-CSTC Ltd..
Merry Lv.
Approved Signatory.
Test Report.
No. CANEC1305766701
Date: 28 Apr 2013.
Page 2 of 9.
Test Results :.
Test Part Description :.
Specimen
No..
1.
2.
3.
SGS Sample ID.
CAN13-057667.001
CAN13-057667.002
CAN13-057667.003
Description.
Silvery metal pin.
Silvery metal sheet (without chip).
Black plastic w/ black printing & chip.
Remarks :.
(1) 1 mg/kg = 1 ppm = 0.0001%.
(2) MDL = Method Detection Limit.
(3) ND = Not Detected ( < MDL ).
(4) "-" = Not Regulated.
RoHS Directive 2011/65/EU.
Test Method :. With reference to IEC 62321:2008
(1) Determination of Cadmium by ICP-OES.
(2) Determination of Lead by ICP-OES.
(3) Determination of Mercury by ICP-OES.
(4) Determination of Hexavalent Chromium by Colorimetric Method using UV-Vis.
(5) Determination of PBBs / PBDEs content by GC-MS..
Test Item(s).
Cadmium (Cd).
Limit.
Unit.
MDL.
003.
100
mg/kg.
2
ND
Lead (Pb).
1,000
mg/kg.
2
7
Mercury (Hg).
1,000
mg/kg.
2
ND
Hexavalent Chromium (CrVI).
1,000
mg/kg.
2
ND
Sum of PBBs.
1,000
mg/kg.
-
ND
Monobromobiphenyl.
-
mg/kg.
5
ND
Dibromobiphenyl.
-
mg/kg.
5
ND
Tribromobiphenyl.
-
mg/kg.
5
ND
Tetrabromobiphenyl.
-
mg/kg.
5
ND
Pentabromobiphenyl.
-
mg/kg.
5
ND
Hexabromobiphenyl.
-
mg/kg.
5
ND
Heptabromobiphenyl.
-
mg/kg.
5
ND
Octabromobiphenyl.
-
mg/kg.
5
ND
Nonabromobiphenyl.
-
mg/kg.
5
ND
Test Report.
Test Item(s).
Decabromobiphenyl.
Sum of PBDEs.
No. CANEC1305766701
Date: 28 Apr 2013.
Limit.
Unit.
MDL.
003.
-
mg/kg.
5
ND
1,000
mg/kg.
-
ND
Monobromodiphenyl ether.
-
mg/kg.
5
ND
Dibromodiphenyl ether.
-
mg/kg.
5
ND
Tribromodiphenyl ether.
-
mg/kg.
5
ND
Tetrabromodiphenyl ether.
-
mg/kg.
5
ND
Pentabromodiphenyl ether.
-
mg/kg.
5
ND
Hexabromodiphenyl ether.
-
mg/kg.
5
ND
Heptabromodiphenyl ether.
-
mg/kg.
5
ND
Octabromodiphenyl ether.
-
mg/kg.
5
ND
Nonabromodiphenyl ether.
-
mg/kg.
5
ND
Decabromodiphenyl ether.
-
mg/kg.
5
ND
Page 3 of 9.
Notes :.
(1) The maximum permissible limit is quoted from the directive 2011/65/EU, Annex II..
RoHS Directive 2011/65/EU.
Test Method :. With reference to IEC 62321:2008
(1) Determination of Cadmium by ICP-OES.
(2) Determination of Lead by ICP-OES.
(3) Determination of Mercury by ICP-OES.
(4) Determination of Hexavalent Chromium by Spot test / Colorimetric Method using UV-Vis..
Test Item(s).
Cadmium (Cd).
Limit.
Unit.
MDL.
001.
002.
100
mg/kg.
2
ND
ND
Lead (Pb).
1,000
mg/kg.
2
13
8
Mercury (Hg).
1,000
mg/kg.
2
ND
ND
-
-
♢
Negative
Negative
Hexavalent Chromium (CrVI).
Notes :.
(1) The maximum permissible limit is quoted from the directive 2011/65/EU, Annex II
(2)◇Spot-test:
Negative = Absence of CrVI coating, Positive = Presence of CrVI coating;
(The tested sample should be further verified by boiling-water-extraction method if the spot test result is
Negative or cannot be confirmed.)
◇Boiling-water-extraction:
Negative = Absence of CrVI coating
Positive = Presence of CrVI coating; the detected concentration in boiling-water-extraction solution is equal
or greater than 0.02 mg/kg with 50 cm2 sample surface area.
Test Report.
No. CANEC1305766701
Date: 28 Apr 2013.
Page 4 of 9.
Information on storage conditions and production date of the tested sample is unavailable and thus results
of Cr(VI) represent status of the sample at the time of testing..
Hexabromocyclododecane (HBCDD).
Test Method :. Determination of HBCDD by GC-MS based on IEC 62321:2008..
Test Item(s).
Unit.
Hexabromocyclododecane (HBCDD).
mg/kg.
MDL.
003.
10
ND
Notes :.
(1) Reference Information: Directive 2011/65/EU recasting RoHS directive 2002/95/EC:
Hexabromocyclododecane (HBCDD) is considered as a priority for risk evaluation and substance restriction..
Phthalate.
Test Method :. Determination of phthalates by GC-MS based on EN 14372:2004..
Test Item(s).
Dibutyl Phthalate (DBP).
Benzylbutyl Phthalate (BBP).
Bis-(2-ethylhexyl) Phthalate (DEHP).
Unit.
MDL.
003.
% (w/w).
% (w/w).
% (w/w).
0.003
0.003
0.003
ND
ND
ND
Notes :.
(1) Reference Information: Directive 2011/65/EU recasting RoHS directive 2002/95/EC:
Bis (2-ethylhexyl) phthalate (DEHP), Butyl benzyl phthalate (BBP) and Dibutyl phthalate (DBP) are considered as a priority for risk evaluation and substance restriction..
Test Report.
No. CANEC1305766701
Date: 28 Apr 2013.
Page 5 of 9.
ATTACHMENTS
RoHS Testing Flow Chart
1) Name of the person who made testing: Michael Tso / Cutey Yu
2) Name of the person in charge of testing: Adams Yu / Yolanda Wei
3) These samples were dissolved totally by pre-conditioning method according to below flow chart
(Cr6+ and PBBs/PBDEs test method excluded).
Sample Preparation
Sample Measurement
Pb/Cd/Hg
Acid digestion with
microwave/ hotplate
Sample solvent
extraction
Filtration
Concentration/
Dilution of extraction
solution
Solution
Residue
Filtration
1) Alkali Fusion /
Dry Ashing
2) Acid to
dissolve
ICP-OES/AAS
DATA
Cr6+
PBBs/PBDEs
GC-MS
DATA
Nonmetallic
material
Adding digestion
reagent
Heating to
90~95℃ for
extraction
Filtration and
pH adjustment
Adding 1,5diphenylcarbazide
for color
development
Metallic
material
Positive
Spot test
Negative
Boiling water
extraction
Adding 1,5diphenylcarbazide
for color
development
UV-Vis
A red color
indicates the
presence of Cr6+. If
necessary, confirm
with UV-Vis.
DATA
DATA
Test Report.
No. CANEC1305766701
ATTACHMENTS
Phthalates Testing Flow Chart
1) Name of the person who made testing: Liu Qiong
2) Name of the person in charge of testing: Yolanda Wei
Sample cutting / preparation
Sample Measurement
Solvent extraction
Concentration/Dilution
Filtration
GC-MS
DATA
Date: 28 Apr 2013.
Page 6 of 9.
Test Report.
No. CANEC1305766701
ATTACHMENTS
HBCDD Testing Flow Chart
1) Name of the person who made testing: Cutey Yu
2) Name of the person in charge of testing: Yolanda Wei
Sample cutting / preparation
Sample Measurement
Solvent extraction
Concentration/Dilution
Filtration
GC-MS
DATA
Date: 28 Apr 2013.
Page 7 of 9.
Test Report.
No. CANEC1305766701
Sample photo:.
CANEC1305766701
CAN13-057667.001.
CANEC1305766701
CAN13-057667.002.
Date: 28 Apr 2013.
Page 8 of 9.
Test Report.
No. CANEC1305766701
Date: 28 Apr 2013.
CANEC1305766701
CAN13-057667.003.
SGS authenticate the photo on original report only.
*** End of Report ***.
Page 9 of 9.