VERIFICATION OF COMPLIANCE This Verification of Compliance is hereby issued to the product designated below. Product AC/DC Power Module Model AYM Series Data Applies To AYM-60S051; AYM-60S051C; AYM-60S12; AYM-60S12C; AYM60S15; AYM-60S15C; AYM-60S24; AYM-60S24C; AYM-60S48; AYM-60S48C Brand Applicant MINMAX TECHNOLOGY CO., LTD. No. 18, Sin-Sin Road, An-Ping Industrial District, Tainan, 702 Taiwan Manufacturer MINMAX TECHNOLOGY CO., LTD. No. 18, Sin-Sin Road, An-Ping Industrial District, Tainan, 702 Taiwan Applicable Standard(s) EN 61000-6-4: 2007+A1: 2011 EN 55011: 2009+A1: 2010 EN 61000-3-2: 2006+A2: 2009 EN 61000-3-3: 2008 EN 61000-6-2: 2005 IEC 61000-4-2: 2008; IEC 61000-4-3: 2010; IEC 61000-4-4: 2012; IEC 61000-4-5: 2005; IEC 61000-4-6: 2008; IEC 61000-4-8: 2009; IEC 61000-4-11:2004 Reference No. T121030N01-E Test Laboratory Compliance Certification Services Inc. (Tainan Lab.) No.8,Jiucengling, Xinhua Dist., Tainan City 712, Taiwan (R.O.C.) This device has been tested and found to comply with the stated standard(s), which is(are) required by the Council Medical Directive & Electromagnetic Compatibility Directive (93/42/EEC ; 2004/108/EC ). The test results are indicated in the test report aneport. Jeter Wu / Assistant Manager Tainan Lab. Date: November 14, 2013 EC-Declaration of Conformity The following equipment: AC/DC Power Module ( Product Name ) AYM Series; AYM-60S051; AYM-60S051C; AYM-60S12; AYM-60S12C; AYM60S15; AYM-60S15C; AYM-60S24; AYM-60S24C; AYM-60S48; AYM-60S48C / ( Model Designation / Brand Name ) MINMAX TECHNOLOGY CO., LTD. ( Manufacturer Name ) No. 18, Sin-Sin Road, An-Ping Industrial District, Tainan, 702 Taiwan ( Manufacturer Address ) is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Medical Directive & Electromagnetic Compatibility Directive (93/42/EEC ; 2004/108/EC, Amended by 92/31/EEC, 2006/95/EC & 98/13/EC ), For the evaluation regarding the Electromagnetic Compatibility (93/42/EEC ; 2004/108/EC, Amended by 92/31/EEC, 2006/95/EC & 98/13/EC), the following standards are applied: EN 61000-6-4: 2007+A1: 2011 EN 55011: 2009+A1: 2010 EN 61000-3-2: 2006+A2: 2009 EN 61000-3-3: 2008 EN 61000-6-2: 2005 IEC 61000-4-2: 2008; IEC 61000-4-3: 2010; IEC 61000-4-4: 2012; IEC 61000-4-5: 2005; IEC 61000-4-6: 2008; IEC 61000-4-8: 2009; IEC 61000-4-11:2004 The following manufacturer / importer or authorized representative established within the EUT is responsible for this declaration: ( Company Name ) ( Company Address ) Person responsible for making this declaration: ( Name, Surname ) ( Position / Title ) ( Place ) ( Date ) ( Legal Signature )