8 7 6 5 4 3 2 1 REVISIONS VICOR CONFIDENTIAL THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF VICOR CORP. REV 1 F .15[3.8] X45° CHAMFER .300±.015 7.62±.38 2.000 50.80 E 7X 1.735±.010 44.06±.25 .23 REF. 5.9 .080±.001 2.03±.03 KUK F 3 6 x #30 DRILL THRU ( .1285) 3.264 E 6X #4-40 UNC-2B TAP THRU 2X .38 9.6 .500 12.70 2 AR 01/11/11 RELEASE PER E110024a 4X ONE IN EACH CORNER (RESERVED FOR VICOR ACCESSORIES) .010 [0.254] DIM T 1 APPROVED DIMENSION T SLOTTED....................0.12[3.1] THRU & THREADED...0.20[5.1] 2.200 55.88 .100 REF. 2.54 DATE DESCRIPTION 4 .300±.015 7.620±.381 1.800 45.72 D D 4.600 116.84 .50±.02 12.7±.5 9 C 3.600 91.44 VICOR 4.20 106.7 8 7 6 5 6X .129 FULL R 3.28 .300±.015 7.62±.38 .40 10.2 .43 10.9 2X 1.00 25.4 THRU HOLE BASEPLATE DIMENSION L PIN SHORT...0.55 .015 [14.0 .38] PIN LONG....0.63 .015 [16.0 .38] .180±.001 4.57±.03 1.40 35.6 SLOTTED BASEPLATE DIMENSIONS FOR ALL MODULE TYPES ARE SHOWN ABOVE; VERSIONS AT RIGHT SHOW DIMENSIONS THAT VARY. B B DRAWN KRISHNA MATERIAL A NOTES: 1. MATERIAL: BASE: 6000 SERIES ALUMINUM PINS: RoHS PINS GOLD PLATE 30 MICRO INCH MIN; NON-RoHS PINS TIN/LEAD 90/10 BRIGHT. 8 7 THREADED BASEPLATE DIM L 9X 3X R.060 1.52 .70 17.8 C FINISH 12/20/2010 DO NOT SCALE DRAWING 6 5 4 3 OUTLN DWG FAST TRACK MX PLASTIC UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE INCH [MM] TOLERANCES ARE: DECIMALS ANGLES X.XX [X.X] = ±0.01 [0.25] ±1° X.XXX [X.XX] = ±0.005 [0.127] THIRD ANGLE PROJECTION SWD VICOR DATE SIZE CAGE CODE C 67131 SCALE 1 : 1 2 DWG NO A REV 37205 1 SHEET 1 OF 1 1