7 8 5 6 1 2 3 4 VICOR CONFIDENTIAL REV. THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF VICOR CORP. 1 DESCRIPTION RELEASED PER E120943 GCK DATE APPROVED 10/22/12 REJH F F .70 17.8 1.913±.010 48.60±.25 <> R.060 1.52 (4) PL. R.063 1.59 (6) PL. R.015 .38 TYP .085±.015 2.16±.38 .386 9.81 <> .24 6.1 (2) PL. .48 12.2 (2) PL. .208 5.28 (17) PL. E 1.467 37.26 <> E .24 6.1 (2) PL. .48 12.2 (2) PL. 3.536±.015 89.81±.38 3.706±.010 94.14±.25 <> 2.934 74.52 <> D D .24 6.1 (2) PL. FULL R TYP .080 2.03 <> C 1.754 44.55 <> <> .001in/in [.03mm/mm] C .010 .25 MAX (6) PL. 1- MATL: ALUMINUM 6063-T5. .100 2.54 2- CORNERS SHOWN SHARP TO BE .005/[.13] MAX. .16 4.1 (3) PL. .16 4.1 (3) PL. NOTES: B .48 12.2 (2) PL. .050 1.27 TYP .125±.003 3.18±.08 (6) PL. <> R.12 3.0 (12) PL. B <> 3- CLEAR FINISH, RoHS COMPLIANT PER CST-0001, LATEST REVISION PER A.) CHROMIUM FREE, OR B.) TRIVALENT CHROMIUM IN ACCORDANCE WITH MIL-DTL-5541, TYPE II, CLASS 1A OR 3. SEE CST-0003 FOR TYPES OF AVAILABLE FINISHES. 4- ALL DIMENSIONS APPLY AFTER PLATING. 5- <> DENOTES CRITICAL CHARACTERISTIC FOR LOT INSPECTION. 6- MAXIMUM STEP BETWEEN ADJOINING CUTTER PASSES TO BE .0005/[.013] 7- BASE PLATE SURFACE PREPARATION PRIOR TO CLEAR FINISH IN ACCORDANCE WITH WS-0016. 8- REMOVE ALL BURRS AND SHARPE EDGES. A DRAWN BY DATE Gary Keay 09/26/2012 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE : INCH / [MM] TOLERANCES ARE: DECIMALS ANGLES X.XX [X.X] = ±0.01 [0.25] ±1° X.XXX [X.XX] = ±0.005 [0.127] THIRD ANGLE PROJECTION DO NOT SCALE DRAWING 8 7 6 5 4 3 2 VICOR SWD A HEATSINK VIBrick X-FLOW .70 SIZE CAGE CODE D 67131 SCALE 2:1 DWG NO REV 39069 SHEET 1 OF 1 1 1