Current Loop Checker Low cost, pocket-sized checker for simulating Current Loops Instantly determine if your device needs calbration Features: • Simulates output ranges of 4mA, 12mA and 20mA from transmitter • Ideal for checking calibration and as a current source for setting up engineering units on a process indicator or controller • Bright red LEDs indicate simulation output or battery status • Accurate to 0.1mA • Overload indication when load exceeds 240Ω • Compact case features push button output selector switch • Dimensions: 3.5 x 2.3 x 1" (89 x 58.4 x 25.4mm); Weight: 10oz (283.5g) • Complete with calibration cable and 9V battery Ordering Information: 412440 ................Current Loop Checker 412440-NIST ......Current Loop Checker with Calibration Traceable to NIST. www.extech.com Specifications subject to change without notice. 8/28/13 - R1 Copyright © 2007-2013 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.