1575 MHz SAW Delay Line 20 MHz Bandwidth Part Number: SF1575DL03104S DESCRIPTION • • • 1575 MHz SAW delay line with 20 MHz minimum bandwidth. 5 x 5 mm LCC package. RoHS compliant. TYPICAL PERFORMANCE Horizontal: Vertical from Top: Frequency : Relative Magnitude : Relative magnitude : Group Delay : S11 (1555-1595 MHz) 20 10 1 40 MHz/div dB/div dB/div ns/div S22 (1555-1595 MHz) IDT • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Ph 1-508-852-5400 • Fax 1-508-852-8456 www.idt.com DSSF1575DL03104S Rev - 3-Nov-2006 Page 1 of 3 1575 MHz SAW Delay Line 20 MHz Bandwidth Part Number: SF1575DL03104S SPECIFICATION Parameter Center Frequency (Fc) Passband Upper Passband Frequency Amplitude Ripple 1 Insertion Loss Average Group Delay 1 Group Delay Ripple 1 Source and Load Impedance Temp Coefficient of Delay Ambient Temperature Note: Min 220 - Typ 1575 20 1.5 19.3 224 41 50 94 25 Max 894 2 23 230 50 100 - Units MHz MHz MHz dB p-p dB ns ns ohms ppm/°C °C 1. Evaluated over a 1565 to 1585 MHz frequency range. MAXIMUM RATINGS Parameter Storage Temperature Range Operating Temperature Range Input Power Level Min Typ Max -40 20 - 25 25 10 85 30 13 Units ˚C ˚C dBm MATCHING CIRCUIT 3 7 Input 50 Ω Single-ended Output 50 Ω Single-ended all other pads GND GND Notes 1. Matching components are not required. IDT • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Ph 1-508-852-5400 • Fax 1-508-852-8456 www.idt.com DSSF1575DL03104S Rev - 3-Nov-2006 Page 2 of 3 1575 MHz SAW Delay Line 20 MHz Bandwidth Part Number: SF1575DL03104S PACKAGE OUTLINE SUGGESTED FOOTPRINT Units: mm Tolerances are ±0.15 mm except where indicated. Pad Configuration: Input: Output: Ground: 3 7 all other pads Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating ISO 9001 Registered All specifications are believed to be accurate and reliable. However, MNC reserves the right to make changes without notice. © 2006 All rights reserved. IDT • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Ph 1-508-852-5400 • Fax 1-508-852-8456 www.idt.com DSSF1575DL03104S Rev - 3-Nov-2006 Page 3 of 3