VERIFICATION OF COMPLIANCE This Verification of Compliance is hereby issued to the product designated below. Product D/D Converter Model MIW03-05D05; MIW03-05S033; MIW03-48D15; MIW03-48S24; MIWI03-24D05; MIWI03-24S033; MIWI03-48D15; MIWI0348S24 Brand Applicant MINMAX TECHNOLOGY CO., LTD. No. 18, Sin-Sin Road, An-Ping Industrial District, Tainan, 702 Taiwan Manufacturer MINMAX TECHNOLOGY CO., LTD. No. 18, Sin-Sin Road, An-Ping Industrial District, Tainan, 702 Taiwan Applicable Standard(s) EN 55022: 2010+AC: 2011 EN 55024: 2010 IEC 61000-4-2: 2008 IEC 61000-4-3: 2010 IEC 61000-4-4: 2012 IEC 61000-4-5: 2005 IEC 61000-4-6: 2008 IEC 61000-4-8: 2009 Reference No. T140903N06-E Test Laboratory Compliance Certification Services Inc. (Tainan Lab.) No.8,Jiucengling, Xinhua Dist., Tainan City 712, Taiwan (R.O.C.) This device has been tested and found to comply with the stated standard(s), which is(are) required by the Council Directive of 2004/108/EC. The test results are indicated in the test report and are applicable only to the tested sample identified in the report. Jeter Wu / Assistant Manager Tainan Lab. Date: September 25, 2014 EC-Declaration of Conformity The following equipment: D/D Converter ( Product Name ) MIW03-05D05; MIW03-05S033; MIW03-48D15; MIW03-48S24; MIWI03-24D05; MIWI03-24S033; MIWI03-48D15; MIWI03-48S24 / ( Model Designation / Brand Name ) MINMAX TECHNOLOGY CO., LTD. ( Manufacturer Name ) No. 18, Sin-Sin Road, An-Ping Industrial District, Tainan, 702 Taiwan ( Manufacturer Address ) is hereby confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive (2004/108/EC). For the evaluation regarding the Electromagnetic Compatibility (2004/108/EC) the following standards are applied: EN 55022: 2010+AC: 2011 EN 55024: 2010 IEC 61000-4-2: 2008 IEC 61000-4-3: 2010 IEC 61000-4-4: 2012 IEC 61000-4-5: 2005 IEC 61000-4-6: 2008 IEC 61000-4-8: 2009 The following manufacturer / importer or authorized representative established within the EUT is responsible for this declaration: ( Company Name ) ( Company Address ) Person responsible for making this declaration: ( Name, Surname ) ( Position / Title ) ( Place ) ( Date ) ( Legal Signature )