English User's Manual

User's Manual
Three Output DC Regulated Power Supplies
Models 382203 (Analog) and 382213 (Digital)
Introduction
Congratulations on selecting Extech's Model 382203 (analog) or 382213 (digital) Regulated DC
Power Supply. The 382203 and 382213 are solid state, compact, well regulated supplies suitable for
many applications including bench testing, field service, hobby and telecommunication equipment
use.
Meter Description
1. Voltage and Current LCD displays
2. Current limit status LED
3. Power switch with status LED
4. 5V & 12V fixed output terminals
5. Output terminals for variable supply
6. Variable voltage and current adjustment knobs
1
2
6
3
4
5
Note: The Model 382213 (LCD metering) is shown above. The Model 382203 (shown on the cover
page) uses analog metering.
382203-V1.7-EU-EN-1/12
Operation
1. The Power Supply must be powered using the rated line voltage (110V or 220V) within + 5%.
2. Before turning the power supply ON, remove all connected loads and set the Voltage
Adjustment Knob to the full counter-clockwise position (0V DC output).
3. To operate the power supply as a constant current supply, the current output should be set
between 10% and 100% of the rated value (3A). The Current Limiting Indicator will light when
the current limiting circuit is activated.
4. Use the Current and Voltage Adjustment knobs for setting variable Current and Voltage output
signals respectively. Use Variable Output Terminals for connections.
5. For 5VDC and 12VDC outputs, use the Fixed Output Terminals.
6. The analog or digital displays will indicate actual current and voltage outputs.
7. Keep the meter's cooling vents (top and sides) clear of obstacles to prevent overheating.
Specifications
Display
382203
382213
Dual Analog Metering
Dual 3-digit LCD Displays
Voltage Output, DC
0-30V
Current Output, DC
0 - 3 Amps
Current Limiting Indicator
Status LED
Accuracy
Ripple and Noise
Line Regulation
Fixed Output Voltage
± 7% Full Scale
± 1% Full Scale + 2 digits
< 5mV
< 0.05% + 10mV
5V / 0.5A (continuous); 1A (max.)
12V / 0.5A (continuous); 1A (max.)
Power
Dimensions
Weight
110/220VAC 50/60Hz (switchable)
152 x 142 x 242mm (6 x 5.6 x 9.5") (WxHxD)
4.5 kgs (10 lbs)
Copyright © 2012 Extech Instruments Corporation (a FLIR company)
All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com
382203-V1.7-EU-EN-1/12