703 SERIES Non-Contacting Pedal Assembly TYPICAL APPLICATIONS: Accelerator pedal for electronic throttle control systems Features/Benefits: • Fully redundant, dual output Hall-effect electrical sensor integrated into pedal assembly • Digital or analog output signals allowable • Dual load/return force generation in compliance with FMVSS 124 • Self adjusting hysteresis control • Compact size, approximate weight - 300 g • Six pin connector • Optional electrical output customization to customer-specific application requirements • 5 different pedal arm configurations available TYPICAL SPECIFICATIONS: ELECTRICAL Linearity (absolute): Rotation (electrical): Rotation (mechanical): Typical Input Voltage: Overall Voltage: See Figure 1 0° to 17° 0° to 18° 5 VDC 18 VDC MECHANICAL Pedal Stepping Force: Internal End Stop Strength: Sideload Strength: Available upon request 900 N 300 N DURABILITY Operating Temp. Range: Life Cycles: Vibration: Thermal Shock: ESD (powered): EMC: -40º to 80ºC 3 x 106 cycles 5 to 100 Hz @ 0.2 to 1.6 g; 8 hrs. each plane -40º to 80ºC; 1000 cycles ± 15 KV, terminal discharge 100 V/m; 1 Hz - 1 Ghz (Additional details of EMC and EMI compliance furnished on request) ENVIRONMENTAL Salt Spray: Humidity: 24 hrs. (5% NaCl) 144 hrs. @ 95% RH NOTE: These standard specifications have been met on existing production-tooled units that are tested on precise test equipment. Details are available including failure criteria. This data sheet does not constitute a warranty that the product will meet the above specifications while used in your application or attached to your test equipment. These products are covered by one or more of the following U.S. and/or foreign patents including: US 5,768,946; US 6,418,813; US 6,426,619; US 6,474,191; GB 1098237; FR 1098237; DE 1098237; US 6,515,473; US 6,809,512. Other U.S. and foreign patents pending. ctscorp.com 703 SERIES DIMENSIONAL DETAILS: 274.2 O 6.5 14.3 14.3 13.5 48.6 33.5 23.5 HEADQUARTERS: CTS Automotive Products 1142 W. Beardsley Ave. Elkhart, IN 46514 USA Tel: 574-389-2700 Fax: 574-295-7810 131 2X O 7 151 PIN NUMBER 6 1 OUTPUT 4 2 GROUND 3 3 SUPPLY +5V ±0.2 PPS2 4 OUTPUT PPS1 5 GROUND PPS1 6 SUPPLY +5V ±0.2 PPS1 2 1 R 185 192.9 DESIGNATION 5 PPS2 PPS2 COMPLIES WITH TYCO /AMP DWG. C-92-4072-2303. MATES WITH TYCO/AMP CONNECTOR P/N 184060-1. Europe CTS Corporation, U.K. Ltd. High Blantyre, Glasgow Scotland, U.K. Tel: +44 (0)1698 505050 Fax: +44 (0)1698 506050 Standard 185mm pedal arm radius geometry is shown. Other variants are available. The pedal pad radius varies from 178mm to 242mm. Contact CTS for information on other pedal arm variants. 66.6 TYPICAL ELECTRICAL OUTPUT: FIGURE 1 90 91.8% u3 OUTPUT CHARACTERISTICS 80 Standard output shown. Both outputs are fully programmable in the finished construction to suit customer-specific needs. 70 PPS1 Vout (%) 60 50 45.9% u3 40 30 20 PPS2 15% u2 7.5% u2 10 0 Date: 08/20/2007 Revised: 06/25/2009 0 5 10 DEGREES OF ROTATION All dimensions metric (mm) unless otherwise indicated 15 17 SALES OFFICES: North America CTS Automotive Products 2701 Cambridge Ct Auburn Hills, MI 48326-2563 USA Tel: 248-475-9400 Fax: 248-475-9403 18 20 Japan CTS Japan, Inc. Kanagawa-ku, Yokohama Japan Tel: (81) 45-450-2363 Fax: (81) 45-450-2241 China CTS Shanghai Shanghai, 200122 P.R. China Tel: 86-21-33688630 Fax: 86-21-33688627 India CTS Automotive, Delhi Gurgaon - 122002 Haryana, India Tel: +91 124 4311330 Fax: +91 124 4311100