10A05 thru 10A10 General Purpose Plastic Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 10.0 Amperes Features Low cost Diffused junction Low forward voltage drop Low reverse leakage current High current capability The plastic material carries UL recognition 94V-0 TJ is 150oC (Max.) and TSTG is 175oC (Max.) with PI glue Mechanical Data Case : JEDEC R-6 molded plastic Polarity : Color band denotes cathode Weight : 0.074 ounce, 2.1 grams Mounting position : Any Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Symbols 10A05 10A1 10A2 10A4 10A6 10A8 10A10 Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current @TA=50oC IF(AV) 10.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 600.0 Amps Maximum forward Voltage at 10A DC VF 1.0 Volts IR 10.0 100 uA CJ 150 Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance (Note 1) Typical thermal resistance (Note 2) Operating junction temperature range Storage temperature range Notes: @TJ=25oC @TJ=100oC pF o RθJA 10.0 TJ -55 to +125 o C -55 to +150 o C TSTG 1. Measured at 1.0MHz and applied reverse voltage of 4.0V D.C. 2. Thermal Resistance Junction to Ambient 73 C/W RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 74