RL151G thru RL157G Glass Passivated Junction Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 1.5 Amperes Features Glass passivated chip Low reverse leakage current Low forward voltage drop High current capability Plastic material has UL flammability classification 94V-0 Mechanical Data Case : JEDEC DO-204AC(DO-15) molded plastic Polarity : Color band denotes cathode Weight : 0.014 ounce, 0.395 gram Mounting position : Any Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Symbols RL151G RL152G RL153G RL154G RL155G RL156G RL157G Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current @TA=55oC I(AV) 1.5 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load IFSM 50.0 Amps Maximum forward Voltage at 1.5A DC VF 1.1 Volts IR 5.0 200 uA Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance (Note 1) Typical thermal resistance (Note 2) Operating junction temperature range Storage temperature range Notes: @TJ=25oC @TJ=125oC CJ 15 RθJA 25 TJ -55 to +150 o C -55 to +150 o C TSTG 1. Measured at 1.0MHz and applied reverse voltage of 4.0V D.C. 2. Thermal Resistance Junction to Ambient 25 pF o C/W RATINGS AND CHARACTERISTIC CURVES 26