LX SERIES 45W SPECIFICATIONS LX SERIES 10~50W LED Driver with Built-in PFC LX SERIES FEATURES FEATURES > 3 Year Warranty > Constant Current Output > Class II Power > Active Power Factor Correction > Short Circuit, Over Voltage Protections > 3 Year Warranty > Constant Current Output > Class II Power > Active Power Factor Correction > Short Circuit, Over Voltage Protections Constant Current Constant Current MODELS SPECIFICATIONS MODELS Model Output TOL. Ripple EFF(typ.) Model Output TOL. Ripple EFF(typ.) Model Output TOL. Ripple EFF(typ.) Model Output TOL. Ripple EFF(typ.) LXU45-C350 350mA (90-129V) ±5% 40% 89% LXU45-C350D 350mA (90-129V) ±5% 40% 89% LXU50-C350 350mA (100-142V) ±5% 40% 89% LXU50-C350D 350mA (100-142V) ±5% 40% 89% LXU45-C700 700mA (46-65V) ±5% 40% 88% LXU45-C700D 700mA (46-65V) ±5% 40% 88% LXU50-C700 700mA (50-71V) ±5% 40% 88% LXU50-C700D 700mA (50-71V) ±5% 40% 88% LXU45-C1050 1050mA (30-43V) ±5% 40% 86% LXU45-C1050D 1050mA (30-43V) ±5% 40% 86% LXU50-C1050 1050mA (33-48V) ±5% 40% 86% LXU50-C1050D 1050mA (33-48V) ±5% 40% 86% * Above models which have suffix “D” are all with 0-10V dimming CHARACTERISTICS INPUT OUTPUT PROTECTION ENVIRONMENT SAFETY * Above models are all with 0-10V dimming CHARACTERISTICS VOLTAGE RANGE, FREQUENCY 90-264VAC, 47~63Hz VOLTAGE RANGE, FREQUENCY 90-264VAC, 47~63Hz POWER FACTOR 0.92/230VAC (70%~100% full load) INPUT CURRENT 0.4A/230VAC POWER FACTOR 0.92/230VAC (70%~100% full load) INPUT CURRENT LEAKAGE CURRENT 0.45A/230VAC 0.75mA/230VAC LEAKAGE CURRENT 0.75mA/230VAC INRUSH CURRENT COLD START, 35A/230VAC at full load INRUSH CURRENT COLD START, 35A/230VAC at full load LINE REGULATION ±3% LINE REGULATION ±3% LOAD REGULATION ±3% LOAD REGULATION ±3% SETUP, RISE TIME 1.5S at full load (cold start, power on) SETUP, RISE TIME 1.5S at full load (cold start, power on) SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE 130% Vout, recovers automatically after fault condition is removed OVER VOLTAGE 130% Vout, recovers automatically after fault condition is removed OPERATING Temperature -20°C ~ +50°C, Humidity 20 ~ 95% RH non-condensing OPERATING Temperature -20°C ~ +50°C, Humidity 20 ~ 95% RH non-condensing STORAGE Temperature -40°C ~ +80°C, Humidity 10 ~ 95% RH STORAGE Temperature -40°C ~ +80°C, Humidity 10 ~ 95% RH SAFETY STANDARDS Design refer to EN61347-1, EN61347-2-13 SAFETY STANDARDS Design refer to EN61347-1, EN61347-2-13 EMC Compliance to EN55015, EN61000-3-2, 3, EN61000-4-2, 3, 4, 5, 6, 8, 11, EN61547 EMC Compliance to EN55015, EN61000-3-2, 3, EN61000-4-2, 3, 4, 5, 6, 8, 11, EN61547 MTBF 400K hours min. refer to MIL-HDBK-217F (25°C) MTBF 400K hours min. refer to MIL-HDBK-217F (25°C) INPUT OUTPUT PROTECTION ENVIRONMENT * Unless otherwise specified, all the above parameters are measured at ambient temperature of 25°C and Vin=230VAC SAFETY * Unless otherwise specified, all the above parameters are measured at ambient temperature of 25°C and Vin=230VAC MECHANICAL SPECIFICATION 14 50W 10~50W LED Driver with Built-in PFC LX SERIES Please contact the sales people for detailed datasheet! MECHANICAL SPECIFICATION Dimensions in mm Dimensions in mm Weight: 270g Weight: 300g www.pairuigroup.com | [email protected] | Tel: 86 (514) 8279 1592 15