Please contact the sales people for detailed datasheet! LL SERIES 20W SPECIFICATIONS 20~60W Isolated LED Driver for Commercial LED Lighting FEATURES > Active Power Factor Correction > Can be Used for Lighting Equipment in Protection Class I and II > No Flickering > 3 Year Warranty > Constant Current Output > Cooling by Free Air Convection > Short Circuit, Over Voltage Protections Constant Current SPECIFICATIONS > 3 in 1 Dimming(0~10V, PWM, Resistor) > Active Power Factor Correction > Can be Used for Lighting Equipment in Protection Class I and II Constant Current MODELS Model Output TOL. Power EFF(typ.) Model Output TOL. Power EFF(typ.) Model Output TOL. Power EFF(typ.) Model Output TOL. Power EFF(typ.) LLMU20-C350 350mA (27-40V) ±5% 14W 83% LLNU20-C300 300mA(35-55V) ±5% 16.5W 84% LLMU20-C350A 350mA(27-40V) ±5% 14W 84% LLNU20-C300A 300mA(35-55V) ±5% 16.5W 85% LLMU20-C400 400mA (27-40V) ±5% 16W 85% LLNU20-C350 350mA(35-55V) ±5% 19.25W 86% LLMU20-C400A 400mA(27-40V) ±5% 16W 84% LLNU20-C350A 350mA(35-55V) ±5% 19.25W 85% LLMU20-C450 450mA (27-40V) ±5% 18W 86% LLNU20-C400 400mA(35-55V) ±5% 22W 86% LLMU20-C450A 450mA(27-40V) ±5% 18W 86% LLNU20-C400A 400mA(35-55V) ±5% 22W 86% LLMU20-C500 500mA (27-40V) ±5% 20W 86% LLMU20-C500A 500mA(27-40V) ±5% 20W 86% LLMU20-C550 550mA (27-40V) ±5% 22W 86% LLMU20-C550A 550mA(27-40V) ±5% 22W 86% CHARACTERISTICS INPUT OUTPUT PROTECTION ENVIRONMENT SAFETY LL SERIES MODELS LL SERIES 20W 20~60W Isolated LED Driver for Commercial LED Lighting FEATURES > 3 Year Warranty > Constant Current Output > Cooling by Free Air Convection > Short Circuit, Over Voltage Protections CHARACTERISTICS VOLTAGE RANGE, FREQUENCY 90~305VAC, 47~63Hz VOLTAGE RANGE, FREQUENCY 90~305VAC, 47~63Hz POWER FACTOR (Typ.) 0.95/230VAC (70%~100% full load) INPUT CURRENT (Typ.) 0.4A/230VAC POWER FACTOR (Typ.) 0.95/230VAC (70%~100% full load) INPUT CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.4A/230VAC COLD START, 60A/230VAC INRUSH CURRENT (Typ.) COLD START, 60A/230VAC LINE REGULATION ±5% LINE REGULATION ±5% LOAD REGULATION ±5% LOAD REGULATION ±5% SETUP, RISE TIME ≤1S at full load (cold start, power on) SETUP, RISE TIME ≤1S at full load (cold start, power on) RIPPLE <1V RIPPLE <4V SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE 110-130% Vout, recovers automatically after fault condition is removed OVER VOLTAGE 110-130% Vout, recovers automatically after fault condition is removed OPERATING Temperature -30°C ~ +50°C, Humidity 20 ~ 90% RH non-condensing OPERATING Temperature -30°C ~ +50°C, Humidity 20 ~ 90% RH non-condensing STORAGE Temperature -40°C ~ +80°C, Humidity 10 ~ 90% RH STORAGE Temperature -40°C ~ +80°C, Humidity 10 ~ 90% RH SAFETY STANDARDS Design refer to EN61347-1, EN61347-2-13 SAFETY STANDARDS Design refer to EN61347-1, EN61347-2-13 EMC Compliance to EN55015, EN61000-3-2, 3, EN61000-4-2, 3, 4, 5, 6, 8, 11, EN61547 EMC Compliance to EN55015, EN61000-3-2, 3, EN61000-4-2, 3, 4, 5, 6, 8, 11, EN61547 MTBF 400K hours min. refer to MIL-HDBK-217F (25°C) MTBF 400K hours min. refer to MIL-HDBK-217F (25°C) INPUT OUTPUT PROTECTION ENVIRONMENT * Unless otherwise specified, all the above parameters are measured at ambient temperature of 25°C and Vin=230VAC SAFETY * Unless otherwise specified, all the above parameters are measured at ambient temperature of 25°C and Vin=230VAC MECHANICAL SPECIFICATION 18 LL SERIES MECHANICAL SPECIFICATION Dimensions in mm Dimensions in mm Weight: 140g Weight: 145g 19