www.murata-ps.com D1U54-D-1200-12-Hx4PC Series 54mm 1U Front End DC-DC Power Converter PRODUCT OVERVIEW The D1U54-D-1200-12-Hx4PC series are highly efficient 1200 watt, DC input front end modules with a 12V main output and a choice of 3.3V or 5V (20W) standby rails. The power module is able to current share with up to eight (8) other power modules of the same type operating in parallel or N+1 redundancy. The supplies may be hot plugged, and include integral isolation devices. The power modules are fully protected from overload and overvoltage and are able to auto-recover from overtemperature faults. A Status LED is provided on the front panel and additional control and status reporting is provided by hardware logic signals and via a PMBus™ digital interface. A low profile sub 1U height enclosure provides an excellent power density of >28W/in3 that is ideal for delivering reliable, efficient power to servers; workstations; storage systems and other 12V distributed power systems, including direct operation from intermediate bus converters. FEATURES ORDERING GUIDE 1200W output power (no derating across the full DC input voltage range) 1.57"(1U) x 12.65" x 2.15" 92% efficiency Part Number D1U54-D-1200-12-HC4PC D1U54-D-1200-12-HA4PC D1U54-D-1200-12-HC3PC D1U54-D-1200-12-HA3PC 12VDC Main output INPUT CHARACTERISTICS 3.3VSB or 5VSB output (20W) Parameter DC Input Voltage Operating Range Turn-on Input Voltage Turn-off Input Voltage Maximum Current @ VIN = -48Vdc >28W/in power density N+1 Redundancy Capable; hot plug/swap (up to 8 modules in parallel) Active current sharing on 12V main output; integral MOSFET ORING Over-Voltage, Over-Current; Over-Temperature Protection Internal variable speed cooling fans 3 DC Input Inrush Peak Current Efficiency (-48Vdc) Reverse polarity protection PMBus™ Power Management Bus RoHS Compliant www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html Power Output Main Output 1200W 12V Conditions Ramp Up Ramp Down 1200W Cold start between 0 to 200ms 20% FL 50% FL 100% FL Reversed input cables; no internal/external fuse failure Standby Output 3.3V 5V 3.3V 5V Min -40 -39.5 -35.5 Typ -48/-60 -40 -36 -40 -72 Airflow Back to Front Front to Back Max -72 -40.5 -36.5 40 50 100 90 92 90 +40 Units Vdc Adc Apk % +72 Vdc Max. Units OUTPUT VOLTAGE CHARATERISTICS Output Voltage Parameter Voltage Set Point Line & Load Regulation Main Ripple & Noise1 12V Output Current Load Capacitance Voltage Set Point Line & Load Regulation 3.3VSB Ripple Voltage & Noise1 Output Current Load Capacitance Voltage Set Point Line & Load Regulation 5VSB Ripple Voltage & Noise1 Output Current Load Capacitance 1 Conditions Min. Combined regulation 20MHz Bandwidth -40Vdc to -72Vdc DC input 11.6 Combined regulation 20MHz Bandwidth 3.14 Typical 12 12.4 120 100A 30,000 0 3.3 3.46 120 6 10,000 0 5.0 4.76 20MHz Bandwidth 0 5.24 120 4 10,000 Vdc mV P-P A μF Vdc mV P-P A μF Vdc mV P-P A μF Ripple and noise are measurements are to be performed with a parallel combination of a 0.1μF ceramic capacitor and 10μF tantalum capacitance on each of the power module output measurement nodes. A short coaxial cable from measurement point to ’scope shall be used Available now at www.murata-ps.com/en/3d/acdc.html For full details go to www.murata-ps.com/rohs CB Test Certificate and Test Report PM www.murata-ps.com/support D1U54-D-1200-12-Hx4PC.A01 Page 1 of 6 D1U54-D-1200-12-Hx4PC Series 54mm 1U Front End DC-DC Power Converter OUTPUT CHARACTERISTICS Parameter Remote Sense (Main Output) Output Rise (Monotonic) Startup Time Transient Response Current Sharing Accuracy (between sharing modules; up to 8 in parallel) Hot Swap Transients Hold Up Time1 Conditions Overall compensation at full load; +VE & -VE connections 10% to 95% rise time DC Ramp Up PS_ON activation 12V, 50-100% or 100-50% step load; 1A/μs slew rate 3.3/5VSB 50-100% or 100-50% step load 1A/μs slew rate Min. Typ. Max. 120 No positive voltage excursion 3 200 ±600 ±165/250 At 100% load FL (Full Load); 48VDC nominal input prior to hold up Units mV s ms mV ±10 % 5 % ms Max. 70 55 90 95 Units 1 ENVIRONMENTAL CHARACTERISTICS Parameter Storage Temperature Range Operating Temperature Range Operating Humidity Storage Humidity Altitude (no derating at 40°C) Shock Sinusoidal Vibration MTBF Safety Approvals (Standards) – Pending Submission Input Fusing Weight Conditions Non-Condensing 1200W Output Power Non-Condensing Min. -40 0 5 5 3000 Non-Operating Operational, 0.5G; 5-500Hz Telcordia SR-332 M1C1 @ 40°C CSA/UL C22.2 No.60950-1-07, 2nd Ed. IEC 60950-1:2005, (2nd Edition) with Am. 1:2009 EN 60950-1:2006 + A11:2009 + A1:2010 CE Marking per LVD DIRECTIVE 2006/95/EC Internal 60A/170VDC fast blow fuse on the DC line input (TBC) Typ. 30 452 °C % m G K Hours 3.15/1.43 Lbs/kg Max. 70 14 Units °C V 115 135 A 3.6 6.5 5.4 4.5 4.0 8.5 6.0 5.5 V A V A Max. Units Vrms Vdc PROTECTION CHARACTERISTICS Output Voltage N/A 12V (Main) 3.3VSB 5VSB Parameter Over-Temperature Over-Voltage Over-Current Over-Voltage Over-Current Over-Voltage Over-Current Conditions Air inlet temperature; Auto re-start Latching; toggle PS_ON or recycle DC input to reset For slow overload events a constant current will be sustained for 1sec followed by a latch off that will auto reset in 5secs. For hard (short circuit) events the output will shut down within 50ms and auto restart within 200ms. This cycle will be repeated ten times at which point the output will permanently latch off. The power module will require to be reset by recycling the incoming DC source or “toggling” PS_ON. Latching; toggle PS_ON or recycle DC input to reset Shutdown followed by auto-recovery Latching; toggle PS_ON or recycle DC input to reset Shutdown followed by auto-recovery Min. 60 13 Conditions Input to Output - Basic Output to Chassis (Ground) Min. 1000 500 Typ. 65 ISOLATION CHARACTERISTICS Parameter Insulation Safety Rating/Test Voltage Isolation Typ. 1 Assumes deployment within systems utilizing dual redundant “A” and “B” DC input feeds STATUS INDICATORS Conditions No incoming DC supply present; power module completely off. Standby Rail ON; Main Output OFF; DC input present & correct Standby Rail ON; Main Output ON Main Output overcurrent; undervoltage, overvoltage warning FAN_FAULT; overtemperature; standby rail overcurrent, Main Output overcurrent or overvoltage Power Module Warning Event GREEN (Power) LED Status LED not illuminated Blinking Solid Green LED not illuminated LED not illuminated LED not illuminated AMBER (Fault) LED Status LED not illuminated LED not illuminated Solid Amber Solid Amber Blinking www.murata-ps.com/support D1U54-D-1200-12-Hx4PC.A01 Page 2 of 6 D1U54-D-1200-12-Hx4PC Series 54mm 1U Front End DC-DC Power Converter EMISSIONS AND IMMUNITY Characteristic Conducted Emissions ESD Immunity Radiated Field Immunity Electrical Fast Transients/Burst Immunity Surge Immunity RF Conducted Immunity Magnetic Field Immunity Voltage Dips & Interruptions Standard FCC 47 CFR Part 15 CSIPR 22/EN55022 IEC/EN 61000-4-2; IEC/EN 61000-4-3 IEC/EN 61000-4-4 IEC/EN 61000-4-5 IEC/EN 61000-4-6 IEC/EN 61000-4-8 NEBS GR-1089-CORE Issue Compliance Class A with 6dB margin Level 4; Criteria A Level 3; Criteria B Level 3; Criteria A Level 3; Criteria A Level 3; Criteria A 3A/m; Criteria B Relevant sections and compliance levels TBD OUTPUT CONNECTOR AND SIGNAL INTERFACE NB: With respect to signals columns 5, the italic “1” refers to the shortest level signal pin/power blade; the italic “2” is the “longest” signal pin. The “shortest” pins are the “last to make, first to break” in the mating sequence. www.murata-ps.com/support D1U54-D-1200-12-Hx4PC.A01 Page 3 of 6 D1U54-D-1200-12-Hx4PC Series 54mm 1U Front End DC-DC Power Converter PIN ASSIGNMENTS: D1U54-D-1200-12-HxxPC ALTERNATIVE PIN ASSIGNMENTS: D1U54-D-1200-12-HxxC TE Connectivity 1926734-2 (Power Supply) Pin Function Description TE Connectivity 1926734-4 (Power Supply) Pin Function Description 6, 7, 8, 9, 10 1, 2, 3, 4, 5 V1 (+12VOUT) +12V Main Output 6, 7, 8, 9, 10 +12V RTN/PGND +12V Main Output Return 1, 2, 3, 4, 5 V1 (+12VOUT) +12V Main Output +12V RTN/PGND +12V Main Output Return A1 +VSB Standby Output A1 +VSB Standby Output B1 +VSB Standby Output B1 +VSB Standby Output C1 +VSB Standby Output C1 +VSB Standby Output D1 +VSB Standby Output D1 +VSB Standby Output E1 +VSB Standby Output E1 +VSB A2 +VSB_Return Standby Output Return A2 +VSB_Return Standby Output Standby Output Return B2 +VSB_Return Standby Output Return B2 +VSB_Return Standby Output Return C2 Unused No End User Connection C2 Unused No End User Connection D2 Unused No End User Connection D2 Unused No End User Connection E2 Unused E2 Unused No End User Connection A3 APS A3 PS_KILL Power Supply “kill”; short pin B3 Unused No End User Connection I2C Address Protocol Selection (Select by appropriate pull down resistor No End User Connection B3 Unused No End User Connection C3 SDA I2C Serial Data Line C3 SDA D3 V1_SENSE_R Remote Sense Return (-VE) D3 V1_SENSE_R E3 V1_SENSE Remote Sense (+VE) E3 V1_SENSE Remote Sense (+VE) A4 SCL I2C Serial Clock Line A4 SCL I2C Serial Clock Line B4 PS_ON_L C4 SMB_ALERT D4 I2C Serial Data Line Remote Sense Return (-VE) Remote On/Off (Enable/Disable) B4 PS_ON_L Alert signal to host system C4 SMB_ALERT Unused No End User Connection D4 ISHARE Current Share bus; short pin E4 DC_OK DC Input Source Present & “OK” E4 DC_OK DC Input Source Present & “OK” A5 PS_KILL Power Supply “kill”; short pin A5 A0 B5 ISHARE Current Share bus; short pin B5 Unused No End User Connection Power “OK”; short pin C5 PW_OK Power “OK”; short pin C5 PW_OK D5 Unused No End User Connection D5 A1 E5 PRESENT_L E5 PRESENT_L Power Module Present; short pin Remote On/Off (Enable/Disable) Alert signal to host system I2C LSB Address Line I2C Address Line Power Module Present; short pin Consult Murata Sales for availability of alternative “HxxC” model variants. MATING CONNECTOR (OUTPUT & SIGNALS) Supplier Press Fit, Straight --- TE Connectivity (Tyco) Press Fit, Right Angle --- Solder Straight --- Solder Right Angle 2-1926739-5 2-1926733-5 (Legacy Now Obsolete) DC INPUT TERMINAL BLOCK Dinkle Enterprise 2 Way Terminal Block; 40A rating; +VE & -VE DC Input cable connections DT-7C-B14W-02 www.murata-ps.com/support D1U54-D-1200-12-Hx4PC.A01 Page 4 of 6 D1U54-D-1200-12-Hx4PC Series 54mm 1U Front End DC-DC Power Converter WIRING DIAGRAM FOR OUTPUT Dotted lines show optional remote sense connections. Optional remote sense lines can be attached to a load that is a distance away from the power supply to improve regulation at the load. V1_SENSE (Main Output Remote Sense) V1_SENSE (Main Output Remote Sense) +12V main output E3 +12V main output 6-10 E3 6-10 12V load D1U54P 1-5 +12V main output return D1U54P +12V main output return 1-5 V1_SENSE_R V1_SENSE_R D3 D3 ISHARE ISHARE B5 (or D4) A1,B1,C1,D1,E1 B4 A2,B2 A5 (or A3) VSB A1,B1,C1,D1,E1 VSB PS_ON VSB_return PS_KILL B5 (or D4) PS_ON B4 VSB load FET, BJT, wire or switch (debounced ) to turn on +12V main output VSB_return A2,B2 PS_KILL A5 (or A3) CURRENT SHARING NOTES 1. Main 12VDC Output: Analogue active share bus. The ISHARE bus (Pin B5 or D4) must be connected on all sharing modules. It is not required that the SENSE signals are connected to the remote load for current share to operate correctly. 2. Up to eight (8) power modules can be connected in parallel (non-redundant) or N+1 configuration. The current share bus is analogue bi-directional (can source or sink current from the ISHARE bus). The voltage of the bus would measure 8VDC for a single power module at 100% load; for two (2) modules sharing a common load the ISHARE bus voltage would be 4V for a perfect 50/50 current share scenario. 3. The VSB (Standby Output) output of the power module can also be connected in parallel; internal output isolation devices are provided however the combined available power is limited to that available from a single power module (3.3V or 5V; 20W) irrespective of the number of modules connected in parallel. www.murata-ps.com/support D1U54-D-1200-12-Hx4PC.A01 Page 5 of 6 D1U54-D-1200-12-Hx4PC Series 54mm 1U Front End DC-DC Power Converter MECHANICAL DIMENSIONS Notes 1. Dimensions: 1.57" x 12.66" x 2.15" (40.0 x 321.5mm x 54.5mm) 2. Safety earth/ground connection via separate dedicated M4 pan head screw connection (located above terminal block) OPTIONAL ACCESSORIES Description Part Number D1U54-12 Output Interface Connector Card D1U54P-12-CONC APPLICATION NOTES Document Number Description Link ACAN-44 D1U54P-12-CONC Output Interface Connector Card www.murata-ps.com/data/apnotes/acan-44.pdf ACAN-58 D1U54-D-12 Communications Protocol Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. ISO 9001 and 14001 REGISTERED This product is subject to the following operating requirements and the Life and Safety Critical Application Sales Policy: Refer to: http://www.murata-ps.com/requirements/ Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2015 Murata Power Solutions, Inc. www.murata-ps.com/support D1U54-D-1200-12-Hx4PC.A01 Page 6 of 6