Blade Fuses Low Profile MINI® Blade Fuses Rated 32V The Low Profile MINI® fuse has similar performance characteristics as the standard MINI® fuse. The lower overall height allows for more space and weight savings. The Low Profile MINI® fuse is designed to mate with tuning-fork terminals, which provides additional weight and material savings in fuse box designs by eliminating the need for female box terminals. Specifications Low Profile MINI ® Blade Fuses Voltage Rating: Interrupting Rating: *Component Level Temperature Range: **System Level Temperature Range: 58 VDC 1000A @ 58 VDC -40˚C to +125˚C -40˚C to +105˚C 105°C is a typical system level temperature requirement. Terminals: Housing Material: Complies with: Ag plated zinc PA66 ISO 8820-9 Ordering Information Plating % of Rating 0891xxx.NXS 5000 Ag 110 360,000 s / – 0891xxx.U 500 Ag 135 0.750 s / 120 s 100 Ag 200 0.150 s / 5 s 350 0.080 s / 0.250 s 600 0.030 s / 0.100 s 0891xxx.H Low Profile MINI 10.9mm Fuse ® 0891xxx.NXWS Dimensions Dimensions in mm Time-Current Characteristics Package Size Part Number Low Profile MINI ® 10.9mm Blade Fuses Low Profile MINI ® 10.9mm 5000 Ag Opening Time Min / Max (s) Ratings Part Number Current Rating (A) 0891005._ 089107.5_ 0891010._ 0891015._ 0891020._ 0891025._ 0891030._ 5 7.5 10 15 20 25 30 Time-Current Characteristic Curves Housing Material Color Cold Resistance (mΩ) I2t (A2s) 17.21 10.65 7.59 4.70 3.35 2.56 2.06 22 53 102 198 420 613 1110 Temperature Rerating Curve Low Profile MINI ® 10.9mm *Component Level Temperature = the maximum ambient temperature that a single fuse will survive. This does not factor-in the heat from a populated fuse box, but does include the heat from the current load with the proper rerating. **System Level Temperature represents the ambient temperature of the fuse box at a location within the vehicle. The temperature within a populated fuse box (in a given location) will be higher. The limiting factor is the plating. Sn-plating’s temperature limit is ≈130°C, and Ag-plating allows up to 150°C at the terminal interface. Littelfuse products are designed for specific applications and should not be used for any purpose (including, without limitation, automotive applications) not expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse product documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse product documentation. littelfuse.com 4