Radial Lead Fuses TE5® > Fast-Acting Fuse > 395 Series 395 Series, TE5® Fast-Acting Fuse PS E Pb RoHS Description The 395 Series TE5® Fuses are fast-acting type, 125V and are designed in accordance to UL 248-14. Features • RoHS compliant and Lead-free • Low internal resistance • Reduced PCB space requirements • Vibration resistant • Shock safe casing • Halogen Free • Direct solderable or plug-in versions • Internationally approved Agency Approvals Agency PS E • Available from 0.05A to 6.3A Agency File Number Ampere Range E67006 0.05A-6.3A E67006 0.05A-6.3A JET1896-31007-1005 1A - 5A Applications • Power supplies • Consumer Electronics • Industrial controllers Electrical Characteristics Additional Information Datasheet • Battery chargers Resources % of Ampere Rating Opening Time 200% 60 Seconds, Max. Samples Electrical Characteristics Amp Code Rated Current Voltage Rating 0050 0063 0080 0100 0125 0160 0200 0250 0315 0400 0500 0630 0800 1100 1125 1160 1200 1250 1315 1400 1500 1630 50mA 63mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 400mA 500mA 630mA 800mA 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V Breaking Capacity Nominal Cold Resistance (Ohms) Voltage Drop 1.0×IN max. (mV) Power Dissipation 1.0×IN max. (mW) Melting Integral 10×IN max. (A2s) 100A @125 VAC 8.1290 4.6900 3.6500 7.4910 6.1970 4.2850 2.9780 2.3100 1.7220 0.2200 0.1570 0.1180 0.0970 0.0710 0.0635 0.0492 0.0412 0.0305 0.0247 0.0193 0.0139 0.0116 1600 1300 1200 1100 1350 1000 950 900 800 230 220 210 200 190 180 170 160 150 140 130 120 115 85 85 100 110 160 150 210 225 255 95 110 135 160 190 225 275 450 375 445 520 600 850 0.0001 0.0001 0.0002 0.0013 0.0019 0.0037 0.0075 0.0130 0.0260 0.0150 0.0250 0.0450 0.0680 0.1300 0.2000 0.3900 0.5300 1.1000 1.9000 3.2000 6.1000 9.7000 Notes: 1. 1.00 means the number one with two decimal places. 1,000 means the number one thousand. 2. Resistance is measured at 10% of rated current, 25°C. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Application testing is strongly recommended. Revised: 11/11/15 Agency Approvals PS E x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Radial Lead Fuses TE5® > Fast-Acting Fuse > 395 Series 100000 120 PERCENT OF RATING 0.400A 0.500A 0.630A 0.800A 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A 140 0.100A 0.125A 0.160A 0.200A 0.250A 0.315A Average Time Current Curves 0.050A 0.063A 0.080A Temperature Re-rating Curve 100 10000 80 60 23°C 40 1000 20 -40 -20 0 20 40 60 TIME IN SECONDS 0 80 AMBIENT TEMPERATURE (°C) Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 100 10 1 0.100 0.010 0.001 0.02 0.100 1 10 100 CURRENT IN AMPERES Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter 240 220 Preheat: 200 (Depends on Flux Activation Temperature) 180 160 140 120 100 80 60 40 Time (Seconds) Cooling Time Preheat Time Dwell Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 20 0 10 20 0 Temperature (°C) - Measured on bottom side of board 300 Lead-Free Recommendation (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/11/15 Radial Lead Fuses TE5® > Fast-Acting Fuse > 395 Series Product Characteristics Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94 V-0 Round Pins: Copper, Tin-plated Materials Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) Soldering Heat Resistance 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s. (Soldering Iron) -40ºC to +85ºC (Consider re-rating) Operating Temperature -40ºC to +85ºC/21 days (IEC 60068-1,-2-1,-2-2,-2-78) +10ºC to +60ºC RH ≤ 75% yearly average, without dew, maximum value for 30 days95% 24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60Hz at 0.75mm amplitude 60 - 2000Hz at 10g acceleration Climatic Category Stock Conditions Vibration Resistance Dimensions Part Numbering System 395 xxxx 0000 max.4 max. 8 8,5 Series 5,08 Refer to Amp Code column of Electrical Characteristics Table Packaging Code 0000 Tape/Ammopack (1,400 pcs.) 0440 Short Leads - Bulk (1,400 pcs.) 1 +0,1 L Æ 0,6 0,5 min Amp Code 1,5 Holes in the printed circuit board Holes in PCB Long Leads (L=18.8mm) Short Leads (L=4.3mm) Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width N/A N/A 1,400 1,400 0000 0440 N/A N/A 395 Series Tape and Ammopack Short Leads © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/11/15