Radial Lead Fuses TE7 > Time-Lag Fuse > 807 Series 807 Series Fuse RoHS Pb PS E Description TE7 807 Series is a time-lag type subminiature fuse designed for overcurrent protection. Features PS E • Low internal resistance • Reduced PCB space requirements • Vibration resistant • Direct solderable or plug-in versions Agency Approvals Agency • Lead-free, Halogen-free and RoHS compliant • Shock safe casing • Excellent surge tolerance due to high i2t values Agency File Number Ampere Range Applications E67006 0.80A – 6.3A • Battery Charger • Power Supplies SU05024-10005 SU05024-10004 SU05024-10006 0.8A 1-2.5A 3.15-6.3A • Consumer Electronics • Industrial Controllers JET1896-31007-2004 JET1896-31007-2005 1A - 5A 6.30A Additional Information Electrical Characteristics for Series Datasheet % of Ampere Rating Opening Time 125% 3600 secs., Minimum 200% 120 secs., Maximum 1000% 100 milliseconds Minimum 1 secs., Maximum Samples Resources PS E Electrical Characteristic Specifications by Item Voltage Rating (V) Interrupting Nominal Cold Rating Resistance (Ohms) Voltage Drop 1.0×IN max [mV] Power Dissipation 1.25×IN max [mW] Melting Integral 10×IN max [A2s] Agency Approvals Amp Code Amp Rating 0800 0.80A 300V 0.1887 218 332 12.480 x x 1100 1.00A 300V 0.1166 171 324 20.000 x x 1125 1.25A 300V 0.0816 151 352 30.00 x x x 1160 1.60A 300V 0.0569 135 464 51.00 x x x 1200 2.00A 300V 0.0458 183 486 88.00 x x x 1250 2.50A 300V 0.0349 118 675 137.50 x x x 100A @300VAC PS E x 1315 3.15A 300V 0.0228 163 818 212.94 x x x 1400 4.00A 300V 0.0174 128 945 368.00 x x x 1500 5.00A 300V 0.0138 98 1091 748.00 x x x 1630 6.30A 300V 0.0100 78 1125 1099.00 x x x Note: 1. Resistance is measured at 10% of rated current, 25°C. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Application testing is strongly recommended. Revised: 11/17/15 Radial Lead Fuses TE7 > Time-Lag Fuse > 807 Series Average Time Current Curves 0.8A 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 807 RE-RATING CURVE 140% 1000.000 6.3A Temperature De-rating Curve PERCENT OF RATING 120% 100% 100.000 80% 60% 40% 10.000 Blowtime [sec]. 20% 0% -55 -30 -5 20 45 70 95 120 AMBIENT TEMPERATURE (°C) Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 1.000 0.100 0.010 0.001 0.1 1 10 100 1000 CURRENT [A] Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 (Typical Industry Recommendation) Temperature Minimum: 100˚C Temperature Maximum: 150˚C Preheat Time: 60-180 seconds Solder Pot Temperature: 260˚C Maximum Solder Dwell Time: 2-5 seconds 40 Recommended Hand-Solder Parameters: Time (Seconds) Cooling Time Preheat Time Dwell Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 20 0 10 20 0 Temperature (°C) - Measured on bottom side of board 300 Solder Iron Temperature: 350˚C ± 5˚C Heating Time: 5 seconds maximum Note: These devices are not recommended for IR or Convection Reflow Process. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/17/15 Radial Lead Fuses TE7 > Time-Lag Fuse > 807 Series Product Characteristics Materials Base/Cap: Brown Thermoplastic Polyamide, UL 94V-0 Round Pins: Copper, Sn Plated Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260˚C, ≤ 3s (Wave) 350˚C, ≤ 1s (Soldering Iron) Soldering Heat Resistance 260˚C, 10s (IEC 60068-2-20) 350˚C, 3s (Soldering Iron) Operating Temperature -40˚C to +125˚C (Consider re-rating) Climatic Category -40˚C/+85˚C/21 days (IEC 60068-1, -2-1, -2-2, -2-78) Stock Conditions +10˚C to +60˚C relative humidity 75% yearly average, without dew, maximum value for 30 days – 95% Vibration Resistance 24 cycles at 15 min. each (IEC60028-2-6) 10 - 60Hz at 0.75mm amplitude 20 – 2000Hz at 10g acceleration Part Numbering System Dimensions 807 xxxx 0000 SERIES AMP Code Refer to Amp Code column of Electrical Characteristics Table PACKAGING Code 0000 Tape/Ammopack (900 pcs) 0440 Short Leads - Bulk (900 pcs) Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Reel Size N/A N/A 1,000 1,000 0000 0440 N/A N/A 807 Series Tape & Ammopack Short Leads © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/17/15