NTE3001 Light Emitting Diode Miniature, Diffused Red Description: The NTE3001 is a deep red source color device made with a diffused Gallium Aluminum Indium Phosphide (AlGaInP) Red Light Emitting Diode mounted in a two lead epoxy package with a red diffused lens. The NTE3001 is intended for high volume indicator light applications where low cost, high reliability, and top performance are required. Major usage is in applications such as diagnostic lights on printed circuit boards and panel lights. This device can be used to displace subminiature lamps as small as T3/4 size. Features: D Subminiature Package D Wide Viewing Angle D Long Life Solid State Reliability D Low Package Profile Applications: D Small Indicator for Indoor Applications D Flat Backlight for LCD, Switches and Symbols D Indicator and Backlight in Office Equipment D Indicator and Backlight for Battery Driven Devices D Indicator and Backlight for Audio and Video Equipment D Automotive: Backlighting in Dashboards and Switches D Telecommunication: Indicator and Backlighting in Telephone and FAX Absolute Maximum Ratings: (TA = +255C unless otherwise specified) Reverse Voltage, VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V Forward Current, IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25mA Peak Forward Current (Duty 1/10 @ 1kHz), IFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60mA Power Dissipation, Pd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60mW Electrostatic Discharge (HBM), ESD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000V Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −405 to +855C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −405 to +1005C Lead Temperature, TL (Reflow soldering, 10sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +2605C (Hand soldering, 3sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +3505C Rev. 3−14 Electrical/Optical Characteristics: (TA = +255C unless otherwise specified) Parameter Symbol Luminous Intensity Test Conditions Min Typ Max Unit IV IF = 20mA 63 125 − mcd 2q1/2 IF = 20mA − 45 − degrees Peak Wavelength lp IF = 20mA − 650 − nm Dominate Wavelength ld IF = 20mA − 639 − nm Spectral Radiation Bandwidth Dl IF = 20mA − 20 − nm Forward Voltage VF IF = 20mA 1.7 2.0 2.4 V Reverse Current IR VR = 5V − − 10 mA Viewing Angle .079 (2.0) .083 (2.1) ÉÉ ÉÉ .075 (1.9) Dia Cathode .276 (7.0) Min .276 (7.0) Min .032 (0.8) R .106 (2.7) .055 (1.4) .006 (0.15) .030 (0.75)