NTE3002 Light Emitting Diode Water Clear, Yellow Description: The NTE3002 is a yellow source color device made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode in a two lead epoxy package with a clear lens. The NTE3002 is intended for high volume indicator light applications. Major usage is in applications such as diagnostic lights on printed circuit boards and panel lights. It can also be used to displace subminiature lamps as small as T3/4 size. Features: D Subminiature Package D Wide Viewing Angle D Long Life Solid State Reliability D Low package Profile Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105mW Forward Current Continuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA Peak (0.1 ms pulse width, 1/10 duty cycle) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140mA Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0V Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 40° to +85°C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 40° to +85°C Lead Temperature (During Soldering, 5sec max, 2mm below package base) . . . . . . . . . . . . +260°C Electro - Optical Characteristics: (TA = +25°C unless otherwise specified) Parameter Test Conditions Min Typ Max Unit Luminous Intensity IF = 20mA 10 30 - mcd Peak Emission Wavelength IF = 20mA - 590 - nm Dominate Wavelength IF = 20mA - 588 - nm Spectral Line Halfwidth IF = 20mA - 35 - nm Forward Voltage IF = 20mA - 2.1 2.5 V Capacitance V = 0, f = 1MHz - 20 - pF Reverse Current VR = 5.0V - - 10 µA View Angle (2θ1/2) Note 1 - 20 - degrees Note 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. .098 (2.5) .043 (1.1) .075 (1.9) Dia .016 (0.4) .020 (0.5) Cathode .276 (7.0) Min .315 (8.0) Min .055 (1.4) .110 (2.8) ÉÉÉ ÉÉÉÉÉÉ Polarity Mark .079 (2.0)