D/CRCW e3 - Sample Kit www.vishay.com Vishay Sample Kit Standard Thick Film Chip Resistors D/CRCW 100 1 % e3 FEATURES • The kits contain 1/4 E96 series • The values specified ± 1 % tolerance and ± 100 ppm/K • AEC-Q200 qualified • For further information refer to datasheet D/CRCW e3: www.vishay.com/doc?20035 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 The commercial-off-the-shelf thick film chip resistors are now conveniently taped in strips, individually labeled and packaged in new engineering design kits MINILABS, STANDARD ELECTRICAL SPECIFICATIONS PART NUMBER PRODUCT LAE1ACHIP0402KFE96 D10/CRCW0402 e3 LAE1BCHIP0603KFE96 D11/CRCW0603 e3 LAE1CCHIP0805KFE96 D12/CRCW0805 e3 LAE1DCHIP1206KFE96 D25/CRCW1206 e3 LIMITING RATED ELEMENT TEMPERATURE RESISTANCE TOL. QUANTITY DISSIPATION VOLTAGE COEFFICIENT RANGE SERIES % PIECES P70 Umax. ppm/K W AC/DC 10R to 1M 0.063 50 ± 100 ±1 1/4 E96 122 x 100 + Jumper 10R to 1M 0.10 75 ± 100 ±1 1/4 E96 122 x 50 + Jumper 10R to 1M 0.125 150 ± 100 ±1 1/4 E96 122 x 50 + Jumper 10R to 1M 0.25 200 ± 100 ±1 1/4 E96 122 x 50 + Jumper PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: LAE1ACHIP0402KFE96 L A E 1 A C H I P 0 4 0 2 K F E 9 6 MODEL PRODUCT TCR TOLERANCE SERIES LAE 1A LAE 1B LAE 1C LAE 1D CHIP RESISTOR 0402 CHIP RESISTOR 0603 CHIP RESISTOR 0805 CHIP RESISTOR 1206 K = ± 100 ppm/K F=±1% 1/4 E96 PRODUCT DESCRIPTION: LAB D10/CRCW0402 100 1/4 E96 1 % 122x100 e3 LAB D10/CRCW0402 100 1/4 E96 1% 122x100 e3 MODEL PRODUCT TCR VALUE/SERIES TOLERANCE QUANTITY LEAD (Pb)-FREE Minilab, thick film chip D10/CRCW0402 D11/CRCW0603 D12/CRCW0805 D25/CRCW1206 ± 100 ppm/K Every fourth value from E96 series ±1% 122 x 100 122 x 50 e3 = pure tin component termination finish Revision: 19-Feb-15 Document Number: 31092 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 D/CRCW e3 - Sample Kit www.vishay.com Vishay RESISTANCE TABLE () 0 10 100 1K 10K 100K 11 110 1.1K 11K 110K 12.1 121 1.21K 12.1K 121K 13.3 133 1.33K 13.3K 133K 14.7 147 1.47K 14.7K 147K 16.2 162 1.62K 16.2K 162K 17.8 178 1.78K 17.8K 178K 19.6 196 1.96K 19.6K 196K 21.5 215 2.15K 21.5K 215K 23.7 237 2.37K 23.7K 237K 26.1 261 2.61K 26.1K 261K 28.7 287 2.87K 28.7K 287K 31.6 316 3.16K 31.6K 316K 34.8 348 3.48K 34.8K 348K 38.3 383 3.83K 38.3K 383K 42.2 422 4.22K 42.2K 422K 46.4 464 4.64K 46.4K 464K 51.1 511 5.11K 51.1K 511K 56.2 562 5.62K 56.2K 562K 61.9 619 6.19K 61.9K 619K 68.1 681 6.81K 68.1K 681K 75 750 7.5K 75K 750K 82.5 825 8.25K 82.5K 825K 90.9 909 9.09K 90.9K 909K 1M Note • The series of resistances included in the kits is derived from the E96 series according to IEC 60063 by adopting only the first of each four successive values in the given range from 10.0 through 1.00 M Revision: 19-Feb-15 Document Number: 31092 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000