MCT 0603 AT - Precision Sample Kit www.vishay.com Vishay Beyschlag Sample Kit Precision Thin Film Chip Resistors MCT 0603-25 0.1 % AT FEATURES • Rated dissipation P70 up to 0.150 W • AEC-Q200 qualified • Approved to EN 140401-801 • Superior temperature cycling robustness • Sulfur resistance verified according to ASTM B 809 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Files contain lengths of cardboard tape, each holding 20 resistors. The kit contains every fourth value of the E 96-series. Parts are sorted in the ascending order of its resistance value and appropriately marked. SPECIFICATIONS Laboratory kit LCT AT 96/4 Resistor type MCT 0603-25 0.1 % AT Temperature coefficient ± 25 ppm/K Tolerance ± 0.1 % 47 to 511 k/every 4th value of E 96 (1) Resistance range/E-series Number of resistance values 98 Resistors per value/total 20/1960 Number of pages/files 10/1 Notes • The products are specified by the underlying standard product’s datasheet “Precision Thin Film Chip Resistors Superior Moisture Resistivity” in its most current edition at www.vishay.com/doc?28785 (1) Supplemented by 47R PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: LCT964MCT0603MDB00 L C T 9 6 4 M C T 0 6 0 3 M D B 0 0 KIT E-SERIES FRACTION OF E-SERIES TYPE/SIZE VERSION TCR TOLERANCE LCT 96 4 = 1/4 MCT 0603 M = AT D = ± 25 ppm/K B = ± 0.1 % PRODUCT DESCRIPTION: LCT 96 4 MCT 0603-25 0.1 % AT LCT 96 4 MCT 0603 -25 0.1 % AT KIT E-SERIES FRACTION OF E-SERIES TYPE/SIZE TCR TOLERANCE VERSION LCT 96 4 = 1/4 MCT 0603 ± 25 ppm/K ± 0.1 % AT Note • The product can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION Revision: 27-Oct-14 Document Number: 28858 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000