MCS 0402 - Precision Sample Kit www.vishay.com Vishay Beyschlag Sample Kit Precision Thin Film Chip Resistors MCS 0402-25 0.1 % FEATURES • Approved to EN 140401 -801 • Superior overall stability: class 0.1 and 0.25 • Waste gas resistance verified by ASTM B 809 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Files contain lengths of cardboard tape, each holding 40 resistors. The kit contains every fourth value of the E96-series. Parts are sorted in the ascending order of its resistance value and appropriately marked. SPECIFICATIONS Laboratory kit LCS 96/4 Resistor type MCS 0402-25 0.1 % Temperature coefficient ± 25 ppm/K Tolerance ± 0.1 % 47 to 221 k/every 4th value of E 96 (1) Resistance range/E-series Number of resistance values 90 Resistors per value/total 40/3600 Number of pages/files 9/1 Notes • The products are specified by the underlying standard product’s datasheet “Precision Thin Film Chip Resistors” in its most current edition at www.vishay.com/doc?28700 (1) Supplemented by 47R and 221K PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: LCS964MCS04020DB00 L C S 9 6 4 M C S 0 4 0 2 0 D B 0 0 KIT E-SERIES FRACTION OF E-SERIES TYPE/SIZE VERSION TCR TOLERANCE LCS 96 4 = 1/4 MCS 0402 0 = Standard D = ± 25 ppm/K B = ± 0.1 % PRODUCT DESCRIPTION: LCS 96 4 MCS 0402-25 0.1 % LCS 96 4 MCS 0402 -25 0.1 % KIT E-SERIES FRACTION OF E-SERIES TYPE/SIZE TCR TOLERANCE LCS 96 4 = 1/4 MCS 0402 ± 25 ppm/K ± 0.1 % Note • The product can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION Revision: 27-Oct-14 Document Number: 28859 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000