Wirewound Through Hole Resistor Packaging Vishay Dale WIREWOUND REEL PACKAGING Dimensions in mm (inches) A B Note (1) Øhole 40.48 ± 11.91 (1.594 ± 0.469) STANDARD PACKAGING CODE GLOBAL MODEL LEAD (Pb)-FREE TIN/LEAD NON-STANDARD MAXIMUM UNITS/REEL (2) MINIMUM QTY MULTIPLE TAPE SMALL PITCH (2) QTY SPACING (2) FLANGE “B” 190.50 (7.500) 5.08 52.39 1000 2000 (0.200) (2.062) 5.08 52.39 1000 2000 (0.200) (2.062) CW1/2, G001...80, G002, RS1/4, RS1/2 E70 S70 1000 RWR81, RWR82 N/A S70 1000 CW001, CW01M, G003...80, RS01A, RS01M E70 S70 1000 1000 RWR80 N/A S70 1000 1000 LVR01, NS01A E70 S70 1000 1000 CA0001, CA0002 (3) E05 R05 250 1 CW02B, CW02M, G005, RS02B, RS02M E70 S70 1000 RWR89 N/A S70 CW02C, CW002, G05C, LVR03, RS002, RS02C E70 RWR71 5.08 (0.200) 52.39 (2.062) 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 52.39 (2.062) 52.39 (2.062) 73.02 (2.875) 1000 10.16 (0.400) 1000 1000 S70 1000 N/A S70 CW005, CW007, G010, RS005, RS007 E73 RWR74 LARGE FLANGE “A” 280.99 (11.062) 5000 5000 1500 4500 1500 4500 1000 4000 1350 2500 63.5 (2.500) 400 1200 10.16 (0.400) 63.5 (2.500) 400 1200 1000 10.16 (0.400) 63.5 (2.500) 400 1000 1000 1000 10.16 (0.400) 73.02 (2.875) 400 1200 S73 500 500 10.16 (0.400) 73.02 (2.875) N/A 700 N/A S73 500 500 1000 E73 S73 500 500 N/A 600 CW010, RS010 E73 S73 500 500 N/A 600 RWR78, RWR84 N/A S73 500 500 73.02 (2.875) 73.02 (2.875) 85.72 (3.375) 85.72 (3.375) N/A LVR05 10.16 (0.400) 10.16 (0.400) 10.16 (0.400) 10.16 (0.400) N/A 600 Notes (1) Leads will be trimmed to a maximum of 1.59 mm (0.063") beyond tape edge. (2) For non-standard tape and reel requirements, contact the technical question e-mail address at the bottom of the page. (3) CA0001 and CA0002 will be taped at 5.08 mm (0.200") pitch, 73.02 mm (2.875") tape space, without lead trim. CA4000 and CA5000 series will be taped at 5.08 mm (0.200") pitch, tape space varies by body length. Document Number: 21028 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 1 Wirewound Through Hole Resistor Packaging Vishay Dale WIREWOUND BULK PACKAGING Dimensions in mm (inches) H L W PACKAGING CODE L W H MINIMUM QTY MULTIPLE QTY B12 92.1 (3.625) 38.1 (1.500) 38.1 (1.500) 100 100 N/A B12 92.1 (3.625) 38.1 (1.500) 38.1 (1.500) 100 100 CW002, RS002 E12 B12 104.8 (4.125) 76.2 (3.000) 57.1 (2.250) 100 100 RWR71 N/A B12 104.8 (4.125) 76.2 (3.000) 57.1 (2.250) 100 100 CW02M, CW02B, G005, RS02B, RS02M E12 B12 98.4 (3.875) 50.8 (2.000) 50.8 (2.000) 100 100 RWR89 N/A B12 98.4 (3.875) 50.8 (2.000) 50.8 (2.000) 100 100 CW02C, G05C, LVR03 RS02C E12 B12 101.6 (4.000) 66.7 (2.625) 63.5 (2.500) 100 100 CW005, G010, LVR05 RS005 E12 B12 107.9 (4.125) 76.2 (3.000) 88.9 (3.500) 100 100 RWR74, RWR84 N/A B12 107.9 (4.125) 76.2 (3.000) 88.9 (3.500) 100 100 CW007, RS007 E12 B12 117.5 (4.625) 98.4 (3.875) 63.5 (2.500) 100 100 CW010, RS010 E12 B12 133.3 (5.250) 101.6 (4.000) 101.6 (4.000) 100 100 RWR78 N/A B12 133.3 (5.250) 101.6 (4.000) 101.6 (4.000) 100 100 GLOBAL MODEL LEAD (Pb)-FREE TIN/LEAD CW1/2, G001...80, G002, RS1/4, RS1/2, RS01M, CW001, CW01M, G003…80, LVR01, RS01A E12 RWR80, RWR81, RWR82 www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 21028 Revision: 22-Dec-10 Wirewound Through Hole Resistor Packaging Vishay Dale WIREWOUND BULK PACKAGING Dimensions in mm (inches) H L W PACKAGING CODE L W H MAX. QTY PER BOX MINIMUM QTY MULTIPLE QTY B14 190.5 (7.500) 104.8 (4.125) 190.5 (7.500) 2000 10 1 E14 B14 298.4 (11.750) 174.6 (6.875) 228.6 (9.000) 1850 10 1 CP0003, CP0003...3, CPL03, CPL03...3, CPW03, CPW03...3, CP0005, CP0005...3, CPL05, CPL05...3, CPW05, CPW05...3 E14 B14 298.4 (11.750) 174.6 (6.875) 228.6 (9.000) 1250 10 1 CP0007, CP0007...3, CPL07, CPL07...3, CPW07, CPW07...3 E14 B14 304.8 (12.000) 184.1 (7.250) 152.4 (6.000) 250 10 1 CP0010, CP0010...3, CPL10, CPL10...3, CPW10, CPW10...3 E14 B14 304.8 (12.000) 184.1 (7.250) 152.4 (6.000) 250 5 1 CP0015, CP0015...3, CPL15, CPL15...3, CPW15, CPW15...3, CP0020, CP0020...3, CPW20, CPW20...3 E14 B14 304.8 (12.000) 184.1 (7.250) 152.4 (6.000) 160 5 1 CP0022, CP0022...3 E14 B14 304.8 (12.000) 184.1 (7.250) 152.4 (6.000) 160 5 1 CP0025 E14 B14 304.8 (12.000) 184.1 (7.250) 152.4 (6.000) 90 5 1 CPCx02 E32 B32 304.8 (12.000) 184.1 (7.250) 76.2 (3.000) 1000 10 1 CPCx03, CPCx05 E32 B32 304.8 (12.000) 184.1 (7.250) 76.2 (3.000) 500 10 1 CPCx10 E32 B32 304.8 (12.000) 184.1 (7.250) 76.2 (3.000) 350 10 1 CPR03, CPR05 E14 B14 298.4 (11.750) 174.6 (6.875) 228.6 (9.000) 1000 10 1 SR1, SR3, SR5 E14 B14 304.8 (12.000) 184.1 (7.250) 76.2 (3.000) 1000 1000 1000 GLOBAL MODEL LEAD (Pb)-FREE TIN/LEAD CA0001, CA0002 E14 CP0002, CP0002...3, CPW02, CPW02...3 Document Number: 21028 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 3 Wirewound Through Hole Resistor Packaging Vishay Dale WIREWOUND LACER PACKAGING Dimensions in mm (inches) A • Resistor body is placed in slot and held in place with tongue insert. • Terminals protected within folder. B PACKAGING CODE A B MINIMUM QTY MULTIPLE QTY L03 215.90 (8.500) 95.25 (3.750) 20 20 N/A L03 215.90 (8.500) 95.25 (3.750) 20 20 CW02B, CW02C, CW02M, G005, G05C, LVR03, RS02B, RS02C, RS02M E03 L03 215.90 (8.500) 101.6 (4.000) 20 20 RWR71, RWR89 N/A L03 215.90 (8.500) 101.6 (4.000) 20 20 CW002, RS002 E03 L03 279.40 (11.000) 127.00 (5.000) 20 20 CW005, CW007, G010, LVR05, RS005 E03 L03 307.97 (12.125) 131.76 (5.188) 20 20 RWR74, RWR84 N/A L03 307.97 (12.125) 131.76 (5.188) 20 20 CW010, LVR10, RS007, RS010 E03 L03 376.24 (14.812) 153.99 (6.062) 20 20 RWR78 N/A L03 376.24 (14.812) 153.99 (6.062) 20 20 GLOBAL MODEL LEAD (Pb)-FREE TIN/LEAD CW1/2, CW001, CW01M, G001...80, G002, G003...80, LVR01, RS1/4, RS1/2, RS01A, RS01M E03 RWR80, RWR81, RWR82 WIREWOUND CARD PACKAGING • Resistor placed in slot and held in place with foldover protective paper. • Each pack perforated to tear off into four smaller sub packs. GLOBAL MODEL PACKAGING CODE QTY/PACK TEAR OFF QTY MINIMUM QTY MULTIPLE QTY C02 40 10 10 10 N/A C02 40 10 10 10 NH025, NH050, RH025, RH050 E02 C02 20 5 5 5 RER50, RER55, RER70, RER75 N/A C02 20 5 5 5 LEAD (Pb)-FREE TIN/LEAD NH005, NH010, RH005, RH010 E02 RER40, RER45, RER60, RER65 www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 21028 Revision: 22-Dec-10 Wirewound Through Hole Resistor Packaging Vishay Dale WIREWOUND SKIN PACKAGING Dimensions in mm (inches) • A versatile packaging method. • Units are placed on double-faced corrugated board, then skin packed to board with polyfilm. • Most resistor types are in multiples of five with insert strips. PACKAGING CODE LEAD (Pb)-FREE TIN/LEAD NO. OF UNITS BOARD LENGTH BOARD WIDTH MINIMUM QTY MULTIPLE QTY CP0002, CP0002...3, CP0003, CP0003...3 E01 J01 60 184.1 (7.250) 304.8 (12.000) 5 5 CP0005, CP0005...3, CP0007, CP0007...3 E01 J01 45 184.1 (7.250) 304.8 (12.000) 5 5 CP0010, CP0010...3 E01 J01 30 184.1 (7.250) 304.8 (12.000) 5 5 CP0015, CP0015...3 E01 J01 25 184.1 (7.250) 304.8 (12.000) 5 5 CP0020, CP0020...3, CP0022, CP0022...3 E01 J01 20 184.1 (7.250) 304.8 (12.000) 5 5 CPCx02, CPCx03, CPCx05 E01 J01 200 304.8 (12.000) 355.6 (14.000) 1 1 CPCx10 E01 J01 100 304.8 (12.000) 355.6 (14.000) 1 1 CPL03, CPL03...3, CPL05, CPL05...3, CPL07, CPL07...3 E01 J01 45 184.1 (7.250) 304.8 (12.000) 5 5 CPL10, CPL10...3 E01 J01 30 184.1 (7.250) 304.8 (12.000) 5 5 CPL15, CPL15...3 E01 J01 25 184.1 (7.250) 304.8 (12.000) 5 5 HL011, HL012, HL015, HL020, HLA012, HLA020, HLT015, HLT020, HLW06Rx E J 40 184.1 (7.250) 304.8 (12.000) 1 1 HL024 E J 45 304.8 (12.000) 368.3 (14.500) 1 1 HL025, HLT025, HLW15Ax, HLZ033, HLA025 E J 30 184.1 (7.250) 304.8 (12.000) 1 1 HL026, HLA026, HLT026, HLW10Ax, HLW12Rx, HLW20Ax E J 20 184.1 (7.250) 304.8 (12.000) 1 1 HL035, HL050, HL060, HLA050, HLA060, HLT050, HLT055, HLT060, HLZ090, HLZ105 E J 15 184.1 (7.250) 304.8 (12.000) 1 1 HL051, HLA051, HLT051, HLW20Rx, HLZ099 E J 10 184.1 (7.250) 304.8 (12.000) 1 1 HLM010, HLM015 E J 90 184.1 (7.250) 304.8 (12.000) 1 1 HLM020, HLW05Rx E J 60 184.1 (7.250) 304.8 (12.000) 1 1 HLW03Ax, HLW05Ax, HLW06Ax, HLW12Ax E J 25 184.1 (7.250) 304.8 (12.000) 1 1 HLW03Rx E J 80 184.1 (7.250) 304.8 (12.000) 1 1 HL055 E J 20 304.8 (12.000) 368.3 (14.500) 1 1 GLOBAL MODEL Document Number: 21028 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 5 Wirewound Through Hole Resistor Packaging Vishay Dale WIREWOUND SKIN PACKAGING Dimensions in mm (inches) - continued • A versatile packaging method. • Units are placed on double-faced corrugated board, then skin packed to board with polyfilm. • Most resistor types are in multiples of five with insert strips. PACKAGING CODE LEAD (Pb)-FREE TIN/LEAD NO. OF UNITS BOARD LENGTH BOARD WIDTH MINIMUM QTY MULTIPLE QTY HL065, HL070, HL080, HL095, HLA065, HLA080, HLA100, HLT065, HLT070, HLT080, HLT095, HLT100, HLZ110, HLZ140, HLZ165 E J 5 184.1 (7.250) 304.8 (12.000) 1 1 HL100 E J 13 304.8 (12.000) 368.3 (14.500) 1 1 HL120, HL130, HL160, HL175, HLA120, HLA130, HLA160, HLA175, HLT120, HLT130, HLT160, HLT175, HLZ220, HLZ240, HLZ275, HLZ300 E J 3 184.1 (7.250) 304.8 (12.000) 1 1 HL225, HLA225, HLT225, HLZ375 E J 8 304.8 (12.000) 368.3 (14.500) 1 1 RH005, RH010 E01 J01 60 184.1 (7.250) 304.8 (12.000) 1 1 RH025 E01 J01 30 184.1 (7.250) 304.8 (12.000) 1 1 RH050 E01 J01 20 184.1 (7.250) 304.8 (12.000) 1 1 RH100 E01 J01 5 304.8 (12.000) 368.3 (14.500) 1 1 RH250 E01 J01 4 304.8 (12.000) 368.3 (14.500) 1 1 RER40, RER45, RER60, RER65 N/A J01 60 184.1 (7.250) 304.8 (12.000) 1 1 RER50, RER70 N/A J01 30 184.1 (7.250) 304.8 (12.000) 1 1 RER55, RER75 N/A J01 20 184.1 (7.250) 304.8 (12.000) 1 1 SPR2213 K D 15 184.1 (7.250) 304.8 (12.000) 1 1 SPR2214 K D 10 184.1 (7.250) 304.8 (12.000) 1 1 GLOBAL MODEL www.vishay.com 6 For technical questions, contact: [email protected] Document Number: 21028 Revision: 22-Dec-10 Wirewound Through Hole Resistor Packaging Vishay Dale WIREWOUND AMMOPACK Dimensions in mm (inches) • Resistors are lead taped, the same as in reel pack, then they are placed in a continuous "S" pattern (without paper inner leaf) in an appropriate box. PACKAGING CODE GLOBAL MODEL PITCH TAPE SPACING MINIMUM QTY MULTIPLE QTY LEAD (Pb)-FREE TIN/LEAD CW1/2, CW001, CW01M, RWR81, RWR82, RWR80, G001...80, G002, G003...80, LVR01, RS1/4, RS1/2, RS01A, RS01M N/A K36 5.08 (0.200) 52.39 (2.062) 200 1 CW002, CW02B, CW02C, CW02M, RWR89, G005, G05C, LVR03, RS002, RS02B, RS02C, RS02M N/A K50 10.16 (0.400) 63.5 (2.500) 200 1 CW005, CW007, RWR71, RWR84, RWR74, G010, LVR05, RS005, RS007 N/A K14 10.16 (0.400) 73.02 (2.875) 200 1 CW010, RWR78, RS010 N/A K69 10.16 (0.400) 85.72 (3.375) 200 1 Document Number: 21028 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 7