V ish ay I ntertechn o l o g y, I nc . Resistors - Power Resistors for Heatsink Mounting I INNOVAT AND TEC O L OGY LPS 300, LPS 600, LPS 800 N HN POWER THICK FILM RESISTORS O 19 62-2012 Thick Film Power Resistors Heatsink Mounting Key Benefits • • • • • • High-power dissipation: 300 W, 600 W, and 800 W at 85 °C Small size: 57 mm x 60 mm Non-inductive: < 0.1 µH Wide resistance range: from 0.3 Ω to 900 kΩ, E24 series High-dielectric strength: up to 12 kVRMS Low weight: 83 g APPLICATIONS • • • • • • Wind turbines Inverters Converters Snubbers Discharge resistors Power supplies in trains and medical equipment Resources • • • • Datasheet: LPS 300 - http://www.vishay.com/doc?50052 Datasheet: LPS 600 - http://www.vishay.com/doc?50053 Datasheet: LPS 800 - http://www.vishay.com/doc?50054 For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0168-1202 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V ish ay I ntertechn o l o g y, I nc . Resistors - Power Resistors for Heatsink Mounting I INNOVAT LPS 800 Vishay Sfernice LPS 600 Vishay Sfernice Thick Film Power Resistors Power Resistor for Mounting onto a Heatsink Vishay Sfernice Power Resistor forfor Mounting onto a Heatsink Power Resistor Mounting onto a Heatsink Heatsink Thick FilmMounting Technology Thick Film Technology Thick Film Technology 19 62-2012 LPS 800 FEATURES Power Resistor forFEATURES Mounting onto aPOWER HeatsinkRATING Vishay FEATURES • 800 WW, at 85 °C bottom case Thick Technology • 300 Film W, 600 and 800 W attemperature 85 °C case temperature OVERLOADS AND TEC O L OGY LPS 300, LPS 600, LPS 800 LPS 600 N HN POWER THICK FILM RESISTORS O Sfernice In any case the applied voltage must be lower than U = 5000 Wide resistance 0.3 Ω temperature to 900 kΩ The of the case should be maintained within the ••L600 W atV.85 range: °C bottom case temperature E24 series range: 0.3 Ω to 900 kΩ E24 series • Wide resistance Short time overload: 2 x Pr/10 s limits specified in the following figure. POWER RATING OVERLOADS • resistance range: 0.3 Ω to 900 kΩ • Wide Non inductive LPSoverload: 600 The values indicated=Non Accidental on the following inductive To optimize the thermal conduction, contacting surfaces In any case the applied voltage must be lower than U• series • E24 Easy mounting L 5000 V. of the case should be maintained within the graph are applicable to resistors in air or mounted onto a The temperature should coated with silicone grease or thermal film, and limits specified the be following figure. ShortVishay time overload: 1.5 x Pr/10 s • Low thermal radiation of theincase • Easy•mounting Sfernice Non inductive heatsink. heatsink mounting screws tightened to 2 Nm. Toto RoHS optimize the 2002/95/EC thermal conduction, contacting surfaces Accidental overload: The values indicated on the following • Compliant directive Lowa thermal radiation the case • Easy mounting should beof coated with silicone grease or thermal film, and graph are applicable to resistors in air or mounted•onto ENERGY CURVE heatsink. heatsink mounting screws tightened to 2 Nm. LPS 800 Power Resistor for Mounting onto • Low thermal radiation the case a Heatsink • Compliant to RoHS directive of 2002/95/EC DIMENSIONS in millimeters ENERGY IN IN JJ ENERGY ust be lower than UL = 5000 V. 10 s es indicated on the following s in air or mounted onto a 10-3 The temperature of the be maintained within the 60100 100 limits specified in the following figure. 36 To optimize the thermal conduction, contacting surfaces 64.7 10 10be coated with silicone grease or thermal film, and should heatsink mounting screws tightened to 2 Nm. 2 x M4 useful depth: 8 2 x1Ø 4.2 1 LPS 600 6K8 5 %34 57 V2 0.1 10-5 10-4 10-3 10-2 10-1 10-6 100 Note 0.1 -5 ± 0.2 mm -4 DURATION • Tolerances 10OVERLOAD 10 10-3 IN s 10-2 10-6unless stated: 80 RATED DISSIPATION IN % 60 10-2 LPS 800 I5U 5 % V2should case 36 DIMENSIONS in millimeters MECHANICAL SPECIFICATIONS OVERLOAD DURATION IN 64.7 s MARKING 2 x Ø 4.2 Mechanical Protection Insulated case UL 94 V-0 60 DIMENSIONS in millimeters Series, style, ohmic value (in Ω), tolerance Resistive Element Thick film MARKING 2 x M4 useful depth: 8 • 600 W80at 85 °C bottom case temperature 80 25.2 21.2 15.2 60 • Wide resistance range: 25.8 ±0.3 1 Ω to 900 kΩ 60 E24 series • Non inductive 40 0 PACKAGING Temperature Range MODEL tolerance (in %), Protection Mechanical Insulated Climatic Category Box of 15 2 xunits Ø 4.2 (in Ω), rnice trademark. Resistive Element - 55 °C to 175 °C STYLE case UL 94 V-0 55/175/56 150 PACKAGING 200 - 55 °C/175 °C TOLERANCE IEC 60115-1 ±1% 200 Ø 20 13.6 800 W at + 85 °C Box bottom of 15 case units temperature RTH (j - c): 0.112 °C/W 25.2 R ≤ 1 U: ± 500 ppm/°C BO15 21.2ppm/°C 1 U < R ≤ 10 U: ± 300 Standard ± 15.2 150 ppm/°C CUSTOM 10 U < R: PACKAGING xxx DESIGN Limiting Element Voltage UL 100 kΩ 150 155 25.8 ± 1 ± 1 % to ± 10 % PACKAGING Temperature Coefficient ±1% 200 BOTTOM CASE TEMPERATURE IN °C 0.3 Ω to 900 kΩ Box of 15 units Tolerances (Standard) ORDERING INFORMATION - On Connections 2 Nm SPECIFICATIONS LPS 600 MECHANICALENVIRONMENTAL SPECIFICATIONS 100 ELECTRICAL SPECIFICATIONS Resistance Range manufacturing date, Vishay Sfernice trademark. Substrate Alumina 40 -1 50 85 175 0 0 CASE TEMPERATURE 50 100 BOTTOM IN °C 85 15.2 Series, style, ohmicScrews value (in Rating %),and End Connections M4 (in Ω), tolerance Power Tightening manufacturing date, Vishay Sfernice trademark. Thermal Resistance 20 34 Torque 10 1 Note DURATION IN s• Tolerances unless Ø 20 13.6 of the case • Low thermal radiation 20 25.2 • 21.2 Compliant to RoHS directive 2002/95/EC 1 (in %), LPS 600 57 6K8 5 % - OnLPS 2 Nm 0Heatsink 800 V2 100 kΩ 600 Torque 50 100 150 Maximum 2.5 Nm 85 175 MODEL STYLE RESISTANCE Weight ± 0.2 mm 83 g ± 10 % stated: BOTTOM CASE TEMPERATURE 36 VALUEIN °C ORDERING INFORMATION 40 • Easy mounting 20 0 10 FEATURES 100 1 -1 RATED DISSIPATION IN % 1000 1000 POWER RATING DIMENSIONS in millimeter s RATED DISSIPATION IN % Power Resistor for Mounting onto CURVE a Heatsink ENERGY 10 000 Thick FilmtoTechnology Vishay Sfernice 25.8 ± 1 • Compliant RoHS directive 2002/95/EC 10 000 Thick Film Technology 100 POWER RATING CHART 64.7 Optional e LEAD (Pb)-FREE 5 kV Dielectric ±1% xxx ± 2 % Strength on request: IEC 1 min, Special TCR,7 kVRMS or 12 kVRMS ± 560115-1, % 10 mA max. RESISTANCE TOLERANCE CUSTOM ELECTRICAL SPECIFICATIONS ±depth: 10 % 8 shape etc. 2 x M4 useful VALUE Resistance Range BO15 e PACKAGING 0.3 Ω to 900 kΩ 4 DESIGN LEAD (Pb)-FREE Insulation Resistance ≥ 10 MΩ Ø 20 Thick film 13.6 ±1% Optional 0.1 µH Inductance ≤ Tolerances (Standard) ± 1 % to ± 10 % Substrate 34 INFORMATION GLOBALAlumina PART NUMBER ±2% on request: Critical Resistance 31.25 kΩ 57 TION 600 W at + 85 °C ± 5and % Special TCR, End Connections Screws M4 Power Rating L P S 0 8 0 0 H 4 7 R 0 Jbottom ± 10 % shape etc.B case temperature 100 kΩ ±1% xxx unless stated: BO15± 0.2 mm e Tightening Torque Note Thermal Resistance Tolerance RTH (j - c): 0.112 °C/W • Tolerances unless stated: ± 0.2For mm Document Number: 50054 technical questions, contact: [email protected] www.vishay.com RESISTANCE TOLERANCE CUSTOM PACKAGING LEAD (Pb)-FREE - On Connections 2 Nm Revision: 27-Oct-10 67 VALUE DESIGN Temperature Coefficient GLOBAL2 Nm R ≤ 1 U: ± 500 ppm/°C - On Heatsink SPECIAL DIELECTRIC OHMIC VALUE TOLERANCE PACKAGING MECHANICAL SPECIFICATIONS ± 1 % GLOBAL PART NUMBER INFORMATION MODELOptional ELECTRICAL 1 U <SPECIFICATIONS R ≤ 10 U: ± 300 ppm/°C ±2% on2.5 request: - 55 °C/155 °C Maximum Torque Nm Standard Mechanical Protection case UL 94 V-0 60115-1 F = 1 % U < R: ± 150 LPS 800 L = Dielectric Insulated The first three digits = Box 10 15 pieces Asppm/°C applicable ±5% Special TCR, IECare ResistanceB Range Weight 83 g ±L10strength % P 7 kV S 0 6figures and 0 the 0 7 R 0 J ZAx0.3BΩ to 900 kΩ significant GH= 2 % 4 ± 10 % shape etc. Resistive Element Thick film Substrate H = Dielectric last digit specifies the J = 5Voltage % Tolerances Limiting Element UL (Standard) strength 12 kV Alumina number of zeros to follow. R K = 10 % 5 kV ± 1 % to ± 10 % ENVIRONMENTAL decimal point. Dielectric Strength EndSPECIFICATIONS Connections Screwsdesignates M4 600 W at + 85 °C Power Rating and bottom case temperature 12 kV IEC SPECIAL OHMIC VALUE 1 min,Thermal TOLERANCE RMS 48R7 = 48.7 Ω 60115-1, Resistance7 kVRMS orPACKAGING RTH (j - c): 0.112 °C/W 10 mA max. 47R0 = 47 Ω ER INFORMATION GLOBAL DIELECTRIC Torque Temperature Range Tightening - 55 °C to 155 °C MODEL 0 8 0 0 H 4 7 Connections R 0 J B Nm - On 2 Climatic Category 55/155/56 1001 = 1first kΩ three digits are Temperature LPS 600 L = Dielectric The F = 1Coefficient % B = Box 15 pieces As applicable Insulation Resistance ≥ 104 MΩ R ≤ 1 U: ± 500 ppm/°C - On Heatsink 2 Nm 4R70 = 4.7 Ω strength 7 kV significant figures and the G=2% ZAx 1 U < R ≤ 10 U: ± 300 ppm/°C R240 = 0.24 Ω - 55 °C/155 °C Maximum Torque PACKAGING 2.5 Nm Standard H = Dielectric last digit specifies the J=5% SPECIAL Inductance ≤ 0.1 µH 10 U < R: ± 150 ppm/°C RIC OHMIC VALUE TOLERANCE IEC 60115-1 Weight strength 83 12 g kV± 10 % number of zeros to follow. R K = 10 % Critical Resistance kΩ ctric The first three digits are F=1% B = Box 15 pieces As applicable 5 kV UL designates decimal point. Limiting Element Voltage 41.66 significant figures and theDocument G Number: =2% ZAxquestions, contact: [email protected] 50054 For technical www.vishay.com ENVIRONMENTAL SPECIFICATIONS Dielectric Strength 48R7 = 48.7 Ω last digit specifies the Revision:J27-Oct-10 =5% 69 IEC 60115-1, 1 min, 7 kVRMS or 12 kVRMS number of zeros to follow. R K = 10 % 47R0 = 47 Ω Temperature RangeFor technical - 55 °C to 155 °C www.vishay.com questions, contact: [email protected] 10 mA max. Document Number: 50053 designates decimal point. 1001 = 1 kΩ 64 48R7 = 48.7 Ω 47R0 = 47 Ω 1001 = 1 kΩ 4R70 = 4.7 Ω R240 = 0.24 Ω Revision 27-Oct-10 7 kV ctric 2 kV Climatic Category www.vishay.com 66 PRODUCT SHEET www.vishay.com For technical questions, contact: [email protected] 64 55/155/56 4R70 = 4.7 Ω R240 = 0.24 Ω Insulation Resistance Revision: 27-Oct-10 ≥ 104 MΩ Inductance ≤ 0.1 µH Critical Resistance 41.66 kΩ For technical questions, contact: [email protected] 2/2 For technical questions, contact: [email protected] www.vishay.com 69 Document Number: 50053 Revision: 27-Oct-10 VMN-PT0168-1202 Document Number: 50053 Revision: 27-Oct-10 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000