Product Sheet

V is h ay I n t e rt e c h n olo g y, I n c .
I
INNOVAT
AND TEC
O L OGY
MIC
N
HN
THIN FILM RESISTOR
O
19
62-2012
Resistors - Suitable for Microwave Circuits
Thin Film Microwave Chip Resistors
Key Benefits
•
•
•
•
•
Low shunt capacitance: < 0.2 pF
Resistance range: 2 Ω to 20 kΩ
Tolerances: to 1.0 %
Small size: 0.020 in. x 0.040 in.
Strip-line compatibility
APPLICATIONS
•
•
•
•
Couplers
Attenuators
Amplifiers
Oscillators
Resources
• Datasheet: MIC - http://www.vishay.com/doc?61037
• For technical questions contact [email protected]
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
PRODUCT SHEET
1/2
VMN-PT9068-1202
This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Thin
Thin Film
Film Microwave
MicrowaveVResistor
Resistor
is h ay I n t e rt e c h n olo g y,
FEATURES
FEATURES
I
INNOVAT
O L OGY
• High frequency
• Small single chip
size: 0.020"
x 0.040"
Vishay
Electro-Films
• Small single chip
size: 0.020"
x 0.040"
19
• Case: 0402
62-2012
• Case: 0402
• Microwave resistance range: 20  to 1 k
• Microwave resistance range: 20  to 1 k
• Overall resistance range: 20  to 20 k
• Overall resistance range: 20  to 20 k
FEATURES
• Alumina substrate
• Wire bondable
• Alumina substrate
• Low stray capacitance: < 0.2 pF
• High frequency
• Low stray capacitance: < 0.2 pF
Product may not be to scale
Product may not be to scale
• Resistor
nitride, self passivating
• Small single
chip size:material:
0.020" x Tantalum
0.040"
• Resistor
material:
Tantalum
nitride, self passivating
The MIC resistor chips on alumina are designed with
low
• Moisture resistant
•
Case:
0402
FEATURES
APPLICATIONS
The MIC resistor chips on alumina are designed with low
•
Moisture
resistant
shunt capacitance. Most lower value resistor geometrics are
• Wire
bondable resistance range: 20  to 1 k
Vishay EFI MIC chip resistors provide
shunt capacitance. Most lower value resistor geometrics
•are
Microwave
compatible with strip lines, making them ideally suited for
APPLICATIONS
excellent high-frequency response and compatible with strip lines, making them ideally suited
for
APPLICATIONS
•
High
frequency
•
Overall
resistance
range:
20

to
20
k
microwave circuits.
Vishay EFI MIC chip area
resistors
provide
excellent
ideally suited
for prototyping.
microwave circuits.
Vishay
EFI x MIC
• Alumina
• Small
single substrate
chip
size: 0.020"
0.040" chip resistors provide excellent
These chips are manufactured using Vishay Electro-Films
high-frequency response Typical
and application
are ideally
suited
for
areas
are:
These chips are manufactured using Vishay Electro-Films
high-frequency
response
and
are
ideally
suited
for
• Low
stray prototyping.
capacitance: < 0.2 pF
• Case:
0402
(EFI) sophisticated
Thin
Film
equipment and manufacturing
Product
may
not
be
to
scale
(EFI) sophisticated Thin Film equipment and manufacturing
prototyping.
•
Amplifiers
technology. The MICs are 100 % electrically tested
•and
Resistorresistance
material:
Tantalum
passivating
• Microwave
20 Ωnitride,
toareas
1 kΩself
Typical range:
application
are:
technology. The MICs are 100 % electrically tested
and
Typical application areas are:
• Oscillators
visually
MIL-STD-883.
The MIC
resistorinspected
chips on to
alumina
are designed with low
• Moisture
resistant
• Overall
resistance
range:
20
Ω
to
20
kΩ
visually
inspected
to
MIL-STD-883.
• Amplifiers
shunt capacitance. Most lower value resistor geometrics are
• Amplifiers
• Attenuators
• Alumina substrate
www.vishay.com
• Oscillators
compatible with strip lines,
making them ideally suited for
APPLICATIONS
Vishay
• Oscillators
• Couplers Electro-Films
• Low stray capacitance:
< 0.2 pF
microwave circuits.
Attenuators
Vishay EFI•
MIC chip resistors provide excellent
• Attenuators
• Filters
• Resistor
material:
Tantalum
nitride,
These chips
are manufactured
using Vishay Electro-Films
high-frequency
response
andselfare ideally suited for
• Couplers
DIMENSIONS
in inches
•
Couplers
(EFI) sophisticated Thin Film equipment and manufacturing
prototyping.
passivating
• Filters
0.020
0.020
0.020
technology. The MICs are 100 % electrically
tested and
• Filters
Typical
application
areas are:
• Moisture
resistant
www.vishay.com
MIC
Thin Film Microwave Resistor
Thin Film Microwave Chip Resistors
www.vishay.com
visually inspected to MIL-STD-883.
FEATURES
• Wire bondable
• High frequency
• Small single chip size: 0.020" x 0.040"
• Case: 0402
• Microwave resistance range: 20  to 1 k
• Alumina substrate
• Overall resistance range: 20  to 20 k
• Low stray capacitance: < 0.2 pF
• Resistor material: Tantalum nitride, self passivating
• Moisture resistant
APPLICATIONS
MIC
• Amplifiers
TEMPERATURE COEFFICIENT OF RESISTANCE,
VALUES, AND TOLERANCES
• Oscillators
TEMPERATURE COEFFICIENT OF RESISTANCE,
VALUES, AND TOLERANCES
PARAMETER
VALUE
• Attenuators
PARAMETER
VALUE
Resistance Range
2 to 20K
•
Couplers
Resistance Range
2 to 20K
0.040
0.040
Tolerances
±1
• Filters
Tolerances
±1
TCR
± 25, ± 50, ± 100, ± 200
TCR
± 25, ± 50, ± 100, ± 200
Note
0.010
0.010
0.010
Note
TEMPERATURE
COEFFICIENT
OF RESISTANCE,
VALUES, AND TOLERANCES
• Only 20  to 1 k are standard strip line designs for microwave applications
• Only 20  to 1 k are standard strip line designs for microwave applications VALUE
PARAMETER
Resistance Range
Tolerances
STANDARD
TCR
0.012
Vishay Electro-Films
0.012
ELECTRICAL
SPECIFICATIONS
TYPICAL RANGE
TYPICAL RANGE
STANDARD ELECTRICAL
2 Ω to 6 Ω SPECIFICATIONS 6.2 Ω to 19 Ω
UNIT
UNIT


%
%
ppm/°C
ppm/°C
0.040
UNIT
2 to 20K
0.012

±1
TYPICAL RANGE
20 Ω to 20 kΩ
%
ppm/°C
UNIT
VALUE
UNIT
20
typ.
dB
IMPEDANCE VS.
FREQUENCY
- 20 typ.
dB
±
0.1
max.
R/R
%
x 40
50 , 20 mil
www.vishay.com
Moisture Resistance, MIL-STD-202, Method 106
± 0.1
max.mil
R/RSIZE
%
50.40
Stability, 1000 h, + 125 °C, 62 mW
± 0.2 max. R/R
%
Stability, 1000 h, + 125 °C, 62 mW
± 0.2 max. R/R
%
50.30
Operating
Temperature Range
- 55 to + 125
°C
STANDARD
ELECTRICAL
SPECIFICATIONS
Operating
Temperature Range
- 55 to + 125
°C
DIMENSIONS
in
inches
50.20
Thermal
Shock,
MIL-STD-202,
Method
107,
Test
Condition
F
±
0.1
max.
R/R
%
PARAMETER
VALUE
UNIT
Thermal Shock, MIL-STD-202, Method 107, Test Condition F
± 0.1 max. R/R
%
50.10
High Temperature
+ 150 °C, 1000 h
%
0.020 - 20 typ. ± 0.2 max. R/R
0.020 dB
Noise, MIL-STD-202,
MethodExposure
308
High Temperature Exposure + 150 °C, 1000 h
±
0.2
max.
R/R
%
50.00
MoistureDielectric
Resistance,
MIL-STD-202,
Method 106
± 0.1 max. R/R
%
Voltage
Breakdown
400
V
Dielectric Voltage Breakdown
400
V
49.90
Stability, Insulation
1000 h, + 125
°C,
62
mW
±
0.2 max. R/R 1012 min.
%
www.vishay.com
Resistance

12
Insulation Resistance
10 min.

49.80
Operating
Temperature
Range
- 55 to + 125 100 max.
°C
Operating
Voltage
V
Operating Voltage
100 max.
V
49.70
Thermal Shock,
MIL-STD-202,
107, Test to
Condition
F150 °C)
± 0.1 max. R/R 0.125 max.
%
DC Power
Rating at +Method
70 °C (Derated
Zero
at
W
DIMENSIONS
in inches 49.60
DC PowerExposure
Rating at+ +
70°C,
°C 1000
(Derated
to Zero
at 150 °C)
0.125 max.
W
High Temperature
150
h
±
0.2
max.
R/R
%
0.00 E + 00 5.00 E +±080.1
1.00max.
E + 09 R/R
1.50 E + 0.9 2.00 E + 09 2.50 E + 09 3.00 E + 09
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
%3.50 E + 09
0.040
0.040
x RatedBreakdown
Power Short-Time Overload, + 25 °C, 5 s
± 0.1 max. R/R
%
0.020 400
FREQUENCY0.020
(Hz) V
Dielectric5Voltage
PARAMETER
PARAMETER
± 25, ± 50, ± 100, ± 200VALUE
Noise, MIL-STD-202, Method 308
Note
SCHEMATIC
Noise, MIL-STD-202, Method 308
• Only 20Moisture
 to 1 kResistance,
are standardMIL-STD-202,
strip line designs
for microwave
applications
Method
106
IMPEDANCE (Ω)
MIC
Vishay EFI MIC chip resistors provide excellent
high-frequency response and are ideally suited for
prototyping.
1012 min.
Insulation Resistance
MECHANICAL SPECIFICATIONS
Operating Voltage
PARAMETER
100 max.
0.010
DC Power Rating at + 70 °C (Derated to Zero at 150 °C)
Vish
0.020
Vis
0.020

V
0.010
0.125 max.
0.010
W
Chip Size
0.020" x 0.040" ± 0.003" (0.5 mm x 1.0 mm ± 0.076 mm)
5 x Rated
Power 21-Jul-11
Short-Time Overload, + 25 °C, 5 s
± 0.1 max. R/R
%
Revision:
Document
Number: 61037
1
0.012
Chip Thickness
0.010" ± 0.002" (0.254 mm ± 0.05
mm)
0.012
0.012
Revision:
21-Jul-11
Document Number: 61037
1
For technical questions, contact: [email protected]
TYPICAL RANG
Chip Substrate Material
99.6 %0.040
alumina, 2 μ" to 4TYPICAL
μ" finishRANGE 0.040
For technical questions,TYPICAL
contact:RANGE
[email protected]
20 Ω to 20 kΩ
2 Ω toPRODUCTS
6Ω
6.2 ΩAND
to 19 THIS
Ω
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE
DESCRIBED HEREIN
DOCUMENT
Resistor
Tantalum
nitride, self-passivating
THISMaterial
DOCUMENT IS
SUBJECT
TOTO
CHANGE
WITHOUT
NOTICE.SET
THEFORTH
PRODUCTS
DESCRIBED
HEREIN AND THIS DOCUMENT
ARE
SUBJECT
SPECIFIC
DISCLAIMERS,
AT www.vishay.com/doc?91000
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH
www.vishay.com/doc?91000
Bonding Pad Size
0.010" xAT
0.012"
(0.254 mm x 0.30 mm) min.
SCHEMATIC
IMPEDANCE VS. FREQUEN
Revision: 21-Jul-11
Number of Pads
1
0.010
For technical questions, contact: [email protected]
Pad Material
0.010
Number: 61037
2 Document
50 ,
25 kÅ minimum gold standard
TYPICAL RANGE
2 Ω to 6 Ω
0.012
50.30
TYPICAL RAN
20 Ω to 20 k
TYPICAL RANGE50.20
6.2 Ω to 19 Ω
Global Part Number: MIC5000BKKMSNHWS
SCHEMATIC
IMPEDANCE (Ω)
GLOBAL PART NUMBER INFORMATION
0.010
20 mil x 40 mil SIZE
50.40
0.012
THISBacking
DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED
HEREINNone
AND THIS DOCUMENT
0.012
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
50.10
50.00
IMPEDANCE
VS. FREQUE
Global Part Number Description: MIC 50 10 %, 100 ppm/°C, MIC trim, SnPb termination, no back metal, class 50
H,
WS
49.90
, 20 mil x 40 mil SIZE
M
I
C
5
0
0
0
B
K
K
M
S
N
H
W
50.40
49.80
S
49.70
50.30
RESISTANCE
RESISTANCE
MULTILPLIER
CODE
MIC
First 4
C = 0.001
size
figures of
0=1
PRODUCT SHEET
MODEL
TOL.
CODE
(%)
TCR 2/2
(ppm/°C)
50.20
49.60
TRIM
STYLE
TERMINATION
MECHANICAL
M = Microwave
G = Au
F
= 1.0 E = ± 25 SPECIFICATIONS
BACK
METAL
G = Au
0.00 E + 00PACKAGING
5.00 E + 08 1.00 E + 09 1.50 E + 0.9 2.00
VISUAL
VMN-PT9068-1202
50.10
FREQUENCY
CLASS
CODE
IMPEDANCE (Ω)
Typical application areas are:
• Amplifiers
Thin Film Microwave Resistor
Product may not be to scale
The MIC resistor chips on alumina are designed with low
shunt capacitance. Most lower value resistor geometrics are
compatible with strip lines, making them ideally suited for
microwave circuits.
These chips are manufactured using Vishay Electro-Films
(EFI) sophisticated Thin Film equipment and manufacturing
technology. The MICs are 100 % electrically tested and
visually inspected to MIL-STD-883.
• Oscillators
• Attenuators
Resistors - Suitable for Microwave Circuits
O
HN
bondable
Wire
bondable RESISTOR
THIN••• Wire
FILM
MIC
High frequency
Inc.
AND TEC
N
50.00
49.90
H = Class
H
WS =
This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
S = Standard
N = None K = Class
K Waffle pack
S = SnPb
digits are
B = 0.01
G
= 2.0 C = ± 50
PARAMETER
49.80
SPECIFIC DISCLAIMERS,
SET
FORTH AT www.vishay.com/doc?91000
20 x 40
A = Al
100 min,
significant
A = 0.1
H = 2.5 K = ± 100
Chip Size
J = 5.0 L = ± 200
T = Lead (Pb)-free
0.020" x 49.70
0.040" ± 0.003" (0.5 mm x 1.0 mm
1 mult